Question

A feed that is 40 mol% methane, 15 mol% n-butane, 10 mol% n-pentane, and 35 mol%...

A feed that is 40 mol% methane, 15 mol% n-butane, 10 mol% n-pentane, and 35 mol% n-hexane is flash distilled. The feed is fed to the flash drum at 150 kmol/h. The drum pressure is 250 kPa and the drum temperature is 10°C. Use the DePriester charts. Find V/F, xi, yi, V, L.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The feed stream to a distillation column is 40 mol-% n-pentane and 60 mol% n-hexane. Feed...
The feed stream to a distillation column is 40 mol-% n-pentane and 60 mol% n-hexane. Feed flow rate is 2500 mol/h and feed temperature is 30 °C. The column operates at 1 atm pressure and uses a total condenser. A distillate with 97 mol-% n-pentane is desired. Bottoms from the column should contain 98 mol-% n-hexane. Calculate both product flow rates
A saturated liquid feed at 1000.0 kmol/h that is 8.0 mol% ethane, 33.0 mol% propane, 49.0...
A saturated liquid feed at 1000.0 kmol/h that is 8.0 mol% ethane, 33.0 mol% propane, 49.0 mol% n-butane, and 10.0 mol% n-pentane is fed to a distillation column operating at 5.0 atm. The column has a total condenser and a partial reboiler. Recovery of propane in the distillate is 99.7%, and n-butane recovery in the bottoms is 99.8%. a) Find N min from the Fenske equation (hand calculation). b) Find (L/D) min from the Underwood equation (hand calculation). c) Use...
Consider a flash drum operating at 69oC that is fed a mixture of n-pentane, n-hexane and...
Consider a flash drum operating at 69oC that is fed a mixture of n-pentane, n-hexane and nheptane at compositions of 0.55, 0.25 and 0.20, respectively. The vapor pressures for these compounds are 2.755, 1.021, and 0.39 bar, respectively at this temperature. Determine the dew point pressure of this mixture and the liquid composition.
a mixture of 65 mol % n hexane and 35 mole % n octane is fed...
a mixture of 65 mol % n hexane and 35 mole % n octane is fed to a flash drum operating at 1500 mm Hg. Feed rate is 100 gmol/s. Mixture is heated to 110 degrees celcius, which the mixture vaporizes. Vapor and liquid products are removed constantly, A) Calculatae the vapor and liquid product compositions (Mol % n hexane and n octane) B) Calculate the vapor and liquid flow rates (gmol/s) y hex = 0.7 x hex = 0.6...
Consider a mixture of 30% n-butane, 35% n-hexane, 35% n-heptane. a. If the temperature is 40...
Consider a mixture of 30% n-butane, 35% n-hexane, 35% n-heptane. a. If the temperature is 40 ?C, calculate the bubble point pressure in kPa and the unknown mole fractions. Specify whether the unknown mole fractions are vapor or liquid. b. If the temperature is 50 ?C, what is the dew point pressure in kPa and what are the unknown mole fractions? Specify whether the unknown mole fractions are vapor or liquid.
A mixture of 35 mole% n-hexane (C6H14) and rest n-heptane (C7H16) is fed to a flash...
A mixture of 35 mole% n-hexane (C6H14) and rest n-heptane (C7H16) is fed to a flash drum operating at 1500 mmHg pressure. The feed rate is 100 mol/s. The mixture is heated to 100C, and the vapor and liquid are removed continuously. Assuming ideal conditions, calculate vapor and liquid flow rates and compositions.
A mixture of 35 mole% n-hexane (C6H14) and rest n-heptane (C7H16) is fed to a flash...
A mixture of 35 mole% n-hexane (C6H14) and rest n-heptane (C7H16) is fed to a flash drum operating at 1500 mmHg pressure. The feed rate is 100 mol/s. The mixture is heated to 100C, and the vapor and liquid are removed continuously. Assuming ideal conditions, calculate vapor and liquid flow rates and compositions.
Consider a mixture of 30% n-butane, 35% n-hexane, 35% n-heptane. If the pressure is 202 kPa,...
Consider a mixture of 30% n-butane, 35% n-hexane, 35% n-heptane. If the pressure is 202 kPa, calculate the dew point temperature in ?C and the unknown mole fractions. Specify whether the unknown mole fractions are vapor or liquid.
Consider a mixture of 30% n-butane, 35% n-hexane, 35% n-heptane. If the temperature is 50 ?C,...
Consider a mixture of 30% n-butane, 35% n-hexane, 35% n-heptane. If the temperature is 50 ?C, what is the dew point pressure in kPa and what are the unknown mole fractions? Specify whether the unknown mole fractions are vapor or liquid.
A mixture of 100kg mol which contains 60 mol% n-pentane (A) and 40 mol% n-heptane (B)...
A mixture of 100kg mol which contains 60 mol% n-pentane (A) and 40 mol% n-heptane (B) is vaporized at 101.32kpa pressure under differential conditions until 40kg mol are distilled. Use equilibrium data from example 11.3-2 x 1 .867 .594 .398 .254 .145 .059 0 y 1 .984 .925 .836 .701 .521 .271 0 1/(y-x) 8.547 3.021 2.283 2.237 2.260 4.717 A) what is the average composition of the total vapor distilled and the composition of the remaming liquid? X2= .405...