Question

Find the shape factor for cylindrical powder particles having length to diameter ratio of 3 to...

Find the shape factor for cylindrical powder particles having length to diameter ratio of 3 to 1.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Calculate the gain factor for a cylindrical proportional counter having a central wire diameter of 2.54...
Calculate the gain factor for a cylindrical proportional counter having a central wire diameter of 2.54 x 10-3 cm and a cathode diameter of 1.50 cm, filled with methane at 76 torr, with 800 V applied potential.
silica sand particles of spherical shape have a density of 2650 kg/m^3 and voidage 43 percentage...
silica sand particles of spherical shape have a density of 2650 kg/m^3 and voidage 43 percentage when rest in a packed bed column of diameter D=10 mm. the total mass of particles is 1 kg.the bed is to be fludised by a flowing non reacting gas moving upwards through the bed of solids. i) what is the bulk density of the solid particle? 4 marks ii)calculate the static bed height (H) by the solid particles when rest in the cylindrical...
A cylindrical specimen of stainless steel having diameter of 12.8 mm and a guage length of...
A cylindrical specimen of stainless steel having diameter of 12.8 mm and a guage length of 50.88 mm(2.000in.) is pulled in tension. Use the load-elongation characterisitcs shown in the following table. Plot the data as engineering stress vs. engineering strain. Then compute the modulus of elasticity, yeild strength at a strain offset of 0.002, determine the tensile strength of this alloy, approximate ductility in percent elongation and the modulus of resilience. N mm 0 50.8 12700 50.825 25400 50.851 38100...
5. A machine is producing metal cans that are cylindrical in shape. A sample of 12...
5. A machine is producing metal cans that are cylindrical in shape. A sample of 12 cans are taken and the average diameter was found to be 10 mm. Find a 95 percent confidence interval for the mean diameter of pieces for this machine. Assume a normal distribution. standard Deviation was 0.282.
Problem. A cylindrical specimen of a hypothetical metal having a diameter of 7.671 mm and a...
Problem. A cylindrical specimen of a hypothetical metal having a diameter of 7.671 mm and a gauge length of 251.905 mm is pulled in tension. Use the load–elongation characteristics shown in the following table to complete parts (a) through (f). (a) Plot the data as stress (MPa) versus strain (b) Compute the modulus of elasticity in GPa (c) Determine the yield strength at a strain offset of 0.002 (d) Determine the tensile strength of this alloy (e) What is the...
A certain type of stainless steel powder is supposed to have a mean particle diameter of...
A certain type of stainless steel powder is supposed to have a mean particle diameter of μ = 15 μm. A random sample of 86 particles had a mean diameter of 15.2 μm, with a standard deviation of 1.8 μm. A test is made of H0 : μ = 15 versus H1 : μ ≠ 15. Find the P-value. Round the answer to four decimal places. Numeric Response
A cylindrical pressure vessel has a thickness of 10mm. The diameter of the pressure vessel is...
A cylindrical pressure vessel has a thickness of 10mm. The diameter of the pressure vessel is 450mm and its length is 2m. determine maximum internal pressure that can be applied if the longitudnal stress is limited to 200 MPA and the circumferential stress is limited to 80 MPA. Also find the allowable strain produced as a result of applied pressure if the Poisson ratio 0.3?
46. A cylindrical concrete pile with a diameter of 8 in. and a length of 10...
46. A cylindrical concrete pile with a diameter of 8 in. and a length of 10 ft. is to be used to support a foundation in clay soil. Calculate the end bearing (EB) and skin friction (SF) for this pile. Assume c = 25 kPa, Nc = 9, and α = 1. a. EB = 33.56 kN, SF = 7.545 kN b. EB = 3.27 kip, SF = 7.439 kip c. EB = 1.11 kip, SF = 8.65 kip d....
A cylindrical sample of a soil taken from a sampling tube is 6.3 cm diameter and...
A cylindrical sample of a soil taken from a sampling tube is 6.3 cm diameter and 12.5 cm long and has a mass of 683 gm. After oven drying it weighs 495 gm. Assuming that the particles have a specific gravity, Gs=2.70, calculate the water content, bulk density, dry density, void ratio and degree of saturation?
I have a barrel extruder that is extruding plastic. I need to find the shape factor...
I have a barrel extruder that is extruding plastic. I need to find the shape factor for a square die opening given a width and length of the die opening. I also know the viscosity of the plastic melt. Any direction would be greatly appreciated.