Question

Both BOD and COD test results are expressed in terms of oxygen. Why?

Both BOD and COD test results are expressed in terms of oxygen. Why?

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Tests such as the COD (Chemical Oxygen Demand), BOD (Biochemical Oxygen Demand) and Permanganate Index are...
Tests such as the COD (Chemical Oxygen Demand), BOD (Biochemical Oxygen Demand) and Permanganate Index are a measure of the oxidisable content of water and a guide to the potential consumption of DO (dissolved oxygen). Suppose that effluent with a high COD or Permanganate Index of 1000 mg/L was discharged into a stream. Describe what would happen to the DO (dissolved oxygen) in this environment.
Why is blank titre value higher than back titre value in chemical oxygen demand (COD) experiment?
Why is blank titre value higher than back titre value in chemical oxygen demand (COD) experiment?
When expressed in terms of milliliter of oxygen consumed per kg of body weight per minute...
When expressed in terms of milliliter of oxygen consumed per kg of body weight per minute what does 1 MET equal
A BOD test was conducted on the unchlorinated effluent of a municipal wastewater treatment plant at...
A BOD test was conducted on the unchlorinated effluent of a municipal wastewater treatment plant at 20°C. The wastewater portion added to a 300-mL BOD bottle was 30 mL, and the dissolved oxygen (DO) values listed below were measured using a dissolved-oxygen probe. No seed was added to the bottles. What is the BOD value for each “valid” sample? Valid samples are ones that do not violate the following two rules: 1. DOf is less than 1.0 mg/L (unclear if...
A BOD test was run in a 300 mL bottle on a 30 mL dilution of...
A BOD test was run in a 300 mL bottle on a 30 mL dilution of water with a 5 mL seed. The BOD5 of the seed was 150 mg/L. The initial dissolved oxygen level in the water was 7.9 mg/L, The day 5 level of dissolved oxygen in the bottle was 4.7 mg/L. What is the BOD5 of the water sample?
T test results- t-statistic, df, p-value. What the output means, both statistically and in terms of...
T test results- t-statistic, df, p-value. What the output means, both statistically and in terms of differences between the sites? t(5) = -5.11, p=0.0037 Anova results- F-statistic, df (between and within groups), p-value. What the output means, both statistically and in terms of differences between the sites? F(5, 36) = 4.26, p=0.0038 Linear Regression results-F-statistic, df (regression and residual), p-value, R2. What the output means, both statistically and in terms of differences between the sites? F(1,91)=794, p=0.011, R2=0.90
A BOD3 test was run and the results were: Dilution = 30 Initial DO = 9.5...
A BOD3 test was run and the results were: Dilution = 30 Initial DO = 9.5 mg/L Final DO = 2.0 mg/L The reaction rate constant k has been found to be 0.25 day-1 . (a) What is the BOD3? (b) What would be the ultimate carbonaceous BOD? (c) What is the BOD5? (d) What would be the remaining oxygen demand after five days
For peteroleum engineering: Why the pore volume compressibility equation is expressed with a positive sign? And...
For peteroleum engineering: Why the pore volume compressibility equation is expressed with a positive sign? And how can I express volume of compressibility in terms of porosity instead of volume?
.Proteus and Escherichia both have the same results for Indole test. a. True b. False
.Proteus and Escherichia both have the same results for Indole test. a. True b. False
why is effect size important to report after the results of a hypothesis test
why is effect size important to report after the results of a hypothesis test