JustAAA
Home
Questions
Share
Post a Question (with Answer)
Coins
Ask a Question
Log In
Sign Up
Home
/
Civil-Engineering Questions
Search
Civil-Engineering Questions
A short, square tied column has a minimum area of reinforcing steel of 3.24 in2 and...
Define the Darcy law linked to Head Loss
Requirements for Type I Portland Cement in Government Specification (Physical Test and Specifications)
what is force?
(e) Describe, using sketches the two-peg test. Also, explain why and how it is used.
Consider the PR/image efforts of Donald Trump in his role as president. What has he...
how setting out done in land surveying?
in experimental with a diameter 0.001 [m] and surface tension of 73 milli-Newtons/meter and contact angle...
1. What would be the basic description for angular frequency? A) The speed of rotation B)...
For the following data, using Mohr’s circle of stress and trigonometry, a) Find the principal stresses...
A layer of soil consists of 3m thick of moderately dense sand having water content of...
A copper column has 0.5 meter radius. It carries a load of 30 MN. If the...
Water flows in a 350-mm-diameter pipe at the rate of 600 liters per second. The pipe...
analyse, design and report on a viable longitudinal span and beam, suspend slab design and column...
1. Discuss examples of the ethical considerations engineers must think about in public sector projects. 2....
Rolled steel is the term used for steel that has been completely oxidized to remove trapped...
A rectangular suppressed weir, 1 m in length is used in a reservoir with an area...
A conical tank standing 6 m high has a 4 m diameter. A 200 mm diameter...
Fill in the Blanks: 01. The minimum thickness of backfill shall be ___ _____. 02. The...
Mathematical Relationship between shear force and bending moment?
Parents want to save $20,000 to support their child’s education. The child just turned five. They...
a)What is the main difference between elastic and plastic deformations ? b)what is "anelasticity" ?
İtem 3 Learning Goal: To set up and evaluate the equations of motion in a normal-tangential...
İtem 1 Learning Goal: To analyze the motion of a body that is traveling along a...
You should use excel functions and capabilities to solve the problem. Inputs and outputs should be...
A fluid of constant density equal to 880 kg/m3 is flowing steadily through a contracting expanding...
The elastic modulus, yield strength and ultimate strength of a certain material are 110 GPa, 240...
As a project engineer how would you control the quality of work during construction of a...
.Calculate the effluent BOD of 2 Stage trickling filter with the following data: Flow rate =...
what are 5 safety issues on construction sites and their solutions ?
( Calculate the modulus of elasticity of a fiber-reinforced polymer composite under isostrain condition if the...
ELABORATE: 1. Why is there a difference between the relaxation loss of SRT compared to that...
A circular pile 28m long has a diameter of 450 mm. It is installed in CLAY...
Problem 2: The initial cost of a paint sand mill, including its installation is P 800,000....
A Contractor is engaged under a contract incorporating NEC4 ECC Option B. All of the design...
Calculate the settlement under the center of a flexible foundation 4 m by 4 m due...
) A reinforced earth retaining wall is to be 30 ft high (H=30 ft). - Backfill:...
(c) A 55m long dam wall holds back water that is 175m deep. Calculate: (i) The...
Distances (ft) from the left bank, corresponding depths (ft), and velocities (ft/sec), respectively, are given for...
If you don't have a LinkedIn profile, don't want to create a LinkedIn profile, or don't...
A lap joint with two plates fastened together by four rivets is to be used as...
Prove that the pressure variation along a capillary tube is p_i= p_o - gamma * h,...
Given the data table below develop the precedence network and perform the CPM calculations. Then, using...
A proposed building includes a 100m2 atrium covered by a horizontal glass roof. the glass is...
(a) In order to stabilise a section of a proposed road on a deep soft clay...
Morehead county had advertised a bid to remodel offices. Two contractors submitted identical bids ($10,000), in...
The maximum Manning’s n for a smooth, clean, unlined, uniform earthen channel is about (based on...
A ship floating in sea water displaces 108 m3 of water. Determine the weight of the...
A six- lane freeway (three lanes in each direction) in a scenic area has a measured...
cost range of the following ground improvemnet techniques vibrocompaction precompression of soil thermal stabilization ground freezing...
What are the classifications of the building materials which were developed by CSI (Construction Specification Institute)?
The same direction for orientation measurement a. can have different horizontal circle reading b. must have...
7. In general, creating reservoirs in deserts is not efficient. Lake Mead, the lake created by...
A general contractor hired a subcontractor to furnish and install all of the equipment for a...
Sometimes when applying the Bernoulli equation we assume energy is constant, and sometimes we don’t. Explain...
A horizontal curve on a three-lane highway with 12-ft lanes has a PC located at station...
A horizontal curve is being designed for a new four-lane roadway with 11-ft lanes. The PT...
A single-lane racetrack is being constructed with a 150 mph design speed. A curve on this...
Research a LEED certified green building. What level certification (e.g., gold, silver) did it achieve? What...
A complete mixed activated sludge process aeration tank treats 5 MLD sewage having the influent and...
8. A wastewater has a dissolved oxygen concentration of 2.0 mg/L and a discharge rate of...
LEED is for all building types and all building phases including new construction, interior fit outs,...
sustainable Construction In what ways (and to whom) can the conventional approach to building be more...
Uniform flow in an open channel exists when the flow is steady and the channel is...
Who should maintain a construction diary? Select one: a.The construction inspector b.The resident engineer c.The contractor’s...
Determine the curve length required so that the elevation on the track at station 126 +...
A sprayer has 20 nozzles over a boom width of 36 feet. The average output per...
Determine the minimum length of a vertical curve necessary for it to be adequate, under the...
A horizontal curve of radius 5620 ft is designed for 60 mph. The roadway is a...
Determine the elevations for each standard station between PVC and PVT from a vertical curve connecting...
If 24 students run 24 Casagrande Tests and 24 Thread Rolling Tests, how many different Plasticity...
Q6: Name the type of cement used in Oil refinery wells of Petroleum industry. Describe about...
A cubical tank has sides of 4.5m which contains three immiscible liquids at same depths. A...
A ship floating in sea water displaces 108 m3 of water. Determine the weight of the...
What are the duties of a Quantity Surveyor employed by the Contractor?
In a stage of an oedometer test the total stress was raised by 100 kPa. The...
A research experiment requires that you have a laminar air flow of 20 ° C per...
2. A simply supported beam has a width of 200mm and depth of 400mm is 4m...
Pump Cavitation A centrifugal pump at its optimum point of operation transports 3.2 mcs and generates...
A wastewater treatment plant designed for a community of 60,000 people has a flow of 100...
‹
1
2
...
19
20
21
22
23
24
25
...
47
48
›
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
Ask a Question
ADVERTISEMENT
Active Questions
A cannon fires a cannon ball eastwards at a speed of 20 m/s (this speed is...
asked 5 minutes ago
Briefly describe how you would generate a calibration curve for turbidity given one stock solution at...
asked 10 minutes ago
A single acting reciprocating pump running at 24 rpm has a bore and stroke of 12.5...
asked 12 minutes ago
Write a program that reads words form a text file and displays all the words (duplicates...
asked 26 minutes ago
What are Advantages and disadvantages of vi and emacs?
asked 32 minutes ago
You have been asked to design a database capable of logging project (work) hours for a...
asked 37 minutes ago
how to write n-queens function using bitwise operations using MIPS or just give an explained algorithm...
asked 39 minutes ago
Question 1. Should Community College measure its success by checking if more students are joining college...
asked 45 minutes ago
A projectile is launched with an initial velocity of 41.3 m/s at 62.2 ∘ above the...
asked 47 minutes ago
A sorting algorithm is stable if objects with equal keys appear in the same order in...
asked 59 minutes ago
Mary, Janet and Shantil formed a partnership, Brookdale Senior Care (BSC), to provide temporary housing and...
asked 1 hour ago
A certain toaster has a heating element made of Nichrome resistance wire. When the toaster is...
asked 1 hour ago