Question

A solenoid having an inductance of 4.80 μH is connected in series with a 1.41 kΩ...

A solenoid having an inductance of 4.80 μH is connected in series with a 1.41 kΩ resistor. (a) If a 12.0 V battery is connected across the pair, how long will it take in seconds for the current through the resistor to reach 74.0% of its final value? (b) What is the current through the resistor at a time t = 1.00τL?

Homework Answers

Answer #1

The answer for above problem is explained below.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A solenoid having an inductance of 4.77 μH is connected in series with a 1.15 kΩ...
A solenoid having an inductance of 4.77 μH is connected in series with a 1.15 kΩ resistor. (a) If a 12.0 V battery is connected across the pair, how long will it take in seconds for the current through the resistor to reach 77.3% of its final value? (b) What is the current through the resistor at a time t = 1.00τL?
A solenoid having an inductance of 4.74 μH is connected in series with a 0.998 kΩ...
A solenoid having an inductance of 4.74 μH is connected in series with a 0.998 kΩ resistor. (a) If a 14.0 V battery is connected across the pair, how long will it take in seconds for the current through the resistor to reach 86.3% of its final value? (b) What is the current through the resistor at a time t = 1.00τL?
An ideal solenoid with 875 turns is 0.250 m long and has a cross-sectional area of...
An ideal solenoid with 875 turns is 0.250 m long and has a cross-sectional area of 3.00 ✕ 10−3 m2. (a) What is the inductance of this solenoid? H (b) If we connect this solenoid in series with a 12.0-V battery and a 195-Ω resistor, what is the maximum value of the current? A (c) Assuming the current is zero when t = 0 as the circuit elements are connected, at what time will the current reach 50% of its...
A solenoid with inductance L = 2.0 H is connected in series with a resistor R...
A solenoid with inductance L = 2.0 H is connected in series with a resistor R = 10 ohms, as well as an AC power supply that is providing current I(t) = I0 * cos( 2π * f * t ). The current has an amplitude of 2 A and a frequency of 60 Hz. a) Draw a diagram of the circuit. b) At time t = 0 seconds, what is the change in voltage across both the inductor and...
An uncharged 3.0-μF capacitor is connected in series with a 30-kΩ resistor, an ideal 6.7-V battery,...
An uncharged 3.0-μF capacitor is connected in series with a 30-kΩ resistor, an ideal 6.7-V battery, and an open switch. What is the voltage across the capacitor 21 ms after closing the switch? 15.2 V 6.70 V 12.0 V 1.39 V
A V = 84-V source is connected in series with an R = 1.1-kΩ resistor and...
A V = 84-V source is connected in series with an R = 1.1-kΩ resistor and an L = 34-H inductor and the current is allowed to reach maximum. At time t = 0 a switch is thrown that disconnects the voltage source, but leaves the resistor and the inductor connected in their own circuit. a) How much time, in milliseconds, is needed for the current in the circuit to drop to 9 % of its value at t =...
1A) A circuit consists of a 12.0 V battery, a 100 kΩ resistor, a 20.0 μF...
1A) A circuit consists of a 12.0 V battery, a 100 kΩ resistor, a 20.0 μF capacitor in series with a switch which is initially in the open position. The capacitor is initially uncharged. Calculate the charge on the capacitor 6.00 seconds after the switch is closed. Calculate the current through the resistor 6.00 seconds after the switch is closed. 1B) A 20 μF capacitor has previously charged up to contain a total charge of Q=100 μC on it. The...
A 48 μF capacitor is connected in series with a 32 kΩ resistor and a 6.0...
A 48 μF capacitor is connected in series with a 32 kΩ resistor and a 6.0 V DC source. (a) If the capacitor is initially uncharged, how long will it take the capacitor to charge to within 0.50% of maximum? (b) If the capacitor is replaced with an 96-mH inductor and the inductor has no current flowing through it initially, how long will it take the current through the inductor to be within 0.50% of maximum?
A 600 Ω resistor is joined in series with a 800m H inductance and a 6...
A 600 Ω resistor is joined in series with a 800m H inductance and a 6 Volts battery. A) What is the time constant of the circuit? B) How long will it take after the circuit is completed for the voltage across the resistor to reach 1.50 Volts? C) How long will it take after the circuit is completed for the voltage across the resistor to reach 99 percent of 6 Volts? Please show all your work!
A 48-?F capacitor is connected in series with a 32-kΩ resistor and a 6.0-V DC source....
A 48-?F capacitor is connected in series with a 32-kΩ resistor and a 6.0-V DC source. (a) If the capacitor is initially uncharged, how long will it take the capacitor to charge to within 0.50% of maximum? (b) If the capacitor is replaced with an 96-mH inductor and the inductor has no current flowing through it initially, how long will it take the current through the inductor to be within 0.50% of maximum?
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT