Question
A cylinder with a piston contains 0.160 mol of nitrogen at 1.80×105 Pa and 310 K...
A cylinder with a piston contains 0.160 mol of nitrogen at 1.80×105 Pa and 310 K . The nitrogen may be treated as an ideal gas. The gas is first compressed isobarically to half its original volume. It then expands adiabatically back to its original volume, and finally it is heated isochorically to its original pressure.
a.) Find the work done by the gas during the initial compression.
b.)Find the heat added to the gas during the initial compression.
c.)Find internal-energy change of the gas during the initial compression.
Homework Answers
Answer #1
Not the answer you're looking for?
Similar Questions
A cylinder with a piston contains 0.100 mol of nitrogen at 2.00×105 Pa and 320 K...
A cylinder with a piston contains 0.100 mol of nitrogen at
2.00×105 Pa and 320 K . The nitrogen may be treated as
an ideal gas. The gas is first compressed isobarically to half its
original volume. It then expands adiabatically back to its original
volume, and finally it is heated isochorically to its original
pressure.
A) Find the work done by the gas during the initial
compression
B) Find the heat added to the gas during the initial
compression...
A cylinder containing 3.0 moles of a monatomic, ideal gas begins at a pressure of 2.0...
A cylinder containing 3.0 moles of a monatomic, ideal gas begins
at a pressure of
2.0 × 105 Pa, with a volume of 0.0365 m3. The
gas then goes through the following three processes, which comprise
a thermal cycle:
The gas is expanded isothermally, to twice its original
volume.
The gas is cooled isobarically, back to its original
volume.
The gas is heated isochorically, up to its original
pressure.
(a) Find the initial temperature of the gas, in
Kelvin.
(b)...
n = 3.50 mol of Hydrogen gas is initially at T = 310 K temperature and...
n = 3.50 mol of Hydrogen gas is initially at T = 310 K
temperature and pi = 3.22×105 Pa pressure.
The gas is then reversibly and isothermally compressed until its
pressure reaches pf = 7.51×105 Pa. What is
the volume of the gas at the end of the compression process??
A 0.50 L container is initially filled with Nitrogen gas at STP. The gas expands against...
A 0.50 L container is initially filled with Nitrogen gas at STP.
The gas expands against a piston adiabatically to a volume of 50.0%
larger than the original volume. The Nitrogen may be treated as an
ideal gas with ?=7/5.
a) Calculate the final
temperature and pressure.
b) What is the work
done?
c) Sketch a pV-diagram
for this process. On this diagram also draw the isotherms for the
initial and final temperatures.
ir is mostly a mixture of diatomic oxygen and nitrogen; treat it as an ideal gas...
ir is mostly a mixture of diatomic oxygen and nitrogen; treat it
as an ideal gas with
?=1.40,
?v =20.8J⋅mol−1⋅K−1.
Theuniversalgasconstantis?=8.315J⋅mol−1 K−1. The compression
ratio of a diesel engine is 15:1, meaning that air in the
cylinders is compressed to 1/15 of its initial volume. If the
initial pressure is 1.01 × 105 Pa and the initial temperature is
300 K, find:
i) The final temperature after adiabatic compression.
ii) The final pressure after adiabatic compression.
iii) How much work...
A vessel with a movable piston contains 1.90 mol of an ideal gas with initial pressure...
A vessel with a movable piston contains 1.90 mol of an ideal gas
with initial pressure
Pi = 2.03 ✕ 105 Pa,
initial volume
Vi = 1.00 ✕ 10−2
m3,
and initial temperature
Ti = 128 K.
(a) What is the work done on the gas during a constant-pressure
compression, after which the final volume of the gas is 2.50
L?
J
(b) What is the work done on the gas during an isothermal
compression, after which the final pressure...
n = 2.58 mol of Hydrogen gas is initially at T = 376 K temperature and...
n = 2.58 mol of Hydrogen gas is initially at T = 376 K
temperature and pi = 1.88×105 Pa pressure. The gas is then
reversibly and isothermally compressed until its pressure reaches
pf = 8.78×105 Pa. What is the volume of the gas at the end of the
compression process? What would be the temperature of the gas, if
the gas was allowed to adiabatically expand back to its original
pressure?
Constant amount of ideal gas is kept inside a cylinder by a piston. Then the gas...
Constant amount of ideal gas is kept inside a cylinder by a
piston. Then the gas expands isobarically. Compare the initial (i)
and the final (f) physical quantities of the gas to each other.
The internal energy Uf is ... Ui.
The temperature Tf is ... Ti.
The volume Vf is ... Vi.
The entropy Sf is ... Si.
The pressure pf is ... pi.
A piston/cylinder device operating in a cycle with steam as the working fluid executes the following...
A piston/cylinder device operating in a cycle with steam as the
working fluid executes the following steps: (1) steam at 550 kPa
and 200 degrees celsius is heated at constant volume to a pressure
of 800 kPa. (2) It then expands, reversibly and adiabatically, to
the initial temperature of 200 degrees celsius. (3) Finally, the
steam is compressed in a mechanically reversible, isothermal
process to the initial pressure of 550 kPa.
Please show all the steps, and please do not...
Constant amount of ideal gas is kept inside a cylinder by a piston. Then the gas...
Constant amount of ideal gas is kept inside a cylinder by a
piston. Then the gas expands adiabatically. Compare the initial (i)
and the final (f) physical quantities of the gas to each other.
The pressure pf is ... pi.
The temperature Tf is ... Ti.
The internal energy Uf is ... Ui.
The entropy Sf is ... Si.
The volume Vf is ... Vi.
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
ADVERTISEMENT
Active Questions
asked 13 minutes ago
asked 22 minutes ago
asked 28 minutes ago
asked 41 minutes ago
asked 42 minutes ago
asked 44 minutes ago
asked 56 minutes ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago