Question

An activated sludge process is being used to treat wastewater from a small town of 50,000...

An activated sludge process is being used to treat wastewater from a small town of 50,000 people, which includes intermittent industrial discharges that may have a toxic impact on the performance of the wastewater treatment plant(WWTP) a) What type of online equipment would you recommended be installed for early warnings of wastewater treatment failutre? b) Which parameters would you recommend be measured and where would these be positioned in the WWTP?

Homework Answers

Answer #1

The waste water collected from a small town of 50,000 people incluinding an intermediate industrial discharge will have an toxic impact on the performance of the Treatment plant.

The initial check for the same would be pH and BOD. Since the activated process is used to degrade the biological method present in the water in the form of flocs and suspended solids.

Online BOD euipment should be used at the discharge of the WWTP in order to check safe functioning of the system.

Presence of degradable matter in water will cause odour and colour to the water. This will also have impact on COD of the water.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
An activated sludge process is being used to treat wastewater from a small town of 50,000...
An activated sludge process is being used to treat wastewater from a small town of 50,000 people, which includes intermittent industrial discharges that may have a toxic impact on the performance of the wastewater treatment plant(WWTP) a) What type of online equipment would you recommended be installed for early warnings of wastewater treatment failutre? b) Which parameters would you recommend be measured and where would these be positioned in the WWTP?
A completely mixed activated sludge process is designed to treat 20,000 m3 /d of domestic wastewater...
A completely mixed activated sludge process is designed to treat 20,000 m3 /d of domestic wastewater having a BOD5 concentration of 250 mg/L following primary treatment. The NPDES permit requirement for effluent BOD5 and TSS is 20 mg/L for each. The biokinetic parameters have been established as: yield = 0.6 , k = 5/d, Ks = 60 mg/L, and kd = 0.06/d. The MLVSS concentration in the aeration tank is to be maintained at 3000 mg/L and the ratio of...
You have been retained to design a wastewater treatment plant using a conventional activated sludge process...
You have been retained to design a wastewater treatment plant using a conventional activated sludge process for a town of 40,000 people. The industrial flow contribution to the sewer system is 300,000 gallons per day. Effluent discharge standards require effluent BOD5 and total suspended solids concentration of <10 mg/l. Assume the following design criteria are applicable: Domestic sewage flow = 100 gal/cap/day (including I/I) BOD loading = 0.18 lbs/cap/day TSS loading = 0.20 lbs/cap/day BOD removal in primary = 33%...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT