Question

Adrian is trying to heat up a sphere (radius = 0.05 m) of unknown material in...

Adrian is trying to heat up a sphere (radius = 0.05 m) of unknown material in a furnace. She wants to know how long it will take for the object to heat up to 300°C when moved from room temperature (25°C) to a 600°C furnace. Use the following information to determine the time (in minutes) it will take for the sphere to reach 300°C after transfer to the furnace

Density of object = 7400 kg/m3

Specific heat capacity = 520 J/(kg*K)

Conductivity = 50 W/(m*K)

Heat Transfer Coefficient = 45 W/(m2*K)

Engineering   Chemical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Adrian is trying to heat up a sphere (radius = 0.05 m) of unknown material in...
Adrian is trying to heat up a sphere (radius = 0.05 m) of unknown material in a furnace. She wants to know how long it will take for the object to heat up to 300°C when moved from room temperature (25°C) to a 600°C furnace. Use the following information to determine the time (in minutes) it will take for the sphere to reach 300°C after transfer to the furnace. Make sure to show validation for any equations that you use....
2.1Consider a solid cylindrical rod of length 0.15 m and diameter 0.05 m. The top and...
2.1Consider a solid cylindrical rod of length 0.15 m and diameter 0.05 m. The top and bottom surfaces of the rod are maintained at constant temperatures of 20oC and 95oC, respectively, while the side surface is perfectly insulated. 2.1.1 Draw a diagram to represent the situation described above. (3) 2.1.2 Determine the rate of heat transfer through the rod if it is made of copper, k = 380 W/m? oC. (4) 2.1.3 Determine the rate of heat transfer through the...
The wall of an industrial furnace is constructed from unknown material with 0.5 m . Measurements...
The wall of an industrial furnace is constructed from unknown material with 0.5 m . Measurements made during steady state operation reveal temperature at the inner and outer surface, respectively. What is the rate of heat loss through a wall that is 2 m X 3.5 m on a side Abstract: Introduction: Results Material A Material B Material C ∆? K q ∆? K q ∆? K q    Each box has three rows And Graphic representation for x axis...
hot fluid at 230°C flows through a 1-meter pipe of 0.02m outside radius and 0.015m inside...
hot fluid at 230°C flows through a 1-meter pipe of 0.02m outside radius and 0.015m inside radius. The thermal conductivity of the pipe is 0.5 W/m.k, and the heat transfer coefficient (hi) inside is 300 W/m2 K. The pipe is located in a room at 30°C, and the heat transfer coefficient (ho) at the outer surface is 10 W/m2 k. Calculate the temperature drop (∆T) across the pipe wall.
Q. Unsteady conduction A large steel plate 0.02 m thick leaves a heat treating furnace at...
Q. Unsteady conduction A large steel plate 0.02 m thick leaves a heat treating furnace at 425 oC. And the plate is plunged into water (at 25 oC) and cooled from both sides. How long does it take for the maximum temperature to reach 65 oC? For steel plate: thermal conductivity, k=30 W/m·K, density ?=7600 kg/m3, heat capacity cp=700 J/kg·K. Heat transfer coefficients: h=6000 W/m2·K in water. Please use two methods to calculate this question: (1) Directly apply the exact...
Consider a cube of density, specific heat, and thermal conductivity of 2700 kg/m3, 0.896 kJ/kg-K, and...
Consider a cube of density, specific heat, and thermal conductivity of 2700 kg/m3, 0.896 kJ/kg-K, and 204 W/m-K, respectively. The cube is 5 cm in length, and is initially at a temperature of 20 oC. For t>0, two of the boundary surfaces are insulated, two are subjected to uniform heating at a rate of 10,000 W/m2, and two dissipate heat by convection to an ambient temperature of 20 oC, with a heat transfer coefficient of 50 W/m2-K. Assuming lumped capacitance...
A spherical object (50 cm diameter, c=0.46 kJ/kg*C, k = 42 W/m*C, density = 7800 kg/m3...
A spherical object (50 cm diameter, c=0.46 kJ/kg*C, k = 42 W/m*C, density = 7800 kg/m3 ) is initially at a uniform temperature of 450 C. It is suddenly placed in a constant temperature environment of 100 C. The convection transfer coefficient is 500 W/m2*C. How long would it take for temperature in the center of the sphere to cool down to 150 C? Note: Bi for a sphere is (hD)/(6k).Suggestion: First calculate Biot number, then determine if T is...
A Parabolic trough concentrator with width of 3 m and length of 25 m has an...
A Parabolic trough concentrator with width of 3 m and length of 25 m has an absorbed solar radiation per unit area of aperture of 600 W/m2. The receiver is a cylinder with an emittance of 0.3 and is surrounded by an evaluated glass cylindrical envelope. The absorber has a diameter of 50 mm and the transparent envelope has an outer diameter of 100 mm with a thickness of 5 mm. The collector is designed to heat a fluid entering...
The fluid in a heat exchanger in a process plant needs to be warmed up prior...
The fluid in a heat exchanger in a process plant needs to be warmed up prior to having process startup. The shell side of the heat exchanger contains the process fluid (water) while the tube side is supplied with steam at 150°C to facilitate the heating. Assume the exterior is well insulated such that heat losses are negligible. a) Derive the ODE and analytically solve for the function that describes the temperature of the fluid in the heat exchanger with...
a) A 12 mm diameter mild steel sphere (k = 42.5 W/m K) is exposed to...
a) A 12 mm diameter mild steel sphere (k = 42.5 W/m K) is exposed to cooling airflow at 27 0C resulting in the convective coefficient, h = 114 W/ m2 K. The relevant properties of mild steel are given as follows: Density , /7850 2 mkg  Specific heat K kgJc p / 475 and thermal diffusivity hr m /043.0 2  Determine: (i) Time required to cool the sphere (lumped parameter system) from 540 0C to 950C. [7...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT