Question

A grate inlet is placed in a sag location to intercept a flow of 0.14 m^3/s....

A grate inlet is placed in a sag location to intercept a flow of 0.14 m^3/s. Determine the size of the grate inlet necessary to keep the depth less than 15 cm.

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A rectangular pool, 10 m x 30 m, is to be filled to a depth of...
A rectangular pool, 10 m x 30 m, is to be filled to a depth of 3m. a) For a filling time of 2 hours, determine the inlet flow rate required in m^3/s b) If 6-cm diameter hoses are available, and the water velocity in each hose is not to exceed 3 m/s, determine the number of hoses required.
A 3‐m wide prismatic rectangular channel (S=0.005m/m) collects stormwater runoff in Jackson, MS. During a storm...
A 3‐m wide prismatic rectangular channel (S=0.005m/m) collects stormwater runoff in Jackson, MS. During a storm event the flow discharge reaches 15‐m3/s and a depth of 3.6‐m. If the channel bottom is 1‐ft above the reference datum, determine the total energy head for the specified flow conditions.
1. Water flows in a 0.2 cm, 15-m long pipe at 1.2 m/s. Determine the flow...
1. Water flows in a 0.2 cm, 15-m long pipe at 1.2 m/s. Determine the flow regime, the pressure drop across the pipe, in kPa, the head loss through the pipe in m and the volume flow rate through the pipe, in L/s. [8-31*]
1.) A liquid of density 1390 km/m^3 flows steadily through a pipe of varying diameter and...
1.) A liquid of density 1390 km/m^3 flows steadily through a pipe of varying diameter and height. At Location 1 along the pipe, the flow speed is 9.31 m/s and the pipe d1 diameter is 10.3cm . At Location 2, the pipe diameter d2 is 17.5 cm . At Location 1, the pipe is triangle y= 9.31m higher than it is at Location 2. Ignoring viscosity, calculate the difference between the fluid pressure at Location 2 and the fluid pressure...
S.3 a) A thin metal wire of 2x10-2 cm is placed along the axis of a...
S.3 a) A thin metal wire of 2x10-2 cm is placed along the axis of a thin cylindrical copper pipe with a diameter of 1.2 cm. Pipes and wires carry uniform but opposite loads of uniform size, measuring 2x10-8C / m, as well as λ = 2x10-8 C / m. Find the size of the electric field in the area between the pipe and the wire and the size of the electric field between the surface of the wire and...
Kerosene enters a 5 cm diameter tube at 35C with a velocity of 3 m/s. The...
Kerosene enters a 5 cm diameter tube at 35C with a velocity of 3 m/s. The tube is wrapped with a resistance heating element so that when it is energized a uniform heat flux is imposed on the tube. At the exit of the tube, the temperature of the kerosene is to be 45C. A constraint is placed on the process, such that the local kerosene temperature cannot exceed 80C; this is likely to occur at the wall of the...
e volume flow rate is Q = 0.076m^3/s, the pressure of the pump is P =...
e volume flow rate is Q = 0.076m^3/s, the pressure of the pump is P = 113702N/m^2, the same with the pressure of the boiler Determine the size (diameter D?) of the pipe from the tank to the pump from the pump to the boiler. And find the Velocity? find the power delivered by the pump, the pump is sitting 0.914 m (3 feet) lower than the boiler and the tank, in between the boiler and the tank. Density ?...
1. Find the area under the standard normal curve (round to four decimal places) a. To...
1. Find the area under the standard normal curve (round to four decimal places) a. To the left of  z=1.65 b. To the right of z = 0.54 c. Between z = -2.05 and z = 1.05 2. Find the z-score that has an area of 0.23 to its right. 3. The average height of a certain group of children is 49 inches with a standard deviation of 3 inches. If the heights are normally distributed, find the probability that a...
1. An oven chimney is made of brick with a heat transmission coefficient 1.1 W/mK 10...
1. An oven chimney is made of brick with a heat transmission coefficient 1.1 W/mK 10 cm thick. Since the shaft exterior radiation beam coefficient is 0.8 and the flue gas temperature is 350°C, the external ambient temperature is 25°C and the outer ambient heat transport coefficient is 20 W/m2K; a) Calculate the shaft exterior temperature. b) In order to reduce the risk of burn injury that may occur in the body, the shaft is asked to be below 55°Cve...
ch 6 1: It is generally a good idea to gain an understanding of the "size"...
ch 6 1: It is generally a good idea to gain an understanding of the "size" of units. Consider the objects and calculate the kinetic energy of each one. A ladybug weighing 37.3 mg flies by your head at 3.83 km/h . ×10 J A 7.15 kg bowling ball slides (not rolls) down an alley at 17.5 km/h . J A car weighing 1260 kg moves at a speed of 49.5 km/h. 5: The graph shows the ?-directed force ??...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT