Question
A steel wire in a piano has a length of 0.650 m and a mass of...
A steel wire in a piano has a length of 0.650 m and a mass of 4.09E-3 kg. To what tension must this wire be stretched in order that the fundamental vibration correspond to middle C (fc = 261.6 Hz on the chromatic musical scale)? REPORT IN 4 DECIMALS
Homework Answers
Answer #1
Not the answer you're looking for?
Similar Questions
A steel wire in a piano has a length of 0.5000 m and a mass of...
A steel wire in a piano has a length of 0.5000 m and a mass of
4.200 10-3 kg. To what tension must this wire be stretched so that
the fundamental vibration corresponds to middle C (fC = 261.6 Hz on
the chromatic musical scale)?
--------
Two pieces of steel wire with identical cross sections have
lengths of L and 2L. The wires are each fixed at
both ends and stretched so that the tension in the longer wire is...
A piano wire with mass 2.95 g and length 79.0 cmis stretched with a tension of...
A piano wire with mass 2.95 g and length 79.0 cmis stretched
with a tension of 25.0 N . A wave with frequency 100 Hz and
amplitude 1.50 mm travels along the wire.
Part A
Calculate the average power carried by the wave.
Part B
What happens to the average power if the wave amplitude is
halved?
7a. Express the fundamental frequency of a piano wire fixed at both ends in terms of...
7a. Express the fundamental frequency of a piano wire fixed at
both ends in terms of its tension FT, length L, radius r, and the
3D mass density ρ of the wire material.
7b. Given: radius r = 0.375 × 10-3 m, length L = 0.501 m, and
ρsteel = 7.86 × 103 kg/m3. What is the tension required for a steel
piano string tuned to middle C (f = 261.626 Hz)?
8.One of the harmonic frequencies of tube A...
A piano wire with mass 3.35 grams and a length of 78.0cm is stretched with a...
A piano wire with mass 3.35 grams and a length of 78.0cm is
stretched with a tension of 28.0N. A wave with a frequency 120Hz
and an amplitude 1.60 mm travels along the wire. Calculate the
power carried by the wave? What happens to the average power if the
waves amplitude is halved?
A steel piano wire (Y = 200 GPa) has a diameter of 0.790 mm. At one...
A steel piano wire (Y = 200 GPa) has a diameter of 0.790 mm. At
one end it is wrapped around a tuning pin of diameter 8.00 mm. The
length of the wire (not including the wire wrapped around the
tuning pin) is 66.0 cm. Initially, the tension in the wire is 381
N. To tune the wire, the tension must be increased to 413 N.
Through what angle must the tuning pin be turned?
A steel piano wire (Y = 200 GPa) has a diameter of 0.780 mm. At one...
A steel piano wire (Y = 200 GPa) has a diameter of 0.780 mm. At
one end it is wrapped around a tuning pin of diameter 8.00 mm. The
length of the wire (not including the wire wrapped around the
tuning pin) is 66.0 cm. Initially, the tension in the wire is 379
N. To tune the wire, the tension must be increased to 407 N.
Through what angle must the tuning pin be turned?
(θ = answer°)
2. Suppose a piano tuner stretches a steel piano wire 6.5 mm. The wire was originally...
2. Suppose a piano tuner stretches a steel piano wire 6.5
mm.
The wire was originally 0.825 mm in diameter, 1.43 m long, and has
a Young's modulus of 2.10x1011 N/m2.
Calculate the force a piano tuner applies to stretch the steel
piano wire in Newtons.
F=__________
3. Suppose a 66-kg mountain climber has a 0.86 cm diameter nylon
rope.
By how much does the mountain climber stretch her rope, in
centimeters, when she hangs 43 m below a rock...
With what tension must a rope with length 2.70 m and mass 0.170 kg be stretched...
With what tension must a rope with length 2.70 m and mass 0.170
kg be stretched for transverse waves of frequency 43.0 Hz to have a
wavelength of 0.810 m ?
A Piano that has a string of L = 2(m) long and a mass of m...
A Piano that has a string of L = 2(m) long and a mass of m =
0.2(g) over that length. The Piano is tightened and its tension is
T = 20(N). Determine the speed of propagation for a wave along that
string? Let the fundamental mode has a wavelength of λ = L 2
Determine the frequency of sound associated with that string?
A uniform steel beam (mass 43.7 kg, length 9.79 m) is hinged at one end to...
A uniform steel beam (mass 43.7 kg, length 9.79 m) is hinged at
one end to a wall and has two wires attached at the other end. Wire
1 (length 4.67 m) is horizontal and is attached to the wall, and
wire 2 is vertical and is attached to the floor If the system is in
equilibrium and the tension in wire 2 is 130 N, find the magnitude
of the tension in wire 1, in
N.
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
ADVERTISEMENT
Active Questions
asked 19 seconds ago
asked 13 minutes ago
asked 15 minutes ago
asked 19 minutes ago
asked 24 minutes ago
asked 33 minutes ago
asked 39 minutes ago
asked 44 minutes ago
asked 45 minutes ago
asked 51 minutes ago
asked 1 hour ago
asked 1 hour ago