Question
. An adiabatic heat exchanger receives 3 kg/s of R12 as a saturated vapor at 960...
. An adiabatic heat exchanger receives 3 kg/s of R12 as a saturated vapor at 960 kPa and condenses it to a saturated liquid at this pressure. The cooling water at 100 kPa enters the heat exchanger at 20 C and leaves at 35 C. Determine the heat transfer to the water in kW and the water flowrate in kg/s. 385.6 kW 6.09 kg/s
Homework Answers
Answer #1
Not the answer you're looking for?
Similar Questions
An adiabatic counterflow heat exchanger receives 0.3 m3/s of saturated steam vapor at 200 kPa and...
An adiabatic counterflow heat exchanger receives 0.3
m3/s of saturated steam vapor at 200 kPa and condenses
it to a saturated liquid on the shell side. Water
enters the tubes at 25 C and leaves at 40 C. Determine
the second law efficiency for the heat exchanger.
saturated steam at 300 C is used to heat countercurrently flowing stream of methanol vapor from...
saturated steam at 300 C is used to heat countercurrently
flowing stream of methanol vapor from 65C to 260 C in and adiabatic
heat exchanger. The flow rate of the methanol is 5500 standard
liters per minute, and the steam condenses and leaves the heat
exchanger as liquid water at 90 C.
A) calculate the required flow rate of the entering steam in
m^3/min.
B) Calculate the rate of heat transfer from the water to the
methanol (kW).
Saturated liquid ethanol at 500 kPa enters a heat exchanger and is brought to 950oK at...
Saturated liquid ethanol at 500 kPa enters a heat exchanger and
is brought to 950oK at constant pressure, after which it enters a
reversible adiabatic turbine where it expands to 100 kPa. Find the
heat transfer in the heat exchanger, the turbine exit temperature,
and turbine work.
Saturated steam at 350 C is used to heat a countercurrent stream of methanol vapor from...
Saturated steam at 350 C is used to heat a countercurrent stream
of methanol vapor from 70C to 300C in an adiabatic heat exchanger.
The flow rate of methanol is 6000 L (STP) / min, and the steam
condenses and leaves the exchanger as liquid water at 80C.
a) Calculate the necessary flow of the incoming steam in m 3 /
min.
b) Calculate the heat flux transferred from water to methanol
(kW).
Saturated water vapor leaves a steam turbine at a flow rate of 1.47 kg/s and a...
Saturated water vapor leaves a steam turbine at a flow rate of
1.47 kg/s and a pressure of 0.51 bar. The vapor is to be completely
condensed to saturated liquid in a shell-and-tube heat exchanger
that uses city water as the cold fluid. The water enters the
thin-walled tubes at 17oC and is to leave at 57.6
oC. Assuming an overall heat transfer coefficient of
2000 W/m2K, determine the required heat exchanger
surface area and the water flow rate. cp,c...
Water is used to cool R-134a in the condenser of a heat exchanger. The refrigerant enters...
Water is used to cool R-134a in the condenser of a heat
exchanger. The refrigerant enters the counter-flow heat exchanger
at 800 kPa, 80 0C and a mass flow rate of 2 kg/s. The refrigerant
exits as a saturated liquid. Cooling water enters the condenser at
500 kPa and 18 0C and leaves the condenser at 30 0C. Determine the
necessary mass flow rate of water. Each fluid is assumed to flow at
constant pressure.
Mixture of saturated liquid-vapor water enters a compressor with mass flow rate of 2 kg/s, velocity...
Mixture of saturated liquid-vapor water enters a compressor with
mass flow rate of 2 kg/s, velocity of 150 m/s, pressure of 10 kpa
and quality of 0.85. The substance leaves the compressor with the
velocity of 40 m/s at 7 MPa and 450°C. The heat loss from the
compressor is 200 kW. Neglecting the changes in potential energy,
determine the compressor required power.
Problem #1 Saturated steam at 300°C is used to heat a counter-currently flowing stream of methanol...
Problem #1
Saturated steam at 300°C is used to heat a counter-currently
flowing stream of methanol vapor from 65°C to 260°C in an adiabatic
heat exchanger. The flow rate of the methanol is 5500 standard
liters per minute (at STP), and the steam condenses and leaves the
heat exchanger as liquid water at 90°C.
a) Draw a diagram of the process.
b) Calculate the required flow rate of the entering steam in
m3/min.
c) Calculate the rate of heat transfer...
A power plant uses an adiabatic single-flash process coupled with a liquid-vapor separator and a turbine....
A power plant uses an adiabatic single-flash process coupled
with a liquid-vapor separator and a turbine. (1) Flash Chamber (2)
Seperator (3) Steam Turbine. Saturated liquid water enters the
flash chamber (which behaves like a throttling valve) at 230
degrees C at a rate of 44 kg/s and leaves at a pressure of 700 kPa.
The stream then enters the separator where the liquid is collected
at the bottom of the unit while the vapor portion of the stream
continues...
Saturated steam at 200 C, 1000 kg/h is used to boil toluene in a heat exchanger....
Saturated steam at 200 C, 1000 kg/h is used to boil toluene in a
heat exchanger. The toluene enters at 50 C, 1 bar, 3500 kg/h and
leaves as vapor at 1 bar. The steam condensate leaving is saturated
water at 200 C. Calculate the exit toluene temperature.
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
ADVERTISEMENT
Active Questions
asked 4 minutes ago
asked 8 minutes ago
asked 17 minutes ago
asked 21 minutes ago
asked 42 minutes ago
asked 1 hour ago
asked 1 hour ago
asked 2 hours ago
asked 2 hours ago
asked 2 hours ago
asked 2 hours ago
asked 2 hours ago