Question
I need to perform a separation/purification scheme with a mixture of 10% glycine, 40% benzophenone, and...
I need to perform a separation/purification scheme with a mixture of 10% glycine, 40% benzophenone, and 50% phthalic acid. No specific solvents are given. Please help!
Homework Answers
Answer #1
You have various ways to carry out the purification and separation.
You can go for chromatographic techniques by dissolving all the components in ethanol. This is one of the most ideal solvents available. It has both polar OH group and the hydrophobic hydrocarbon side chain. This is why it dissolves most of the available polar and non-polar organic substances.
You can also see the TLC for the mixture and compare with the original Rf values of the three components.
We know that all three components are white solids. You can add diethyl ether to the mixture. Benzophenone and phthalic acid will dissolve in it and glycine will not.
You can go for hypenated techniques of chromatography combined with spectroscopy for both purification, separation and identification.
(ticks are for soluble and cross for insoluble)
Hope the choice of solvent will help you.
Have a good day!
Not the answer you're looking for?
Similar Questions
I need to come up with a a separation and purification scheme procedure for 50% anthracene,...
I need to come up with a a separation and purification scheme
procedure for 50% anthracene, 40% 4-aminoacetophenone, and
1,4-dichlorobenzene.
The substances given are 50% benzoic acid, 40% benzoin, and 10%1,4-dibromobenzene. I need a seperation scheme,...
The substances given are 50% benzoic acid, 40% benzoin, and
10%1,4-dibromobenzene. I need a seperation scheme, i know i have to
use extraction and recrytallization to seperate each. I am just
confused which substances to use, the solvents available are water,
1.0M NaOH, 6.0m NaOH, 1.0M HCl, 6.0M HCl, 1M NaHCO3, saturated aq
sodium chloride, dichloromethane, diethyl ether, 95% ethanol,
methanol, isopropyl alcohol, acetone, hexane, and toluene. thank
you for any help!
Given 1 g mixture of 50% fluorene, 40% o-toluic acid, 10% 1,4-dibromobenzene. I will have to...
Given 1 g mixture of 50% fluorene, 40% o-toluic acid, 10%
1,4-dibromobenzene. I will have to separate and purify two of the
three chemicals.
The following solutions will be available: water, 1.0 M NaOH,
6.0 M NaOH, 1.0 M HCl, 6.0 M HCl, 1M NaHCO3, saturated aqueous
sodium chloride, dichloromethane, diethyl ether, 95% ethanol,
methanol, isopropyl alcohol, acetone, hexane, and toluene
I need help with a separation scheme (flow chart) that visually
represents the procedure.
I'm trying to work on a separation scheme for 50% 1,2,4,5-tetrachlorobenzene, 40% o-toulic acid, and 10%...
I'm trying to work on a separation scheme for 50%
1,2,4,5-tetrachlorobenzene, 40% o-toulic acid, and 10%
1,4-dibromobenzene. I could really use your advice ASAP, thank you!
Using crystalllization and acid-base extraction, I need to sperate
and purify at least 2 of the 3 compounds listed. The following
reagents are available: 1M NaOH, 6M NaOH, 1M HCl, 6M HCl, 1M
NaHCO3, saturated sodium chloride, diethyl ether, 95% ethanol,
methanol, isopropyl alcohol, actone, hexane, toulene, methylene
choride, and granular anhydrous sodium sulfate.
I need to do an extraction experiment with a mixture of 50% phenanthrene, 40% methyl 4-aminobenzoate...
I need to do an extraction experiment with a mixture of 50%
phenanthrene, 40% methyl 4-aminobenzoate and 10%
1,4-dibromobenzene. What solvent should I use? I was thinking about
using diethyl ether. After extraction, I plan on doing
crystallization with the organic layer using hot ethanol.
Solvents available: diethyl ether, 95% ethanol, methanol,
isopropyl alcohol, acetone, hexane, toluene, methylene chloride,
and anhydrous sodium sulfate. Which one?
How do I set up a separation scheme for a solution with 50% methyl-4-aminobenzoate, 40% 1,2,4,5-tetrachlorobenzene,...
How do I set up a separation scheme for a solution with 50%
methyl-4-aminobenzoate, 40% 1,2,4,5-tetrachlorobenzene, and 10%
1,4-dibromobenzene? The available reagents are 1 M NaOH,
6M NaOH, 1 M HCl, 6 M HCl, 1 M
NaHCO3, saturated sodium chloride, diethyl ether, 95% ethanol,
methanol, isopropyl alcohol, acetone, hexane, toluene, methylene
chloride, and anhydrous sodium sulfate. I need to isolate 2 of the
three compounds through extraction
If I have a mixture of 50% 2-chlorobenzoic acid, 40% flourene, 10% 1,4-dibromobenzene and i'm trying...
If I have a mixture of
50% 2-chlorobenzoic acid, 40% flourene, 10%
1,4-dibromobenzene
and i'm trying to purify the 2-chloreobenzoic acid and flourene
seperately through recrystillization, which solvent should I use
for each?
I understand it is due to the sollubility of each but I am still
confused.
Sovlent options are 1M NaOH, 6M NaOH, 1M HCl, 6M HCl, 1M NaHCO3,
saturated NaCl, diethyl ether, 95% ethanol, methanol, isopropyl
alcohol, acetone, hexane, toluene, methylene chloride, and
anhydrous sodium sulfate.
Please...
Lithium (ppb) Signal (mV) 0 0 2 0.384 10 0.928 20 1.69 30 2.419 40 7.973...
Lithium
(ppb)
Signal (mV)
0
0
2
0.384
10
0.928
20
1.69
30
2.419
40
7.973
50
4.267
60
5.003
75
6.039
100
7.886
125
8.357
150
8.811
A researcher is testing the concentration of Lithium in lake
water after four times the average signal is 4.463 mV. Determine
the concentration of lithium in the water and find the uncertainty
of the calculated concentration.
So for the concentration I just graphed it to find the Y=mx+b
and plug the signal...
Team 5 answer the questions What are 4 key things you learned about the topic from...
Team 5 answer the questions
What are 4 key things you learned about the topic from reading
their paper?
How does the topic relate to you and your current or past
job?
Critique the paper in terms of the organization and quality.
Incentive Systems
In
this paper, we will focus primarily on financial rewards that
companies use to attract, retain and motivate the brightest and
most talented candidates in the labor market. By providing a reward
system that...
Please show me how to apply CVP analysis for this case study. FLY ASH BRICK PROJECT:...
Please show me how to apply CVP analysis for this case
study.
FLY ASH BRICK PROJECT: FEASIBILITY STUDY USING CVP ANALYSIS
S. K. Mitra and Shubhra Hajela wrote this case solely to provide
material for class discussion. The authors do not intend to
illustrate either effective or ineffective handling of a managerial
situation. The authors may have disguised certain names and other
identifying information to protect confidentiality.
This publication may not be transmitted, photocopied, digitized
or otherwise reproduced in any...
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
ADVERTISEMENT
Active Questions
asked 6 minutes ago
asked 19 minutes ago
asked 21 minutes ago
asked 25 minutes ago
asked 30 minutes ago
asked 39 minutes ago
asked 45 minutes ago
asked 50 minutes ago
asked 51 minutes ago
asked 57 minutes ago
asked 1 hour ago
asked 1 hour ago