Question

Gaseous ammonia (NH3) at 10°C is fed at a rate of 9 kg/min to a blending...

Gaseous ammonia (NH3) at 10°C is fed at a rate of 9 kg/min to a blending unit where it is mixed with hot air. The resulting air-NH3 mixture has an O2:NH3 molar ratio of 2:1 and is at 600°C. The blending unit is not well insulated, and loses heat to the environment at a rate of 500 kJ/min. Calculate the temperature of the hot air entering the blending unit.Gaseous ammonia (NH3) at 10°C is fed at a rate of 9 kg/min to a blending unit where it is mixed with hot air. The resulting air-NH3 mixture has an O2:NH3 molar ratio of 2:1 and is at 600°C. The blending unit is not well insulated, and loses heat to the environment at a rate of 500 kJ/min. Calculate the temperature of the hot air entering the blending unit.

Homework Answers

Answer #1

I hope you can understand the solution.

Thank You!!!

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Gaseous ammonia (NH3) at 10°C is fed at a rate of 9 kg/min to a blending...
Gaseous ammonia (NH3) at 10°C is fed at a rate of 9 kg/min to a blending unit where it is mixed with hot air. The resulting air-NH3 mixture has an O2:NH3 molar ratio of 2:1 and is at 600°C. The blending unit is not well insulated, and loses heat to the environment at a rate of 500 kJ/min. Calculate the temperature of the hot air entering the blending unit.
In the manufacture of nitric acid, ammonia and preheated air are mixed to form a gas...
In the manufacture of nitric acid, ammonia and preheated air are mixed to form a gas containing 10 mole% NH3 at 600oC. (The ammonia is not preheated, since if it were, it will decompose to N2 and H2). The mixture is then catalytically oxidized to form NO2, which is absorbed in water to form HNO3. If ammonia enters the gas blending (mixing) unit at 25oC at a rate of 520 kg/h, and heat is lost from the mixer to its...
4NH3 + 5O2 --> 4NO + 6H2O 1. Nitric acid is made by first reacting ammonia...
4NH3 + 5O2 --> 4NO + 6H2O 1. Nitric acid is made by first reacting ammonia and oxygen to form nitric oxide: NH3 (g)+O2 (g)⟶NO(g)+H2O(g) Calculate the heat of reaction at a) standard conditions (this is what the book calls ∆ ) and b) at 500 °C. (This is what the book calls ∆ ) 2. (Builds off of problem 1). Ammonia gas enters a reactor with 30% more dry air (no water vapor) than is required for complete conversion....
1) 20 kg/min water at 20º C is mixed adiabatically with 40 kg/min water at 80...
1) 20 kg/min water at 20º C is mixed adiabatically with 40 kg/min water at 80 ºC. What is the outlet water temperature? Select one: a. 80 °C b. 60 °C c. 50 °C d. 70 °C 2) Steam at 0.8 MPa and 500 ºC is throttled over a well insulated valve to 0.6 MPa, what is the outlet temperature Select one: a. 450 ºC b. 500 ºC c. DOF>0 d. 400 ºC 3) Humid air at 70 C and...
1. On a mass basis a mixed gas stream consists of 3% nitric oxide, 4% sulfur...
1. On a mass basis a mixed gas stream consists of 3% nitric oxide, 4% sulfur dioxide, 39% carbon dioxide, and the balance nitrogen. Determine the molar composition and the ideal gas heat capacity of this mixed stream. 2. The mixed gas stream of problem 1 is fed to a waste heat boiler. In the boiler, heat is transferred from this gas stream to a water stream, which is fed to the boiler at a saturated liquid at 25 °C....
a. At pressure p=10 MPa, the Enthalpy (with reference to the tables A4/A5/A6/A7) for a closed...
a. At pressure p=10 MPa, the Enthalpy (with reference to the tables A4/A5/A6/A7) for a closed system containing water is equal to 3000 kJ/kg.. What is the phase of the system?   ……………………………………….(1 point) b. What is the Entropy for super heater vapor at p=10 MPa, and T=480℃? ………………………. (1 point) c. Given below is missing data for air modeled as an ideal gas. Assuming constant Cp and Cv with temperature, fill out the table (3 points). k=1.4 Δs (kJ/(kg.K)) T_1...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of fluid. At the inlet to a certain nozzle the enthalpy of the fluid is 3025 kJ/kg and the velocity is 60 m/s. At the exit from the nozzle the enthalpy is 2790 kJ/kg. The nozzle is horizontal and there is negligible heat loss from it. (i) Find the velocity at the nozzle exit. (ii) If the inlet area is 0.1 m2 and specific volume...
4.1A membrane made of 0.1 mm thick soft rubber separates pure O2 at 1 atm and...
4.1A membrane made of 0.1 mm thick soft rubber separates pure O2 at 1 atm and 25oC from air at 1.2 atm pressure. Determine the mass flow rate of O2 through the membrane per unit area and the direction of flow. Molar flow rate of oxygen is given by: ???? = ???????? / ??? (????1 ? ????2 ) where S is solubility of oxygen in rubber. The mass diffusivity of oxygen in rubber at 298 K is DAB = 2.1...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT