Question

A 10V DC source is connected in series with a switch, a 50ohm resistor, and a...

A 10V DC source is connected in series with a switch, a 50ohm resistor, and a 13mH inductor. The switch is closed at t=0. What will be the approximate voltage drop across the resistor when t>3tau?

Engineering   Electrical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A V = 84-V source is connected in series with an R = 1.1-kΩ resistor and...
A V = 84-V source is connected in series with an R = 1.1-kΩ resistor and an L = 34-H inductor and the current is allowed to reach maximum. At time t = 0 a switch is thrown that disconnects the voltage source, but leaves the resistor and the inductor connected in their own circuit. a) How much time, in milliseconds, is needed for the current in the circuit to drop to 9 % of its value at t =...
A 23-Ω resistor, 58-μF capacitor, and 3.5-mH inductor are connected in series with an AC source...
A 23-Ω resistor, 58-μF capacitor, and 3.5-mH inductor are connected in series with an AC source of amplitude 12 V and frequency 120 Hz. Part (h) With a source voltage of Vsource = V0 cos(2πft), what is the instantaneous voltage, in volts, across the capacitor at time t = 2.25 s? Part (i) What is the amplitude of the voltage drop across the inductor, in volts? Part (j) With a source voltage of Vsource = V0cos(2πft), what is the instantaneous...
A battery is connected to a resistor and an uncharged capacitor. The switch for the circuit...
A battery is connected to a resistor and an uncharged capacitor. The switch for the circuit is closed at t = 0 s. (Assume all circuit elements are connected in series.) (a) While the capacitor is being charged, which of the following is true? A. Current through and voltage across the resistor decrease. B. Current through and voltage across the resistor first increase and then decrease. C. Current through and voltage across the resistor first decrease and then increase. D....
A 10 .0 Ω resistor, 10.0 mH inductor, and a 10.0μF capacitor are connected in series...
A 10 .0 Ω resistor, 10.0 mH inductor, and a 10.0μF capacitor are connected in series with a 10.0 kHz voltage source. The current through the circuit is 0.20 A. Find the voltage drop across each of the 3 elements. What is the resonance frequency of this circuit? Is the voltage lagging or leading the current in this circuit?
A 65 ohm resistor is connected in series to a 7.36 mH inductor, an open switch,...
A 65 ohm resistor is connected in series to a 7.36 mH inductor, an open switch, and a 27 volt battery. After the switch is closed, how long will it take for the current in the inductor to reach 109 mA? Express your answer in milliseconds.
A 10.0 - resistor, 10.0-mH inductor, and 10.0-uF capacitor are connected in series with a 10.0-kHz...
A 10.0 - resistor, 10.0-mH inductor, and 10.0-uF capacitor are connected in series with a 10.0-kHz voltage source. The ms current through the circuit is 0.200 A. Find the ms voltage drop across each of the 3 elemets.
An RC circuit is connected across a DC voltage source through an open switch. The switch...
An RC circuit is connected across a DC voltage source through an open switch. The switch is closed at t = 0s. Which of the following is a correct statement regarding this circuit? a) The voltage on this capacitor after two time constants is about 100% of its maximum value b) The charge on the capacitor after one time constant is about 50% of its maximum value c)The charge on the capacitor after four time constants is about 98% of...
A 48-?F capacitor is connected in series with a 32-kΩ resistor and a 6.0-V DC source....
A 48-?F capacitor is connected in series with a 32-kΩ resistor and a 6.0-V DC source. (a) If the capacitor is initially uncharged, how long will it take the capacitor to charge to within 0.50% of maximum? (b) If the capacitor is replaced with an 96-mH inductor and the inductor has no current flowing through it initially, how long will it take the current through the inductor to be within 0.50% of maximum?
For an inductor in a DC circuit involving a switch that can be opened or closed,...
For an inductor in a DC circuit involving a switch that can be opened or closed, the the induced emfs in the inductor.... A) keep the current in the inductor the same as it was before the switch was opened/closed. B) keep the voltage across the inductor the same as it was before the switch was opened/closed. C) make sure that the current through the inductor is immediately zero if the switch is opened, and immediately not zero if the...
An AC voltage source is connected in series to an inductor, a capacitor, and a resistor...
An AC voltage source is connected in series to an inductor, a capacitor, and a resistor of 5 Ohms. At the frequency when the phase angle is zero, capacitive reactance is 6 Ohms. What is the total impedance of the of the circuit at a frequency which is a factor of 2.4 times less than this frequency? Answer in Ohms.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT