Question

Predict the type and geometry of bedforms in a sand-bed channel, d35=0.35 mm. and d65=0.42 mm,...

  1. Predict the type and geometry of bedforms in a sand-bed channel, d35=0.35 mm. and d65=0.42 mm, sloping at S0=0.001 with flow depth h= 1 m when the water temperature is 15C◦.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Predict the type and geometry of bedforms in a sand-bed channel, d35=0.35 mm. and d65=0.42 mm,...
Predict the type and geometry of bedforms in a sand-bed channel, d35=0.35 mm. and d65=0.42 mm, sloping at S0=0.001 with flow depth h= 1 m when the water temperature is 15C◦.
7. A) Find the depth of water flowing through a triangular channel having a bed slope...
7. A) Find the depth of water flowing through a triangular channel having a bed slope of 1 in 3500 and side slope of 1:1, when it carries 1.2 m3/s. Take Manning’s Coefficient N = 0.014 B) For a most economical trapezoidal section of side slope 2h: 5V, bed slope of 1 in 2000 and C = 50. Find the rate of flow if the bottom width of the channel is 5 m.
A discharge of 4.25 m3 /s occurs within a trapezoidal channel with a base width of...
A discharge of 4.25 m3 /s occurs within a trapezoidal channel with a base width of 3m, 3:1 side slopes (i.e. Z = 3), a longitudinal bed slope of 0.0009 m/m with a Manning’s roughness coefficient of 0.025 (i.e. sand). State the normal flow depth (yn) critical flow depth (yc) and the Froude Number of the flowing water.
Examine the stability of the bed material rs= 2650 kg/m3, and d50=1mm of a wide stream...
Examine the stability of the bed material rs= 2650 kg/m3, and d50=1mm of a wide stream having slope of 0.001 and carrying a flow at depth of 0.3 m when the water temperature is 15Cand angle of repose = 32.
Examine the stability of the bed material rs= 2650 kg/m3, and d50=1mm of a wide stream...
Examine the stability of the bed material rs= 2650 kg/m3, and d50=1mm of a wide stream having slope of 0.001 and carrying a flow at depth of 0.3 m when the water temperature is 15Cand angle of repose = 32.
a)      A vertical plate of 700 mm wide and 120 cm height is maintained at a...
a)      A vertical plate of 700 mm wide and 120 cm height is maintained at a temperature of 95oC in a room at 25oC with an air conditioning with velocity of 36000 cm/min. Calculate the heat transfer coefficient and convective heat transfer rate. (b)      Two concentric cylinders are located in a large room. Determine the view factors for the two cylinders when the length is 20 cm, the inner radius (r1) is 5 cm and the outer radius (r2) 10...
1. What is the resistance of a NichromeTM wire at 0.0 ∘C∘C if its resistance is...
1. What is the resistance of a NichromeTM wire at 0.0 ∘C∘C if its resistance is 106.9 ΩΩ at 12.5 ∘C∘C? The temperature coefficient of resistivity for NichromeTM is 4.00×10−4 (∘C)−1(∘C)−1 . Enter your answer with four significant figures. 2. A heart defibrillator is used to enable the heart to start beating if it has stopped. This is done by passing a large current of 12 AA through the body at 30 VV for a very short time, usually about...