Question

A mixture of 35 mole% n-hexane (C6H14) and rest n-heptane (C7H16) is fed to a flash...

A mixture of 35 mole% n-hexane (C6H14) and rest n-heptane (C7H16) is fed to a flash drum operating at 1500 mmHg pressure. The feed rate is 100 mol/s. The mixture is heated to 100C, and the vapor and liquid are removed continuously. Assuming ideal conditions, calculate vapor and liquid flow rates and compositions.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A mixture of 35 mole% n-hexane (C6H14) and rest n-heptane (C7H16) is fed to a flash...
A mixture of 35 mole% n-hexane (C6H14) and rest n-heptane (C7H16) is fed to a flash drum operating at 1500 mmHg pressure. The feed rate is 100 mol/s. The mixture is heated to 100C, and the vapor and liquid are removed continuously. Assuming ideal conditions, calculate vapor and liquid flow rates and compositions.
a mixture of 65 mol % n hexane and 35 mole % n octane is fed...
a mixture of 65 mol % n hexane and 35 mole % n octane is fed to a flash drum operating at 1500 mm Hg. Feed rate is 100 gmol/s. Mixture is heated to 110 degrees celcius, which the mixture vaporizes. Vapor and liquid products are removed constantly, A) Calculatae the vapor and liquid product compositions (Mol % n hexane and n octane) B) Calculate the vapor and liquid flow rates (gmol/s) y hex = 0.7 x hex = 0.6...
Consider a flash drum operating at 69oC that is fed a mixture of n-pentane, n-hexane and...
Consider a flash drum operating at 69oC that is fed a mixture of n-pentane, n-hexane and nheptane at compositions of 0.55, 0.25 and 0.20, respectively. The vapor pressures for these compounds are 2.755, 1.021, and 0.39 bar, respectively at this temperature. Determine the dew point pressure of this mixture and the liquid composition.
Consider a mixture of 30% n-butane, 35% n-hexane, 35% n-heptane. a. If the temperature is 40...
Consider a mixture of 30% n-butane, 35% n-hexane, 35% n-heptane. a. If the temperature is 40 ?C, calculate the bubble point pressure in kPa and the unknown mole fractions. Specify whether the unknown mole fractions are vapor or liquid. b. If the temperature is 50 ?C, what is the dew point pressure in kPa and what are the unknown mole fractions? Specify whether the unknown mole fractions are vapor or liquid.
Consider a mixture of 30% n-butane, 35% n-hexane, 35% n-heptane. If the pressure is 202 kPa,...
Consider a mixture of 30% n-butane, 35% n-hexane, 35% n-heptane. If the pressure is 202 kPa, calculate the dew point temperature in ?C and the unknown mole fractions. Specify whether the unknown mole fractions are vapor or liquid.
Consider a mixture of 30% n-butane, 35% n-hexane, 35% n-heptane. If the temperature is 50 ?C,...
Consider a mixture of 30% n-butane, 35% n-hexane, 35% n-heptane. If the temperature is 50 ?C, what is the dew point pressure in kPa and what are the unknown mole fractions? Specify whether the unknown mole fractions are vapor or liquid.
A binary mixture of components A and B are to be separated using a flash drum...
A binary mixture of components A and B are to be separated using a flash drum at a pressure of 1 atm . The feed mixture enters the flash vessel at a flowrate of 800 kmol/h, and consists of 50 mol% of component A . (a) Determine the compositions of the liquid and vapor stream leaving the flash vessel if the feed is to be 25% vaporized. (b)Estimate the temperature Tdrum. (c)Determine the compositions of the liquid and vapor stream...
A flash drum is to flash 10000 lb moles/hr of a feed that is 65 mole...
A flash drum is to flash 10000 lb moles/hr of a feed that is 65 mole % n-hexane and 35 moles % n-octane at 1 atm pressure. V/F = 0.4. Find Tdrum, liquid composition, vapor composition. Use the K values given in Table. T/
A mixture of n-heptane and n-hexane containing 25 mol% n-hexane is vaporized at a pressure of...
A mixture of n-heptane and n-hexane containing 25 mol% n-hexane is vaporized at a pressure of 100kPa. Determine the following a)The bubble point temperature b)The composition of the vapor The vapor pressures are given by the Antoine equation: lnP*= A-(B/T-C) Where P is in kPa and T is in K. The Antoine constants are given as follows: n-heptane: A=13.8587,B=2911.32,C=56.51 n-hexane: A=13.8216,B=2697.55,C=48.78
A feed that is 40 mol% methane, 15 mol% n-butane, 10 mol% n-pentane, and 35 mol%...
A feed that is 40 mol% methane, 15 mol% n-butane, 10 mol% n-pentane, and 35 mol% n-hexane is flash distilled. The feed is fed to the flash drum at 150 kmol/h. The drum pressure is 250 kPa and the drum temperature is 10°C. Use the DePriester charts. Find V/F, xi, yi, V, L.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT