Question

Water hardness is expressed as parts per million calcium carbonate. If there are 654.1mg of calcium...

Water hardness is expressed as parts per million calcium carbonate. If there are 654.1mg of calcium carbonate in every 10.0 kg water, what is the water hardness expressed in ppm? Answer with 3 significant figures and do not put units in the answer box (they are ppm).

Homework Answers

Answer #1

Hardness = 65.4 ppm

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
You have been tasked with determining the concentration of Ca2+ in an unknown solution of calcium...
You have been tasked with determining the concentration of Ca2+ in an unknown solution of calcium carbonate (CaCO3). You titrate 50.0 ml of the unknown solution with 0.0250 M EDTA. It requires 16.85 ml of EDTA to reach the equivalence point. Determine [Ca2+] of the unknown solution, in ppm. Recall that ppm (parts per million) is equal to mg/L. 2. If a sample of tap water contains 400 ppm of Ca2+ and 80 ppm of Mg2+, what is the hardness...
1.Percent by mass to parts per million. Convert 4.45% NaOH(aq) solution to parts per million NaOH...
1.Percent by mass to parts per million. Convert 4.45% NaOH(aq) solution to parts per million NaOH in the solution. Do NOT assume a dilute aqueous solution! Use the molar mass of the entire salt formula, not either ion alone. The solution density is 1.047 g/mL. Answer to 3 significant figures with appropriate units. 2. Molarity to parts per million. Convert 1.672 mol/L MgCl2(aq) solution to parts per million Mg2+ in the solution. Do NOT assume this is a dilute aqueous...
Hardness in groundwater is due to the presence of metal ions, primarily Mg 2 + and...
Hardness in groundwater is due to the presence of metal ions, primarily Mg 2 + and Ca 2 + . Hardness is generally reported as ppm CaCO 3 . To measure water hardness, a sample of groundwater is titrated with EDTA, a chelating agent, in the presence of the indicator Eriochrome Black T, symbolized as In. Eriochrome Black T, a weaker chelating agent than EDTA, is red in the presence of Ca 2 + and turns blue when Ca 2...
The reaction between the hydrochloric acid and the calcium carbonate is: 2 HCl (aq) + CaCO3...
The reaction between the hydrochloric acid and the calcium carbonate is: 2 HCl (aq) + CaCO3 (s) ---> CaCl2 (aq) + H2O (l) + CO2 (g) About 90 mL of water and 10.00 mL of 0.5023 M Hydrochloric acid solution was added to a 1.028 g paper sample. Following our procedure the mixture was stirred and then heated just to a boiling to expel the carbon dioxide. Titration of the excess HCl remaining in the mixture required 16.41 mL (corrected...
Calculate the value for total water hardness (amount of Ca + Mg). This will be reported...
Calculate the value for total water hardness (amount of Ca + Mg). This will be reported in terms of CaCO3 in mg/L. The moles of (Ca+Mg) is equal to the moles of EDTA used in the titration. Multiply the molarity of the EDTA by the volume in L of EDTA used to get the moles. Then convert the moles to mass using the molar mass of CaCO3. Finally convert your answer to mg and divide by the total volume in...
The amount of gas (in parts per million, ppm) measured by a device is normally distributed....
The amount of gas (in parts per million, ppm) measured by a device is normally distributed. The probability of gas level below 2 ppm is 20% and the probability of gas level above 8 ppm is 10%. What should be the standard deviation (?) such that the probability of gas level between 3 ppm and 7 ppm is 95%?
Hardness in groundwater is due to the presence of metal ions, primarily Mg2 and Ca2 ....
Hardness in groundwater is due to the presence of metal ions, primarily Mg2 and Ca2 . Hardness is generally reported as ppm CaCO3. To measure water hardness, a sample of groundwater is titrated with EDTA, a chelating agent, in the presence of the indicator eriochrome black T, symbolized here as In. Eriochrome black T, a weaker chelating agent than EDTA, is red in the presence of Ca2 and turns blue when Ca2 is removed. Red blue Ca (ln)2+ +EDTA------->Ca EDTA...
A water sample has a pH of 8.35 and a total calcium concentration of 1.63 ppm....
A water sample has a pH of 8.35 and a total calcium concentration of 1.63 ppm. What is the concentration of HCO3- in moles per liter? [do not neglect [H+], [OH-]]
A 2.050×10−2M solution of NaCl in water is at 20.0∘C. The sample was created by dissolving...
A 2.050×10−2M solution of NaCl in water is at 20.0∘C. The sample was created by dissolving a sample of NaCl in water and then bringing the volume up to 1.000 L. It was determined that the volume of water needed to do this was 999.4 mL . The density of water at 20.0∘C is 0.9982 g/mL. Part A Calculate the molality of the salt solution. Express your answer to four significant figures and include the appropriate units. Part B Calculate...
A 2.100×10−2 M solution of NaCl in water is at 20.0∘C. The sample was created by...
A 2.100×10−2 M solution of NaCl in water is at 20.0∘C. The sample was created by dissolving a sample of NaCl in water and then bringing the volume up to 1.000 L. It was determined that the volume of water needed to do this was 999.4 mL . The density of water at 20.0∘C is 0.9982 g/mL. Part A Calculate the molality of the salt solution. Express your answer to four significant figures and include the appropriate units. Part B...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT