Ask Question and Get Free Answers - JUST Ask And Answer > QA > Industry > Transportation
My car battery used in a group of 24 lead-acid batteries, single voltage 2V, 330AH, does charging method and r

Answers:2   |   LastAnswerAt:06.10  

Question
visitor
Evan smith 
Asked at 2011.06.13 00:06:33
My car battery 1 set of 24 lead-acid batteries, single voltage 2V, 330AH, does charging method and related technical parameters, the more detailed the better, thanks
answer bozi zhang  Answered at 2011.06.13 00:06:33
General sightseeing large electric vehicles, there are vehicle charger, vehicle battery chargers that charge and not cure the power or water, generally sulfide, and then a dedicated charger to be charged to sulfur, charging must see Charger rated output voltage and current, the charge can not exceed, or bad charger to sulfur constant current charging method can be used while charging, charging the former depends on whether the water shortage, water shortage should pay. Charger can charge if the voltage of 28v 100A, and (preferably current and charge voltage variable speed drive), battery components channeling United 12 1 2 group, in parallel with the rechargeable battery, charging current is 28V, current 330, which have been has 2 equal to 10 x 66A, take charge current 66A, until the electrolyte boil 3 hours, and then measuring the electrolyte density, electrolyte density, such as less than 1.28 shall be adjusted to 1.31 after cooling out of the electrolyte to the battery in Canada , put a few hours and then measured, such as more than 1.28 can be directly transferred to 1.28 in distilled water battery.
1
  • Answer This Question:My car battery used in a group of 24 lead-acid batteries, single voltage 2V, 330AH, does charging method and r 

  • insert image

    image url:

    such as: http://www.justaaa.com/**/**.jpg

    insert video

    vedio url: