Question

A 3‐m wide prismatic rectangular channel (S=0.005m/m) collects stormwater runoff in Jackson, MS. During a storm...

A 3‐m wide prismatic rectangular channel (S=0.005m/m) collects stormwater runoff in Jackson, MS. During a storm event the flow discharge reaches 15‐m3/s and a depth of 3.6‐m. If the channel bottom is 1‐ft above the reference datum, determine the total energy head for the specified flow conditions.

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

if you have any doubt kindly ask in the comment section and please do the rating.

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n...
The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n is 0.003. Determine the normal depth when the slope is 0.008. Check whether the flow is sub or supercritical. If the normal depth is to be kept at 2 m, determine the slope.
A bridge is planned on a 6 m wide rectangular channel carrying a flow of 14...
A bridge is planned on a 6 m wide rectangular channel carrying a flow of 14 m3/s at a flow depth of 0.82 m. For reducing the length of the bridge, what is the minimum channel width such that the u/s water level is not influenced for this discharge? Group of answer choices A. None of them correct B. The width can be reduced by one-third C. The width can be reduced by half D. There will be no reduction...
During a flood flow, the depth of flow in a 10 m wide rectangular channel at...
During a flood flow, the depth of flow in a 10 m wide rectangular channel at 2 sections 200 m apart was found to be 3.0 m and 2.9 m. respectively. The drop in the water surface elevation was found to be 0.12 m. Estimate the flood discharge through the channel. Assume n = 0.025.
Water flows in a rectangular concrete channel that is 10 m wide and has a slope...
Water flows in a rectangular concrete channel that is 10 m wide and has a slope of 0.005. The depth of the uniform flow in the channel (y1) is 450 mm and the discharge per width of the water is 2.2 m2/s. The downstream channel is smooth, and a hydraulic jump is forced to form in the channel by installing a sill. Calculate: (i) the depth and velocity of the water downstream of the hydraulic jump; (ii) the difference in...
Find critical depth of a 2 m wide rectangular channel if the flow rate passing through...
Find critical depth of a 2 m wide rectangular channel if the flow rate passing through it is 3 m3/s.
The flow in a very wide rectangular channel tends to a freefall at which the depth...
The flow in a very wide rectangular channel tends to a freefall at which the depth is reduced to 0.67 times the normal depth. The channel conveys a specific discharge of 4 m3/s/m and has a bed slope of 10 cm/km. Estimate the distance upstream of the fall where the water depth is 0.9 times the normal depth. Take the Manning coefficient as 0.025 and use the step-by-step (direct step) method.
an water vertical sluis gate freely 56 m3/s into a rectangular channel 7 m wide ....
an water vertical sluis gate freely 56 m3/s into a rectangular channel 7 m wide . the gate whic is the same width as the channel is set at a height of 1.4m above the bed and the depth at the vena contracta is .85 m the energy loss in the converging flow at a sluis is quite small so take the head loss B as .05v2 / 2g the normal depth in the downstream hz=2.6m 1. calculate the depth...
A 5-m wide rectangular channel with two reaches, each with a different slope, conveys 40m3/s of...
A 5-m wide rectangular channel with two reaches, each with a different slope, conveys 40m3/s of water. The channel slope for the first reach is 0.0005 and then a sudden change to a slope of 0.015 so that critical flow occurs at the transition. Determine the depths of flow at locations 10 m, 20 m and 30 m upstream of the critical depth. The Manning’s n for the channel is 0.015.
A rectangular channel has a width of 9.8 m and a flow discharge of 48 m3/dt....
A rectangular channel has a width of 9.8 m and a flow discharge of 48 m3/dt. Slope of the channel bottom is 0.0018 and manning coefficient is 0.037. Calculate normal water depth and critical water depth
A rectangular channel 6.20 m wide and 1.20 m deep is laid on a uniform slope...
A rectangular channel 6.20 m wide and 1.20 m deep is laid on a uniform slope of 0.003. The roughness coefficient of the channel is 0.013 m. a. Determine the discharge in the channel in m3/sec. b. Determine the savings in the lining per meter length of channel if the most efficient rectangular section is to be used for the same flow and properties. c. Determine the savings in earth excavation per meter length of channel if the most efficient...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT