Question

2) Ethylenediamine tetraacetic acid (EDTA) is a hexaprotic acid that was used as a food preservative...

2) Ethylenediamine tetraacetic acid (EDTA) is a hexaprotic acid that was used as a food preservative to prevent metal leaching in canned food before monolayer coatings were developed. Let’s say that you find an old can of spam in your grandparents kitchen from 1946, and one of the listed ingredients is EDTA. You decide to collect the fluid from the spam container and titrate it with base to determine the concentration of EDTA.

a. Write the chemical formula for EDTA with all of the acidic hydrogen atoms listed first

b. Determine the molarity of a Ca(OH)2 solution you make by dissolving 6.557 grams of Ca(OH)2 into a 750.00 mL volumetric flask to titrate your sample.

c. Write the balanced chemical reaction that occurs when you titrate your Ca(OH)2 solution into the spam fluid containing EDTA (assume only EDTA is present in the spam)

d. If it takes 35 mL of your Ca(OH)2 solution to titrate the spam fluid to the end point, what is the concentration of EDTA in the spam container in molarity, if the spam fluid being titrated has a volume of 16 fluid oz?

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
0.02500 M EDTA solution were used to titrate 10.00 mL saturated Ca(OH)2 solution. EDTA=C10H14N2Na2O8 The average...
0.02500 M EDTA solution were used to titrate 10.00 mL saturated Ca(OH)2 solution. EDTA=C10H14N2Na2O8 The average volume of EDTA solution needed was 11.15 mL to titrate a 10.00 mL saturated solution of Ca(OH)2. milimoles of EDTA= 0.02500(M) *11.15ml = 0.2875milimoles Milimoles of Ca2+= strength * volume = 2.845milimoles ____________________________________________________________ 1.) How many grams of Ca(OH)2 can be dissolved in 1-L solution? 2.) Ksp
a.) What is the molarity of a solution prepared by dissolving 47.1 grams of Ca(OH)2 in...
a.) What is the molarity of a solution prepared by dissolving 47.1 grams of Ca(OH)2 in a total solution volume of 400.0 mL? b.) What volume of the solution in part (a) is required to prepare 5.00 L of 0.100 M Ca(OH)2? c.) The dilute solution in part (b) is used in a titration experiment to neutralize 35.00 mL of an HClO solution. 24.48mL of 0.100 M Ca(OH)2 are required to fully neutralize the hypochlorous acid. Give the balanced chemical...
A 50.00 mL sample of aqueous Ca(OH)2 requires 34.66 mL of a 0.944M nitric acid for...
A 50.00 mL sample of aqueous Ca(OH)2 requires 34.66 mL of a 0.944M nitric acid for neutralization. Calculate the concentration (molarity) of the original solution of calcium hydroxide.
a) A strontium hydroxide solution is prepared by dissolving 10.55 g of Sr(OH)2 in water to...
a) A strontium hydroxide solution is prepared by dissolving 10.55 g of Sr(OH)2 in water to make 59.00 mL of solution.What is the molarity of this solution? (1.470M is the right answer) b) Next the strontium hydroxide solution prepared in part (a) is used to titrate a nitric acid solution of unknown concentration.Write a balanced chemical equation to represent the reaction between strontium hydroxide and nitric acid solutions. c) If 23.9 mL of the strontium hydroxide solution was needed to...
A strontium hydroxide solution is prepared by dissolving 10.40 g of Sr(OH)2 in water to make...
A strontium hydroxide solution is prepared by dissolving 10.40 g of Sr(OH)2 in water to make 47.00 mL of solution.What is the molarity of this solution? Express your answer to four significant figures and include the appropriate units. SubmitMy AnswersGive Up Part B Next the strontium hydroxide solution prepared in part (a) is used to titrate a nitric acid solution of unknown concentration.Write a balanced chemical equation to represent the reaction between strontium hydroxide and nitric acid solutions. Express your...
The hydroxide ion concentration, [OH-], in each of your trials can be calculated from the concentration...
The hydroxide ion concentration, [OH-], in each of your trials can be calculated from the concentration of the hydrochloric acid, 0.050 M HCl, and the volume of both the HCl and Ca(OH)2 used in the titration. According to the net ionic equation (calcium hydroxide, Ca(OH)2 (s), in water) determine the ratio of moles of calcium ion, Ca2+, to moles of hydroxide ion, OH-, in the solution of calcium hydroxide, Ca(OH)2. Using this ratio, determine the molarity of calcium ion in...
Constant-boiling HCl can be used as a primary standard for acid-base titrations. A 50.00 mL sample...
Constant-boiling HCl can be used as a primary standard for acid-base titrations. A 50.00 mL sample of constant-boiling HCl with a concentration of 0.1251 M was collected and titrated to an end point with 33.37 mL of Ba(OH)2 solution. What is the molarity of the Ba(OH)2 solution?
Water Hardness Lab follow up Questions Trial Initial EDTA Volume (mL) Final EDTA Volume (mL) Total...
Water Hardness Lab follow up Questions Trial Initial EDTA Volume (mL) Final EDTA Volume (mL) Total Volume of EDTA Used (mL) 1 8.5 6 2.5 2 5.0 3.0 2.0 3 3.0 0.5 2.3 Average Volume of EDTA Used (mL): 2.3 Average Volume of EDTA Used (mL) Concentration Ca2+ Ions Per Liter of Water (mol/L) Water Hardness (ppm CaCO3) 2.3 0.0023 230 2.Approximately how much calcium would you ingest by drinking six, 8-oz glasses of your local water? Hint: 1 oz...
Vitamin C tablets contain ascorbic acid (C6H8O6= 176.1232 g/mol) and a starch "filler" which holds them...
Vitamin C tablets contain ascorbic acid (C6H8O6= 176.1232 g/mol) and a starch "filler" which holds them together. Your goal today is to determine how much vitamin C or ascorbic acid, HC6H7O6 is present in the tablet. This can be determined by titrating ascorbic acid, HC6H7O6 with calcium hydroxide solution, Ca(OH)2(aq) (74.0918 g/mol) according to the following equation: 2HC6H7O6(aq) + Ca(OH)2(aq) ---> Ca(C6H7O6)2(aq) + 2H2O(l) First you must make 500 mL of a 0.1012 M standard solution of Ca(OH)2 from a...
1. The printed label on a bottle of commercial vinegar states that the acetic acid concentration...
1. The printed label on a bottle of commercial vinegar states that the acetic acid concentration is 5%. (Assume % is weight solute/volume solution) (a) If the manufacturer had reported two significant figures in the concentration, what range of values would round to 5.0 %? (b) Calculate the concentration in molarity of the upper and lower values from (a). The molecular weight of acetic acid is 60.05 g/mol. Pay attention to significant figures. 2. Acetic acid is a monoprotic weak...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT