Question

Reasons of low effluent Total nitrogen and Total inprganic nitrogen in watewater treatment

Reasons of low effluent Total nitrogen and Total inprganic nitrogen in watewater treatment
Engineering   Chemical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A wastewater treatment plant discharges total phosphorus in its effluent throughout the year into a nearby...
A wastewater treatment plant discharges total phosphorus in its effluent throughout the year into a nearby river. The treatment plant produces flows of 6 MGD with a total phosphorus concentration of 4.0 mg/L. The receiving river has an upstream flow of 200 ft3/sec and a background concentration of total phosphorus of 0.3 mg/L. Determine the concentration (in mg/L) of total phosphorus in the river at a point downstream of the effluent location.
Effluent from a wastewater-treatment plant is discharged to a surface stream. The characteristics of the effluent...
Effluent from a wastewater-treatment plant is discharged to a surface stream. The characteristics of the effluent and the stream are given in the table below. Determine the stream characteristics after mixing has occurred. Parameter Effluent Stream Flow, 8500 m3/day 1.5 m3/sec BOD5, mg/L 25.0 2.0 Ammonia, mg/L 10.0 0.0 Nitrate, mg/L 7.0 3.0 Chloride, mg/l 15 5.0
Tell me about the cement which can be used in effluent treatment plants & describe it.
Tell me about the cement which can be used in effluent treatment plants & describe it.
Tell me about the cement which can be used in effluent treatment plants & describe it.
Tell me about the cement which can be used in effluent treatment plants & describe it.
A starch wastewater contains 100 mg/L COD and after treatment by an electrochemicalreactor, the effluent COD...
A starch wastewater contains 100 mg/L COD and after treatment by an electrochemicalreactor, the effluent COD is reduced to 1 mg/L. Knowing that the treatment time is 30 min, thevolume of the reactor is 50 L, and the DC current is 20 A. Calculate the instantaneous currentefficiency (ICE)
A wastewater treatment plant disposes of its effluent in a surface stream. Characteristics of the stream...
A wastewater treatment plant disposes of its effluent in a surface stream. Characteristics of the stream and effluent are given in the table below. What will be the dissolved oxygen concentration in the stream after 2.0 days? (10 Points) What will be the lowest dissolved oxygen concentration as a result of the waste discharge? (10 Points) Parameter Wastewater Stream Flow, m3/s 0.2 5.0 Dissolved Oxygen, mg/L 1.0 8.0 Temperature, o C 15.0 20.2 BOD5 at 20oC, mg/L 100 2.0 k1...
A treatment plant that sends effluent into the river claims the mean suspended solids is never...
A treatment plant that sends effluent into the river claims the mean suspended solids is never above 40 mg/l. Measurements of the suspended solids in river water on n = 14 Monday mornings yield x (x bar) = 46 and s = 9.4 mg/l. Based on data collected over a period of many years, it is reasonable to assume that the individual measurements follow a normal distribution. Do the data support or refute the treatment plant’s claim? Could you explain...
COD (organic) concentration: 9 mg/L Effluent concentration required: 0.9 mg/L Ozone treatment, r= 0.048/hr a) What...
COD (organic) concentration: 9 mg/L Effluent concentration required: 0.9 mg/L Ozone treatment, r= 0.048/hr a) What is the time required in the tank? b) if Q= 1000 L/day, how large should the tank be?
A BOD test was conducted on the unchlorinated effluent of a municipal wastewater treatment plant at...
A BOD test was conducted on the unchlorinated effluent of a municipal wastewater treatment plant at 20°C. The wastewater portion added to a 300-mL BOD bottle was 30 mL, and the dissolved oxygen (DO) values listed below were measured using a dissolved-oxygen probe. No seed was added to the bottles. What is the BOD value for each “valid” sample? Valid samples are ones that do not violate the following two rules: 1. DOf is less than 1.0 mg/L (unclear if...
At a wastewater-treatment plant FeCl3(s) is added to remove excess phosphate from the effluent. Assume that...
At a wastewater-treatment plant FeCl3(s) is added to remove excess phosphate from the effluent. Assume that the reactions that occur are: FeCl3(s) <> Fe3+ + 3Cl- FePO4 <> Fe3+ + PO43- The equilibrium constant for the second reaction is 10-26.4. What concentration of Fe3+ would be needed to maintain the phosphate concentration below the limit of 1 mg/L of P? (Hint: Assume all the P is in the PO43- form so we’re asking for 1 mg/L PO4 3- as P.)...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT