Question

Data were collected from a process in which the factor of interest was whether a finished...

Data were collected from a process in which the factor of interest was whether a finished item contained a particular attribute. The fraction of items that did not contain the attribute was recorded. A total of 20 samples were selected. The common sample size was 150 items. The total number of nonconforming items was 720. Based on these data, compute the upper and lower control limits for the p-chart.

Math   Statistics-And-Probability   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Data were collected on a quantitative measure with a subgroup size of three observations. Thirty subgroups....
Data were collected on a quantitative measure with a subgroup size of three observations. Thirty subgroups.                         Xdoublebar=2.33        Rbar=0.80 Determine the Shewhart factors that will be needed if xbar- and R-charts are to be developed. Compare the upper and lower control limits for the R-charts. Compute the upper and lower control limits for the xbar-chart.
A quality manager asked his team to implement p control chart for a process that was...
A quality manager asked his team to implement p control chart for a process that was recently introduced. The team collected samples of size n = 100 parts hourly over a period of 30 hours and determined the proportion of nonconforming parts for each sample. The mean proportion of nonconforming parts for 30 samples turned out to be 0.025. Determine the upper and lower control limits for the p chart. (2 Points) Discuss how you will use the p Chart...
Twenty-five samples of 100 items each were inspected when a process was considered to be operating...
Twenty-five samples of 100 items each were inspected when a process was considered to be operating satisfactorily. In the 25 samples, a total of 185 items were found to be defective. (a) What is an estimate of the proportion defective when the process is in control? (b) What is the standard error of the proportion if samples of size 100 will be used for statistical process control? (Round your answer to four decimal places.) (c) Compute the upper and lower...
A. A series of 33 samples of size 100 have been produced. The total number of...
A. A series of 33 samples of size 100 have been produced. The total number of defectives in the samples is 51. Determine the fraction of nonconforming product control chart upper limit      B. Determine the Average Run Length (ARL) of a x-bar chart with limits where the process has shifted one standard deviation in one direction     C. A product has a target length of 20.0 cm, and the process has a standard value for the standard deviation of 0.05 cm....
Twelve​ samples, each containing five​ parts, were taken from a process that produces steel rods at...
Twelve​ samples, each containing five​ parts, were taken from a process that produces steel rods at Emmanual​ Kodzi's factory. The length of each rod in the samples was determined. The results were tabulated and sample means and ranges were computed. Refer to Table S6.1 - Factors for computing control chart limits (3 sigma) for this problem. Sample ​Size, n Mean​ Factor, A2 Upper​ Range, D4 Lower​ Range, D3 2 1.880 3.268 0 3 1.023 2.574 0 4 0.729 2.282 0...
Twenty-five samples of 100 items each were inspected when a process was considered to be operating...
Twenty-five samples of 100 items each were inspected when a process was considered to be operating satisfactorily. In the 25 samples, a total of 180 items were found to be defective. (a)What is an estimate of the proportion defective when the process is in control? _________________. (b)What is the standard error of the proportion if samples of size 100 will be used for statistical process control? (Round your answer to four decimal places.) ________________. (c)Compute the upper and lower control...
QUESTION 20 Five samples of size 12 were collected. The data are provided in the following...
QUESTION 20 Five samples of size 12 were collected. The data are provided in the following table: Sample number 1 2 3 4 5 Sample mean 4.80 4.62 4.81 4.55 4.92 Sample standard deviation 0.30 0.33 0.31 0.32 0.37 The upper control limit (UCL) and lower control limit (LCL) for an s-chart are: 1.LCL = 0.0971, UCL = 0.5868. 2.LCL = 0.1154, UCL = 0.5366. 3.LCL = 0.1011, UCL = 0.6109. 4.LCL = 0.1034, UCL = 0.6246. 5.LCL = 0.0994,...
1 An x̅ chart with a sample size of 4 is used to control the mean...
1 An x̅ chart with a sample size of 4 is used to control the mean of a normally distributed quality characteristic. It is known that process standard deviation is 8. The upper and lower control limits of the chart are 147 and 123 respectively. Assume the process mean shifts to 121. What is the probability that this shift is detected on the first subsequent sample? What is expected number of samples taken before the shift is detected? 2 The...
1.       Twelve samples, each containing five parts, were taken from a process that produces steel rods....
1.       Twelve samples, each containing five parts, were taken from a process that produces steel rods. The length of each rod is the sample was determined. The results were tabulated and sample means and ranges were computed. Sample Sample Mean (in.) Range (in.) Sample Sample Mean (inches) Sample Range (inches) 1 10.001 0.011 2 10.003 0.014 3 9.995 0.007 4 10.007 0.022 5 9.997 0.013 6 9.999 0.012 7 10.001 0.008 8 10.006 0.014 9 9.994 0.005 10 10.002 0.010...
Twelve samples, each containing five parts, were taken from a process that produces steel rods. The...
Twelve samples, each containing five parts, were taken from a process that produces steel rods. The length of each rod in the samples was determined. The results were tabulated and sample means and ranges were computed. The results were: Sample Sample Mean (in.) Range (in.) 1 10.002 0.011 2 10.002 0.014 3 9.991 0.007 4 10.006 0.022 5 9.997 0.013 6 9.999 0.012 7 10.001 0.008 8 10.005 0.013 9 9.995 0.004 10 10.001 0.011 11 10.001 0.014 12 10.006...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT