Question

This is a MATLAB question FOR ELECTRICAL AND ELECTRONIC
ENGINEERING

Implement a design that solve the problem below in Simulink;
KNUST runs on four (4) energy sources, Hydro from ECG, Solar, Thermal and Biomass. The
source of power that is selected at any time, is controlled by two (2) sensors, A and B. Hydro is
selected if both sensor A and B is on. Solar is selected when sensor only A is on, Thermal is
selected when only sensor B is on and Biomass is selected when all sensors off. Design a system
that help KNUST perform this function of selecting one energy source at time depending on the
sensors state.
Your design should include the following;
• the block diagram,
• identify the number of inputs and outputs and label them,
• the function linking the outputs to the inputs and
• code implementing the function
• implement of the truth table of your function to test if it works as expected in simulink

(NOTE: Use all the necessary or required engineering problem-solving process to solve the
problem. Under each step outline what should be done).

Answer 1