Question

QUESTIONS FOR SERIES AND PARALLEL CIRCUITS 1. i) How does the equivalent resistance of a series...

QUESTIONS FOR SERIES AND PARALLEL CIRCUITS

1. i) How does the equivalent resistance of a series circuit compare to each individual resistor? ii) Answer the same question for a parallel circuit?

2. Assume that you have three 2Ω resistors. Show using a schematic drawing, how youwould connect these together to achieve the following resistances: (a) 1Ω, (b) 3Ω, and (c)4 Ω. Note that you do not always have to use all three resistors to achieve your goal.

PAGE 2

3. Assume that a 120 Ω resistor and ammeter are in series. A voltmeter is in parallel withboth of them. The meters are not ideal, but have internal resistances of ?? = 10.0?Ωand ?? = 2.00Ω. If the voltmeter reads 8.25 volts, what is the actual voltage across theresistor?

4. Note: The circuit in this problem is wired differently from the circuit in problem3.Assume that a 470kΩ resistor is in parallel with the voltmeter from problem 3. If theammeter from problem 3 is in series with this parallel combination, what is the actual current through the resistor if the ammeter reads 2.00 ???

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Series/Parallel Circuits: When unequal resistors are connected in series across an ideal battery, the same power...
Series/Parallel Circuits: When unequal resistors are connected in series across an ideal battery, the same power is dissipated in each one. the potential difference across each is the same. the equivalent resistance of the circuit is equal to the average of all the resistances. the current flowing in each is the same. the equivalent resistance of the circuit is less than that of the smallest resistor.
1.Two 60.0 Ω resistors are connected in parallel and this parallel arrangement is then connected in...
1.Two 60.0 Ω resistors are connected in parallel and this parallel arrangement is then connected in series with a 30.0 Ω resistor. The combination is placed across a 120V potential difference. Can you design the circuit diagram using above data? According to your observation show that total voltage is equal to the sum of the individual voltage and also show that total power dissipated is equal to the sum of the power dissipated by individual resistor. Also suggest what will...
1.) A 2.00 µF and a 7.50 µF capacitor can be connected in series or parallel,...
1.) A 2.00 µF and a 7.50 µF capacitor can be connected in series or parallel, as can a 50.0 kΩ and a 100 kΩ resistor. Calculate the four RC time constants (in s) possible from connecting the resulting capacitance and resistance in series. resistors and capacitors in series: __________s resistors in series, capacitors in parallel: ____________s resistors in parallel, capacitors in series:________________s capacitors and resistors in parallel: ____________________s 2) A 1.16 MΩ voltmeter is placed in parallel with a...
QUESTION 1 How do you connect a voltmeter to a circuit? a) in series b) None...
QUESTION 1 How do you connect a voltmeter to a circuit? a) in series b) None of the answers is correct. c) either way is correct d) in parallel QUESTION 2 Can you connect a Digital multimeter (Ohmmeter) to a resistor in circuit to measure the resistance of resistor? a) No. b) Yes. c) Yes, if the Ohmmeter has a low internal resistance. d) Yes, if the Ohmmeter has a high internal resistance. QUESTION 3 Three resistors R1, R2 and...
1.In your Ohm's law lab if you let the current (I) in your circuit remain constant,...
1.In your Ohm's law lab if you let the current (I) in your circuit remain constant, what will happen to the voltage (V) if the resistance (R) is tripled? 2.If you connect a 10-Volt supply voltage across a parallel combination of two 10 Ohm resistors, what should be the ammeter reading connected in series with the voltage source? 3.When you check a 7-Amps reading on your multimeter connected in series with a 3 Ohm resistor, what will the voltmeter reading...
(1)(A)What resistance do you need to connect in parallel to a 120 Ω resistor to get...
(1)(A)What resistance do you need to connect in parallel to a 120 Ω resistor to get a total of 51.0 Ω? (B)You have in your possession numerous resistors with a value of 3.50 mΩ each. hat is the smallest number you could hook together to get an effective resistance of 1.505 Ω? (Enter the smallest possible whole number of resistors.) (C)Your car's 27.7-W headlight and 2.75-kW starter are ordinarily connected in parallel in a 12.0-V system. What power would one...
Consider three different AC circuits (A−C) consist of a resistor, capacitor and inductor, connected in series...
Consider three different AC circuits (A−C) consist of a resistor, capacitor and inductor, connected in series to a function generator that creates a voltage of ∆v = 2.0 cos(ωt) Volts with ω = 2x104 rad/s. The circuits are: (A) R = 3 Ω; C = 25 μF; L = 300 μH (B) R = 4 Ω; C = 6.25 μF; L = 250 μH (C)R = 5 Ω; C = 5 μF; L = 500 μH Rank the circuits by...
1. What resistance can be connected in parallel with a 20 Ω to obtain the equivalent...
1. What resistance can be connected in parallel with a 20 Ω to obtain the equivalent resistance as 4Ω? Group of answer choices 3 10 5 15 What resistance can be connected in parallel with a 20 Ω to obtain the equivalent resistance as 4Ω? Group of answer choices 3 10 5 15 2.   A battery ε = 40 V with internal resistance (r) of 1 Ω is connected in series with two resistors R1 = 22 Ω and R2...
Question 1 1. Nonutility power producers (companies that don’t own transmission lines) use a lot more...
Question 1 1. Nonutility power producers (companies that don’t own transmission lines) use a lot more natural gas than traditional utilities. Group of answer choices True False Flag this Question Question 2 2. Most of your electric bill is from the transmission and generation of electric power, and not from its production. Group of answer choices True False Flag this Question Question 3 3. Alternating current is used in homes, and direct current is used in cars. Group of answer...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT