Question

a tank is 0.6 in diameter and 3.9m high. the tank is filled with a light...

a tank is 0.6 in diameter and 3.9m high. the tank is filled with a light hydraulic oil and has a valve in its base. if the valve has a diameter of 0.114mm and assuming no losses in this system, calculate how quickly the tank would empty if the tank was originally 75% filled with the light oil. the density of light oil is 770kg/m3
Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A closed cylindrical tank 75 cm in diameter and 1.80 meters high is filled with oil...
A closed cylindrical tank 75 cm in diameter and 1.80 meters high is filled with oil (s = 0.80) such that the top cover is under a pressure of 24 kPa. When rotated about its vertical axis at the rate of 240 rpm, determine the force on: a. The top cover. b. The bottom. c. Find the maximum pressure
Q.1: ​The dimension of a cylindrical storage tank is given as 12 m height and 6...
Q.1: ​The dimension of a cylindrical storage tank is given as 12 m height and 6 m diameter. It is filled by light diesel of density of the oil is o.98 g /cm3. Calculate:​​​[12 Marks] ​(i) ​the pressure exerted by the oil at the base of the tank if tank is filled up to 10m ​​​​​​​​​​​​ ​(ii)​total pressure by the oil at the base of the tank.​​​​ ​(iii) ​the force exerted by the oil at the base of the tank.​​​​...
Orange juice is being held in a tank before the bottling operation. The tank is filled...
Orange juice is being held in a tank before the bottling operation. The tank is filled to 4 m depth, has a 2.5 m diameter and is pressurized at 2 bar (gauge pressure). At the bottom of the tank there is discharge port that is 15 cm in diameter. (2 Points) Calculate the discharge velocity of the orange juice and (1 Point) the amount of time required to drain the tank, assuming the flow is steady and frictionless. Assume the...
a circular cone shaped tank that is 10 feet high, is filled to about 2 feet...
a circular cone shaped tank that is 10 feet high, is filled to about 2 feet in height with lb/ft^3 density olive oil. How much work is required to pump the oil to the edge of the tank
A conical tank standing 6 m high has a 4 m diameter. A 200 mm diameter...
A conical tank standing 6 m high has a 4 m diameter. A 200 mm diameter orifice is located at its bottom having a meter coefficient of 0.65. A. Determine the time needed to empty the tank if it was initially full of water. B. Compute the time needed to drain half of the volume if initially the container was full.
A large diameter closed top tank is filled with a depth of 3 meters of a...
A large diameter closed top tank is filled with a depth of 3 meters of a fluid (density 1200 kg/m3). A small pipe leading from the bottom of the tank must carry the fluid some height above the fluid level in the tank. a) If a pressure of 2.5 Atmospheres is maintained in the space above the fill line in the tank how high above the fill line can the pipe carry the fluid and still provide an exit speed...
A small laser emits light at power 6.88 mW and wavelength 441 nm. The laser beam...
A small laser emits light at power 6.88 mW and wavelength 441 nm. The laser beam is focused (narrowed) until its diameter matches the 1255 nm diameter of a sphere placed in its path. The sphere is perfectly absorbing and has density 4.00×103kg/m3. What is the beam intensity at the sphere's location? Calculate the radiation pressure on the sphere. Calculate the magnitude of the corresponding force. Calculate the magnitude of the acceleration that force alone would give the sphere?
#1. A street light is supported by two wires and each makes a different angle from...
#1. A street light is supported by two wires and each makes a different angle from each other. The one on the left is 32 degrees and the one on the right is 43 degrees. Find the tension in each wire if the street light has a mass of 60.0 kg. #2. There are three masses: m1 = 2.0 kg, m2 = 5.0 kg and m3 = 7.0 kg. The masses are all affixed to a massless rod of length...
A sample, 75 mm in diameter and 20 mm high, taken from a clay layer 10...
A sample, 75 mm in diameter and 20 mm high, taken from a clay layer 10 m thick, was tested in an oedometer with drainage at the upper and lower boundaries. It took the laboratory sample 15 minutes to reach 50% consolidation. If the clay layer in the field has the same drainage condition as the laboratory sample, calculate how long it will take the 10 m clay layer to achieve 50% and 90% consolidation. How much more time would...
You’re at a picnic that has a circular jug of lemonade, measuring 39 cm in diameterand...
You’re at a picnic that has a circular jug of lemonade, measuring 39 cm in diameterand 61 cm tall (which would hold about 10 gallons). It is placed on the very edge ofa 1 meter high picnic table. This cooler has a spigot down at the bottom to fill yourcups, but it has popped off, leaving a 1.15 cm diameter hole open to the air. If thecooler is not sealed (so that the top is open to the air) and...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT