Question

The density of water at 0°C is very nearly 1000 kg/m3 (it is actually 999.84 kg/m3),...

The density of water at 0°C is very nearly 1000 kg/m3 (it is actually 999.84 kg/m3), whereas the density of ice at 0°C is 917 kg/m3. The bulk modulus of ice is 2.20 × 109 Pa.    Calculate the pressure, in pascals, necessary to keep freezing water from expanding, neglecting the effect such a large pressure would have on the freezing point. (This problem gives you only an indication of how large the forces associated with freezing water might be.)  

Homework Answers

Answer #1

doesn't need to consider sign here pressure indicates ,the pressure need to keep ice from expanding

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The density of ice is 917 kg/m3, and the density of sea water is 1025 kg/m3....
The density of ice is 917 kg/m3, and the density of sea water is 1025 kg/m3. A swimming polar bear climbs onto a piece of floating ice that has a volume of 4.32 m3. What is the weight of the heaviest bear that the ice can support without sinking completely beneath the water?
The density of ice is 917 kg/m3, and the density of sea water is 1025 kg/m3....
The density of ice is 917 kg/m3, and the density of sea water is 1025 kg/m3. A swimming polar bear climbs onto a piece of floating ice that has a volume of 6.83 m3. What is the weight of the heaviest bear that the ice can support without sinking completely beneath the water?
The density of ice is 917 kg/m3, and the density of sea water is 1025 kg/m3....
The density of ice is 917 kg/m3, and the density of sea water is 1025 kg/m3. A swimming polar bear climbs onto a piece of floating ice that has a volume of 4.20 m3. What is the weight of the heaviest bear that the ice can support without sinking completely beneath the water?
Due to its slight compressibility, the density of water varies with depth, although its bulk modulus...
Due to its slight compressibility, the density of water varies with depth, although its bulk modulus EV¯ = 2.20 GPa (absolute) can be considered constant. Part A Accounting for this compressibility, determine the gage pressure in the water at a depth of 1900 m , if the density at the surface of the water is ρ0 = 1000 kg/m3. P compressible= Part B Assuming water to be incompressible, determine the gage pressure in the water at a depth of 1900...
1. A crane lifts a steel submarine with a density of 8,050 kg/m3 and a mass...
1. A crane lifts a steel submarine with a density of 8,050 kg/m3 and a mass of 25,000 kg. It is moved as a constant speed (which means the net force equals??). What is the tension in the lifting cable? The density of the water is 1030 kg/m3. 2. An Airbus A490 aircraft (which may not actually exist) is a massive plane. It has a mass of 600,000 kg and a wing area of 875 m2. The density of air...
1. The density of water is 1000 kg/m3. Compared to this, the density of air at...
1. The density of water is 1000 kg/m3. Compared to this, the density of air at sea level is approximately 1000 times less. approximately 100 times less. approximately 10 times less. about the same. 2. What is the gauge pressure at the bottom of a 5 feet deep swimming pool? (Answer in Pa) 3.You are given the task to determine the volume of an irregular shaped object. You hang it on a scale and measure its weight to be 34...
A steel pipeline conveys water (density 1000 kg/m3 , bulk modulus 2.05x109 N/m2 ) from an...
A steel pipeline conveys water (density 1000 kg/m3 , bulk modulus 2.05x109 N/m2 ) from an upper to a lower reservoir the pipeline material is steel with Young’s modulus 210x109 N/m2 . It is 611 m long, has an internal diameter 1.1m, wall thickness 25 mm and surface roughness 0.68 mm. The flow is controlled by a valve located at the entrance to the lower reservoir, 211 m below the surface level in the upper reservoir. (a) Under steady flow...
If the experiment has been done correctly, you will have discovered that the density of water...
If the experiment has been done correctly, you will have discovered that the density of water has a maximum value at a temperature of 4 °C. The density of water is often quoted as being 1.000 g cm-3 (or 1000 kg m-3) at this temperature. The density of ice at 0 °C is approximately 0.917 g cm-3 (or 917 kg m-3). An iceberg will therefore float because it is less dense than the fluid it is immersed in. Consider an...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT