Question

B) A voltage vt) = 25 cos (50t + 30°) V is applied to a parallel...

B) A voltage vt) = 25 cos (50t + 30°) V is applied to a parallel combination of a 10-k2
resistor and a 20-uF capacitor. Find the steady-state current through the capacitor.

Engineering   Electrical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
1.) A 2k resistor has a peak voltage of 10 v applied to it, calulate the...
1.) A 2k resistor has a peak voltage of 10 v applied to it, calulate the instantaneous value of current at 62 degrees? 2.) A sine wave with a peak value of 120 v has an rms value of? 3.) A 0.047 uF capacitor will provide 100k of reactance at ___ Hz? 4.)what is the Xc if a 120 V 60Hz source is connected to a capacitor and the IC is Equal to 0.12 A? 5.) A 60 uH inductor...
A lamp with a breakdown (threshold) voltage of 100 V is hooked in parallel to a...
A lamp with a breakdown (threshold) voltage of 100 V is hooked in parallel to a capacitor. The capacitor begins to charge from a 130 V power supply through a 2E6 ohm resistor. a. If the light flashes 4 times per second, what is the capacitance of the capacitor? b. Describe what happens as the light flashes (what happens to start the flash, what happens during the flash, what happens as the flash ends.)
A series circuit includes an AC power supply with peak voltage 5.4 V and frequency 100...
A series circuit includes an AC power supply with peak voltage 5.4 V and frequency 100 Hz, a 10-ohm resistor and a 120 uF capacitor. What is the impedance, phase angle, and maximum current? Sketch one cycle of the voltage and current as might be seen on an oscilloscope.
A buck converter has an input voltage V in = 24 V, switching frequency f s...
A buck converter has an input voltage V in = 24 V, switching frequency f s = 100 kHz, duty ratio d = 50%, load resistance R L = 10 Ω , inductance 100 μH, and capacitance 680 μF. 1) Calculate the following values, and include units in your answers : a) Average output voltage, V_o b) Average output current, I_o c) Peak - to - peak current ripple, Δi_L d) Output current that will cause the converter to enter...
. A series-parallel combination of resistors is created from 4 resistors, there is a 45 ohm...
. A series-parallel combination of resistors is created from 4 resistors, there is a 45 ohm resistor followed in series by a parallel combination of a 30 Ohm resistor on one branch, and a 10 Ohm and a 15 Ohm resistors in series on the other branch. The whole combination is attached to a 12 V battery. a) find the net resistance of the resistors to the current from the battery. b) What is the current in the 45 Ohm...
A series circuit is constructed with 3 resistors, and an externally applied voltage of 8 V....
A series circuit is constructed with 3 resistors, and an externally applied voltage of 8 V. The resistors have values of: 2.0 ohms, 5.0 ohms and 7.0 ohms. (a) Draw the circuit. (b) Find the equivalent resistance. (c) Find the voltage across each resistor. (d) Find the current across each resistor. (e) What is the total current of the circuit?
A buck-boost converter has an input voltage V_in= 10 V, switching frequency fs= 100 kHz, duty...
A buck-boost converter has an input voltage V_in= 10 V, switching frequency fs= 100 kHz, duty ratio d= 30%, load resistance R_L= 20Ω, inductance =100 μH, and capacitance= 680 μF. 1) Calculate the following values, and include units in your answers: a) Average output voltage,V_o b) Average output current,I_o c) Average input current,I_in d) Average current through the inductor in steady-state e) Peak-to-peak current ripple through the inductor, Δ_iL f) Average inductor current that will cause the converter to enter...
An AC voltage source, v(t)=220sin⁡(314t) V, is applied to a series RC circuit, with C =...
An AC voltage source, v(t)=220sin⁡(314t) V, is applied to a series RC circuit, with C = 100 *10^(-6)F, and R = (35) Ω. a) Find the current, i (t). b) Compute the power factor of the circuit. c) Determine the average power consumed by the resistor.
An AC generator supplies an rms voltage of 230 V at 60.0 Hz. It is connected...
An AC generator supplies an rms voltage of 230 V at 60.0 Hz. It is connected in series with a 0.250 H inductor, a 5.60 μF capacitor and a 366 Ω resistor. What is the impedance of the circuit? Tries 0/20 What is the rms current through the resistor? Tries 0/20 What is the average power dissipated in the circuit? Tries 0/20 What is the peak current through the resistor? Tries 0/20 What is the peak voltage across the inductor?...
1.An AC generator supplies an rms voltage of 220 V at 60.0 Hz. It is connected...
1.An AC generator supplies an rms voltage of 220 V at 60.0 Hz. It is connected in series with a 0.750 H inductor, a 3.50 μF capacitor and a 211 Ω resistor. What is the impedance of the circuit? You have to calculate the impedance for a series RLC-combination. 2. What is the rms current through the resistor? You can use a similar equation fo Ohm's law for an RLC circuit. 3. What is the average power dissipated in the...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT