Question

For the pavement system with the following properties, Design an appropriate structure .for this pavement Top...

For the pavement system with the following properties, Design an appropriate structure .for this pavement Top layer: HMA with E = 400,000 psi, layer coefficient = 0.41., and min thickness 4 inches Intermediate layer: Base coarse with E = 20,000 psi, layer coefficient = 0.10, drainage .coefficient = 0.8, and min. thickness 6 inches Bottom layer: sub-base coarse with E= 10,000 psi, layer coefficient 0.09, and drainage coefficient = 0.8 Subgrade with Mr = 5000 psi If the predicted ESAL = 8.0 x106, R= 99%, .So = 0.50, and OPSI = 2.0 ,SN1 = 1.20 SN2 = 1.9, and SN3 = 3.1 Find: The thickness of the Asphalt concrete

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
14. One pavement structure consisting of 2 pavement layers over subgrade has a required structural number...
14. One pavement structure consisting of 2 pavement layers over subgrade has a required structural number (SN) of 5.60. The maximum thickness for granular base is 26 in. Layer coefficient for asphalt surface (a1)is 0.44 and for granular base (a2) is 0.14. The drainage modifying factor is 1.00. Assuming there are two design options for asphalt surface: (a) thickness of 4 in; (b) thickness of 5 in. Determine which design is preferred for asphalt surface and justify your choice with...
M2 and M3 are equal to 1.0 for materials in the pavement structure. Determine the thickness...
M2 and M3 are equal to 1.0 for materials in the pavement structure. Determine the thickness required for all layer if hot-mix asphalt (HMA), dense-graded crushed Stone base, and crushed stone subbase are the material to be used. (Assume the following parameters: ESAL = 12x106, R = 95%, S0 = 0.30 and ΔPSI = 2)  Question-11 Determine the thickness of D1
A new road proposed in rural area from Arau to Pauh. Design the pavement for road...
A new road proposed in rural area from Arau to Pauh. Design the pavement for road consisting of an asphalt concrete surface, a mechanically stabilized crushed aggregate base, and a sand sub-base by using JKR Standard. The initial daily traffic volume (ADT- two way) is 8600. Percentage of commercial vehicles is 10% with annual growth rate 5%. The equivalent factor is 2.0, subgrade CBR 5%, carriageway width and shoulder width is 6m and 1.5m respectively. The design period 10 years...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT