Question

Saturated steam at 1 atm condenses on the outer surface of a vertical, 100-mm-diameter pipe 1...

Saturated steam at 1 atm condenses on the outer surface of a vertical, 100-mm-diameter pipe 1 m long, having a uniform surface temperature of 94 o C. Estimate the heat transfer rate to the pipe and the total condensation rate.

Engineering   Chemical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Soru 5) An uninsulated steam pipe with an outside diameter of 57 mm passes through a...
Soru 5) An uninsulated steam pipe with an outside diameter of 57 mm passes through a room in the basement. If the pressure of the saturated steam is 200 kPa and the room temperature is 15 oC, compare the results by calculating the amount of heat transfer from 1 m of the pipe to the room separately using natural convection and condensation heat transfer routes. Take the pipe surface temperature 120 oC.
A condenser is made up of a horizontal tube bank (0.75 m long, 200 mm diameter)....
A condenser is made up of a horizontal tube bank (0.75 m long, 200 mm diameter). Saturated steam at 143.3 kPa condenses on the outside surface of the tubes. The surface temperature is maintained at 90°C. Evaluate the condensation rate and heat transfer coefficient if the bank consists of 15 tubes.
A pipe is transporting saturated steam at 1 bar (100°C) . The pipe has an inside...
A pipe is transporting saturated steam at 1 bar (100°C) . The pipe has an inside diameter of 100 mm with a 9 mm thick wall. The pipe is mild steel with a thermal conductivity of 80 W m-1 K-1. Covering the pipe is a 20 mm thick layer of polythene insulation with a thermal conductivity of 0.04 W m-1 K-1. The convective heat transfer coefficient of the steam is 513.4 W m-2 K-1. The convective heat transfer coefficient of...
Steam enters a horizontal 14-cm-diameter pipe as a saturated vapor at 5 bar with a velocity...
Steam enters a horizontal 14-cm-diameter pipe as a saturated vapor at 5 bar with a velocity of 10 m/s and exits at 4.5 bar with a quality of 95%. Heat transfer from the pipe to the surroundings at 291K takes place at an average outer surface temperature of 400 K. For operation at steady state, determine (a) the velocity at the exit, in m/s. (b) the rate of heat transfer from the pipe, in kW.? (c) the rate of entropy...
Steam enters a horizontal 14-cm-diameter pipe as a saturated vapor at 5 bar with a velocity...
Steam enters a horizontal 14-cm-diameter pipe as a saturated vapor at 5 bar with a velocity of 10 m/s and exits at 4.5 bar with a quality of 95%. Heat transfer from the pipe to the surroundings at 291K takes place at an average outer surface temperature of 400 K. For operation at steady state, determine (a) the velocity at the exit, in m/s. (b) the rate of heat transfer from the pipe, in kW.? (c) the rate of entropy...
A horizontal pipe with an outer surface temperature of 80 * C and an outside diameter...
A horizontal pipe with an outer surface temperature of 80 * C and an outside diameter of 100 mm is located in a room at atmospheric pressure at 20 ° C. Find the required pipe length for the loss of heat from the pipe to 1 kW. (Physical properties for air k = 0.0287 W / mK, Pr = 0.70, v = 19x10-6 m² / s)
A long 8-cm-diameter steam pipe whose external surface temperature is 90°C passes through some open area...
A long 8-cm-diameter steam pipe whose external surface temperature is 90°C passes through some open area that is not protected against the winds. Determine the rate of heat loss from the pipe per unit of its length when the air is at 1 atm pressure and 7°C and the wind is blowing across the pipe at a velocity of 47 km/h. The properties of air at 1 atm and the film temperature of (Ts + T∞)/2 = (90 + 7)/2...
The condenser of a large steam power plant is a heat exchanger in which steam is...
The condenser of a large steam power plant is a heat exchanger in which steam is condensed to liquid water. Assume the condenser to be a parallel flow shell-and-tube heat exchanger consisting of a single shell and 10,000 tubes, each executing two passes. The tubes are of thin wall construction with D = 30 mm and the steam condenses on their outer surface. The heat transfer rate that must be effected by the exchanger is Q = 2 × 10^9...
Inside surface of a 0.05 m diameter pipe is maintained at 100°C thanks to the condensing...
Inside surface of a 0.05 m diameter pipe is maintained at 100°C thanks to the condensing vapor on the outer surface of the pipe. Water mass flow rate through the pipe is ?̇ = 0.01kg/s and it enters the pipe at a temperature of Ti=20°C. How long should the pipe be to increase the temperature of water to To=80°C?
Insulation of steam pipes is an important aspect in industries to resist the heat loss from...
Insulation of steam pipes is an important aspect in industries to resist the heat loss from the steam pipe to the surrounding. In a typical steam pipe in an industry is made of steel( k=58w/mk) has inner diameter of 160mm and outside diameter of 170 mm. The saturated steam from a boiler flowing through the steam pipe is at 300C while the ambient air is at 50 C. The steel pipe has two layers of insulation the inner layer(k=0.17w/mc) is...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT