Question

What length of 0.050-m outside-diameter vertical tube is required to condense 0.15 kg/s of saturated steam...

What length of 0.050-m outside-diameter vertical tube is required to condense 0.15 kg/s of saturated steam at 120°C if the tube wall temperature is 70°C?

Engineering   Chemical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

In case of any doubt or you need any further help regarding this solution please comment below.

Thank you. Please upvote it.

Please................

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Steam at its saturation temperature of 65°C is condensing on the outside of a tube with...
Steam at its saturation temperature of 65°C is condensing on the outside of a tube with outside diameter 2.5cm and length 3m. The tube is maintained at 35°C by flow of cooling water through it. Calculate the average heat transfer coefficient over the tube length and the rate of condensate flow at the bottom of the tube. Physical properties can be found in data tables. Find the heat transfer coefficients for the vertical and horizontal tubes using both the Nusselt...
A smooth tube 5 cm in diameter and 450 cm in length is placed inside another...
A smooth tube 5 cm in diameter and 450 cm in length is placed inside another tube larger in diameter. Air enters the smaller diameter tube at a pressure of 5 bars, a mean temperature of 16 oC , and at a flow rate of 29 gm/s. saturated steam at 1.523 bar in the annulus between the two tubes condenses on the surface 0f the inside tube find: The outlet temperature of air The outlet pressure of air The mass...
Kerosene enters a 5 cm diameter tube at 35C with a velocity of 3 m/s. The...
Kerosene enters a 5 cm diameter tube at 35C with a velocity of 3 m/s. The tube is wrapped with a resistance heating element so that when it is energized a uniform heat flux is imposed on the tube. At the exit of the tube, the temperature of the kerosene is to be 45C. A constraint is placed on the process, such that the local kerosene temperature cannot exceed 80C; this is likely to occur at the wall of the...
Saturated steam at 1 atm condenses on the outer surface of a vertical, 100-mm-diameter pipe 1...
Saturated steam at 1 atm condenses on the outer surface of a vertical, 100-mm-diameter pipe 1 m long, having a uniform surface temperature of 94 o C. Estimate the heat transfer rate to the pipe and the total condensation rate.
Refrigerant 134a enters a tube at a rate of 0.07 kg/s as saturated liquid at 70...
Refrigerant 134a enters a tube at a rate of 0.07 kg/s as saturated liquid at 70 C and leaves the tube as saturated liquid as well at -8 C. It loses 10 kW of heat to the surroundings in the process. If the surroundings are at a temperature 10 C, find the total entropy generation in this process. Assume steady conditions
Soru 5) An uninsulated steam pipe with an outside diameter of 57 mm passes through a...
Soru 5) An uninsulated steam pipe with an outside diameter of 57 mm passes through a room in the basement. If the pressure of the saturated steam is 200 kPa and the room temperature is 15 oC, compare the results by calculating the amount of heat transfer from 1 m of the pipe to the room separately using natural convection and condensation heat transfer routes. Take the pipe surface temperature 120 oC.
A condenser is made up of a horizontal tube bank (0.75 m long, 200 mm diameter)....
A condenser is made up of a horizontal tube bank (0.75 m long, 200 mm diameter). Saturated steam at 143.3 kPa condenses on the outside surface of the tubes. The surface temperature is maintained at 90°C. Evaluate the condensation rate and heat transfer coefficient if the bank consists of 15 tubes.
CHEMICAL ENGINEERING Two bulbs are connected by a straight tube, 0.001 m in diameter and 0.15...
CHEMICAL ENGINEERING Two bulbs are connected by a straight tube, 0.001 m in diameter and 0.15 m in length. Initially the bulb at end 1 contains N2 and the bulb at end 2 contains H2. The pressure and temperature are maintained constant at 25°C and 1 atm. At a certain time after allowing diffusion to occur between the two bulbs, the nitrogen content of the gas at end 1 of the tube is 80 mol% and at end 2 is...
A vertical spring has a length of 0.15 m when a 0.225 kg mass hangs from...
A vertical spring has a length of 0.15 m when a 0.225 kg mass hangs from it, and a length of 0.725 m when a 1.875 kg mass hangs from it. a. What is the force constant of the spring, in newtons per meter? b. What is the unloaded length of the spring, in centimeters?
Mercury at an inlet temperature of 75 °C flows through a 2 cm inside diameter tube...
Mercury at an inlet temperature of 75 °C flows through a 2 cm inside diameter tube at a flow rate of 1.5 kg/s. This tube is part of a nuclear reactor in which heat can be generated uniformly at any desired rate by adjusting the neutron flux level. Determine convection heat transfer coefficient, and the heat flux required for a 1.5 m length of tube required to raise the temperature of the mercury to 275 °C. Also determine if mercury...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT