Question

A condenser is made up of a horizontal tube bank (0.75 m long, 200 mm diameter)....

A condenser is made up of a horizontal tube bank (0.75 m long, 200 mm diameter). Saturated steam at 143.3 kPa condenses on the outside surface of the tubes. The surface temperature is maintained at 90°C. Evaluate the condensation rate and heat transfer coefficient if the bank consists of 15 tubes.

Engineering   Chemical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

Hope this will be helpful

The final answer may differ depending on different Correlation used for heat transfer coefficient.

The correlation used is from Standard correlation table.

Page 1

Page 2

Please Give your feedback

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
There is a condenser that is made up of a horizontal tube bank (0.25 m long,...
There is a condenser that is made up of a horizontal tube bank (0.25 m long, 125 mm diameter). Saturated steam at 143.3 kPa is being condensed on the outside surface of the tubes, and the surface temperature is maintained at 90°C. Find the condensation rate and heat transfer coefficient if the bank consists of 15 tubes.
The condenser of a large steam power plant is a heat exchanger in which steam is...
The condenser of a large steam power plant is a heat exchanger in which steam is condensed to liquid water. Assume the condenser to be a parallel flow shell-and-tube heat exchanger consisting of a single shell and 10,000 tubes, each executing two passes. The tubes are of thin wall construction with D = 30 mm and the steam condenses on their outer surface. The heat transfer rate that must be effected by the exchanger is Q = 2 × 10^9...
Soru 5) An uninsulated steam pipe with an outside diameter of 57 mm passes through a...
Soru 5) An uninsulated steam pipe with an outside diameter of 57 mm passes through a room in the basement. If the pressure of the saturated steam is 200 kPa and the room temperature is 15 oC, compare the results by calculating the amount of heat transfer from 1 m of the pipe to the room separately using natural convection and condensation heat transfer routes. Take the pipe surface temperature 120 oC.
An air-cooled steam condenser is operated with air in cross flow over a square, in-line array...
An air-cooled steam condenser is operated with air in cross flow over a square, in-line array of 400 tubes (NL=NT= 20), with an outside tube diameter of 20 mm and longitudinal and transverse pitches of SL= 60 mm and ST= 42 mm, respectively. Saturated steam at a pressure of 2.455 bars enters the tubes, and a uniform tube outer surface temperature of Ts= 390 K may be assumed to be maintained as condensation occurs within the tubes. (a) If the...
Saturated steam at 1 atm condenses on the outer surface of a vertical, 100-mm-diameter pipe 1...
Saturated steam at 1 atm condenses on the outer surface of a vertical, 100-mm-diameter pipe 1 m long, having a uniform surface temperature of 94 o C. Estimate the heat transfer rate to the pipe and the total condensation rate.
Steam at its saturation temperature of 65°C is condensing on the outside of a tube with...
Steam at its saturation temperature of 65°C is condensing on the outside of a tube with outside diameter 2.5cm and length 3m. The tube is maintained at 35°C by flow of cooling water through it. Calculate the average heat transfer coefficient over the tube length and the rate of condensate flow at the bottom of the tube. Physical properties can be found in data tables. Find the heat transfer coefficients for the vertical and horizontal tubes using both the Nusselt...
A 10-mm diameter tube has a maintained surface temperature of 200°C. Engine oil enters the tube...
A 10-mm diameter tube has a maintained surface temperature of 200°C. Engine oil enters the tube at 70°C at a flow rate of 0.5 kg/s and exits at 105°C. Find the length, in m, of the tube and well as the corresponding heat transfer rate, in W. Assume fully developed flow and use the Dittus–Boelter equation to calculate the average Nusselt number. q = .    L =
Used engine oil flows at 0.025 m/s through a 12.5-mm-diameter tube. The oil enters the tube...
Used engine oil flows at 0.025 m/s through a 12.5-mm-diameter tube. The oil enters the tube at a temperature of 27 ºC, while the tube surface temperature is maintained at 87º C. Determine the oil outlet temperature for a 100-m and the total heat transfer.
Saturated steam at 60 ºC is condensed over an array of 100 horizontal tubes, each with...
Saturated steam at 60 ºC is condensed over an array of 100 horizontal tubes, each with a diameter of 1.2 cm and a length of 3 m. The tube surfaces are maintained at a uniform temperature of 30 ºC. a) What is the pressure of the steam? _____________ kPa. (Note that this could have been given instead of steam T.) Determine the condensation rates on the tubes for b) a rectangular array of 5 tubes high by 20 tubes wide...
. [Problem 11-5, p.689 in Bergman, et al.] The condenser of a steam power plant contains...
. [Problem 11-5, p.689 in Bergman, et al.] The condenser of a steam power plant contains N = 1000 brass tubes (k = 110 W/m-K), each of inner and outer diameters, D1 = 25 mm and D2 = 28 mm respectively. Steam condensation on the outer surfaces of the tubes is characterized by a convection coefficient of ho = 10,000 W/m2-K. (a) If cooling water from a large lake is pumped through the condenser tubes at ṁw = 400 g/s,...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT