Question
Define the "center line", "LCL" and "UCL" for an c chart.
Define the "center line", "LCL" and "UCL" for an c chart.
Homework Answers
Answer #1
Not the answer you're looking for?
Similar Questions
A fraction nonconforming control chart with center line 0.10, UCL = 0.19, and LCL = 0.01...
A fraction nonconforming control chart with center line 0.10,
UCL = 0.19, and LCL = 0.01 is used to control a process.
Find the average run length if the process fraction noncon-
forming shifts to 0.20.
A fraction nonconforming control chart with n = 400 has the following parameters: UCL = 0.0962,...
A fraction nonconforming control chart with n = 400 has the
following parameters: UCL = 0.0962, Center line = 0.0500, LCL =
0.0038
a. Find the width of the control limits in standard deviation
units.
b. Suppose the process fraction nonconforming shifts to 0.15.
What is the probability of detecting the shift on the first
subsequent sample?
Explain why there is often no “lower control limit” (LCL) on a p-chart (or a c-chart).
Explain why there is often no “lower control limit” (LCL) on a
p-chart (or a c-chart).
P Chart -This is the Sample Sample Portion Defective LCL Pbar UCL 0 0.06 0 0.16...
P Chart
-This is the Sample
Sample
Portion Defective
LCL
Pbar
UCL
0
0.06
0
0.16
0.65
1
0
0
0.16
0.65
2
0.04
0
0.16
0.65
3
0.1
0
0.16
0.65
4
0.06
0
0.16
0.65
5
0.04
0
0.16
0.65
6
0.12
0
0.16
0.65
7
0.1
0
0.16
0.65
8
0.08
0
0.16
0.65
9
0.08
0
0.16
0.65
10
0.1
0
0.16
0.65
11
0.12
0
0.16
0.65
12
0.1
0
0.16
0.65
13
0.12
0...
A rum producer monitors the position of its label on the bottle by sampling two bottles...
A rum producer monitors the position of its label on the bottle
by sampling two bottles from each batch. One quantity measured is
the distance from the bottom of the bottle neck to the top of the
label. The process mean should be ? = 1.6 inches. Past experience
indicates that the distance varies with ? = 0.13 inch.
The mean distance x
for each batch sample is plotted on an x control chart.
Calculate the center line and control...
A rum producer monitors the position of its label on the bottle by sampling two bottles...
A rum producer monitors the position of its label on the bottle
by sampling two bottles from each batch. One quantity measured is
the distance from the bottom of the bottle neck to the top of the
label. The process mean should be μ = 1.6 inches. Past experience
indicates that the distance varies with σ = 0.15 inch. (a) The mean
distance x for each batch sample is plotted on an x control chart.
Calculate the center line and...
A rum producer monitors the position of its label on the bottle by sampling three bottles...
A rum producer monitors the position of its label on the bottle
by sampling three bottles from each batch. One quantity measured is
the distance from the bottom of the bottle neck to the top of the
label. The process mean should be μ = 1.6 inches. Past
experience indicates that the distance varies with σ =
0.15 inch.
(a) The mean distance x for each batch sample is
plotted on an x control chart. Calculate the center line and...
Sample 1 2 3 4 12.3 11.9 12.0 12.1 12.2 12.2 12.2 11.8 12.1 12.2 11.8...
Sample
1
2
3
4
12.3
11.9
12.0
12.1
12.2
12.2
12.2
11.8
12.1
12.2
11.8
11.8
Calculate UCL and LCL for a mean chart. Assume the standard
deviation is unknown. Round to 1 decimal.
a.
UCL=11.7, LCL=12.4
b.
UCL=11.7, LCL=0
c.
UCL=12.4, LCL=0
d.
UCL=12.4, LCL=11.7
e.
cannot be determined
Using the data provided in Question 38 above, how many up/down
runs are present?
a.
0
b.
1
c.
2
d.
3
e.
4
Using the data provided in...
19,Suppose that you monitor the fraction defectives in ounces of a process that fills beer cans....
19,Suppose that you monitor the fraction defectives in ounces of
a process that fills beer cans. The data given below were collected
in the production process. Each day, 20 cans are inspected. What
control chart would be the best for process monitoring? Calculate
UCL and LCL of the relevant chart.
Days # of defectives
1 2
2 3
3 5
4 1
5 2
x-bar chart, UCL = 0.042 and LCL = 0
c chart, UCL = 0.1462...
joe studied his control chart and notice it had been built with repeated samples if 10...
joe
studied his control chart and notice it had been built with
repeated samples if 10 units and three sigma limits that were ucl
109.0125 and lcl 90.9875 what is process stardard vdeviation? 9.5
6.7
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
ADVERTISEMENT
Active Questions
asked 3 minutes ago
asked 7 minutes ago
asked 7 minutes ago
asked 7 minutes ago
asked 19 minutes ago
asked 29 minutes ago
asked 30 minutes ago
asked 34 minutes ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago