Question

A typical dimmer circuit, designed based on an SCR, is connected to a 100 W bulb....

A typical dimmer circuit, designed based on an SCR, is connected to a 100 W bulb. Typically, a potentiometer is used to adjust the light intensity or to adjust the transfer output power to the bulb. Assume that the AC power supply voltage is equal to 160 V and 60 Hz and the transferred power to the bulb is equal to 100/4 W ( a quarter of the bulb rated power). Find the RMS voltage drop across the bulb.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A 75 watt and a 100 watt light bulb, designed to be used with standard 120...
A 75 watt and a 100 watt light bulb, designed to be used with standard 120 V ac, are connected in a series across a 120 V ac potential difference. The power output is...... greater for the 100 W bulb greater for the 75 W bulb same for both bulbs
A 90 W lightbulb is designed to operate with an applied ac voltage of 130 V...
A 90 W lightbulb is designed to operate with an applied ac voltage of 130 V rms. The bulb is placed in series with an inductor L, and this series combination is then connected to a 50 Hz 200 V voltage source. Part A For the bulb to operate properly, determine the required value for L. Assume the bulb has resistance R and negligible inductance. Express your answer using two significant figures. L=........ H
Consider a series RLC circuit with R = 24 Ω, L = 6.0 mH, and C...
Consider a series RLC circuit with R = 24 Ω, L = 6.0 mH, and C = 32 μF. The circuit is connected to a 10-V (rms), 600-Hz AC source. (a) Is the sum of the voltage drops across R, L, and C equal to 10 V (rms)? (b) Which is greatest, the power delivered to the resistor, to the capacitor, or to the inductor? (c) Find the average power delivered to the circuit.  W
Find the power factor for an RC circuit connected to a 75.0 Hz generator with an...
Find the power factor for an RC circuit connected to a 75.0 Hz generator with an rms voltage of 195 V. The values of R and C in this circuit are 100 Ω and 76.4 μF , respectively.
Q4. A science project exhibit, a capacitor is connected in series with a bulb connected to...
Q4. A science project exhibit, a capacitor is connected in series with a bulb connected to an ac source. If its voltage amplitude is held constant, choose the correct option for the light bulb to glow the brightest at (a) high frequencies (b) low frequencies (c) The brightness will be same at all frequencies. At what frequency the light bulb will glow the dimmest, if capacitor is replaced by inductor? When an AC source is replaced by DC source find...
2. The 60 W incandescent lamp and the 100 W incandescent lamp are each designed to...
2. The 60 W incandescent lamp and the 100 W incandescent lamp are each designed to be connected to a 220 V cable. Both lamps are connected in series and the string is connected to a 220 V mains supply. Explain which bulb will glow brighter. 1. Two conductors with resistances of 10 ohm and 20 ohm are connected in series. and the circuit is connected to a voltage of 60 v. A. Determine the current flow in each conductor....
A series AC circuit contains a 100 omega resistor and an ideal inductor. The rms voltage...
A series AC circuit contains a 100 omega resistor and an ideal inductor. The rms voltage of the generator is 100V and the frequency, 50 Hz. The rms voltage across the inductor is found to be 45. 1)what is the phase angle in degrees? 2)what is the average power supplied by the generator in watts? 3)whatvis the average power dissipated by the inductor in watts?
An RLC circuit with R = 24.6 ?, L = 325 mH, and C = 40.8...
An RLC circuit with R = 24.6 ?, L = 325 mH, and C = 40.8 µF is connected to an ac generator with an rms voltage of 24 V. Determine the average power delivered to this circuit when the frequency of the generator is each of the following. (a) equal to the resonance frequency W (b) twice the resonance frequency W (c) half the resonance frequency W
(15-17)         An AC series RL circuit has a source RMS voltage of 100 V, an inductance...
(15-17)         An AC series RL circuit has a source RMS voltage of 100 V, an inductance of 50 mH, and a resistance of 10 W. The AC source operates at 60 Hz. 15.         For this circuit, which of the following is true? Group of answer choices The current leads the source voltage. The current lags the source voltage. The current and source voltage are in phase. None of the above. Which of the following for this circuit has the greater...
(1)(A)What is the hot resistance of a 41.0 W light bulb with a tungsten filament that...
(1)(A)What is the hot resistance of a 41.0 W light bulb with a tungsten filament that runs on 120 V AC? If the bulb's operating temperature is 2700°C, what is its resistance at 2620°C? The temperature coefficient of resistivity of tungsten is 4.50 10-3 °C−1. (B)An AC voltage source and a resistor are connected in series to make up a simple AC circuit. If the source voltage is given by V = V0 sin(2πft) find the first time after t...