Question

An aluminum rod with a square cross section is 2.0 m long and 6.6 mm on...

An aluminum rod with a square cross section is 2.0 m long and 6.6 mm on edge. (a) What is the resistance between its ends? (b) What must be the diameter of a cylindrical copper rod of length 2.0 m if its resistance is to be the same as that of the aluminum rod? The resistivity of aluminum is 2.75 × 10-8 Ω·m and the resistivity of copper is 1.69 × 10-8 Ω·m.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Two square-cross-section rods, one steel and the other copper, are welded end to end. Each rod...
Two square-cross-section rods, one steel and the other copper, are welded end to end. Each rod is 0.81 m long and has square side length of 3/8 inch on the ends. The combination is subjected to a tensile force with magnitude 4500 N. Part A For the steel rod, what is the elongation? Part B For the copper rod, what is the elongation?
Calculate the ratio of the resistance of 14.0 m of aluminum wire 1.5 mm in diameter,...
Calculate the ratio of the resistance of 14.0 m of aluminum wire 1.5 mm in diameter, to 28.0 m of copper wire 2.9 mm in diameter. Assume electrical resistivity of aluminum is 2.65×10−8 Ω⋅m and electrical resistivity of copper is 1.68×10−8 Ω⋅m.
A 3.00 m long copper wire has a 1.20 m long section with a 1.60 mm...
A 3.00 m long copper wire has a 1.20 m long section with a 1.60 mm diameter and a 1.80 m long section with a 0.80 mm diameter. The electric current is 2.5 mA (milli Amps) in the 1.60 mm diameter section. The electrical resistivity of copper is 1.68 x 10^-8 Ω m. a) (10pts) What is the current density in the 1.60 mm diameter section? b) (10pts) What is the magnitude of the electric field in N / C...
Calculate the ratio of the resistance of 15.0 m of aluminum wire 2.3 mm in diameter,...
Calculate the ratio of the resistance of 15.0 m of aluminum wire 2.3 mm in diameter, to 26.0 m of copper wire 1.9 mm in diameter. The resistivity of copper is 1.68×10−8Ω⋅m and the resistivity of aluminum is 2.65×10−8Ω⋅m. Express your answer using two significant figures.
A heat-conducting rod, 0.90 m long and wrapped in insulation, is made of an aluminum section...
A heat-conducting rod, 0.90 m long and wrapped in insulation, is made of an aluminum section that is 0.20 m long and a copper section that is .70m long. Both sections have a cross-sectional area of .000040m2. The aluminum end and the copper end are maintained at temperatures of 30 degrees C and 230 degrees C respectively. The thermal conductivities of aluminum and copper are 205 W/m ∙ K (aluminum) and 385 W/m ∙ K (copper). What is the temperature...
A rod has a square cross section of (5 x 5) mm. length of the rod...
A rod has a square cross section of (5 x 5) mm. length of the rod is 120 cm. The allowable stress is 400 MPa. After applying the load (F), square section changes to (4.95 x 4.95) mm. 1. What is the type of the load (F), is it tension or compression? 2. What is the longitudinal strain in steel rod? 3. What is the modulus of elasticity of the material of the rod? 4. What is the value of...
Calculate the ratio of the resistance of 9.4 m of aluminum wire 2.0 mm in diameter,...
Calculate the ratio of the resistance of 9.4 m of aluminum wire 2.0 mm in diameter, to 15.7 m of copper wire 2.4 mm in diameter. RAl / RCu = 1.33 Incorrect: Your answer is incorrect.
a 21.00 m steel beam with 6.00 cm x 6.000 cm cross-section is supported at opposite...
a 21.00 m steel beam with 6.00 cm x 6.000 cm cross-section is supported at opposite ends by two wires of equal length but of different composition in diameter. One wire composed of copper has a diameter of .8500 mm The other wire is made of aluminum. If the steel beam remains perfectly level find the diameter of the aluminum wire
A 2 m long gauge 14 copper wire (diameter 1.624 mm, resistivity 1.72 × 10-8 Ωm)...
A 2 m long gauge 14 copper wire (diameter 1.624 mm, resistivity 1.72 × 10-8 Ωm) replaces a similar 2 m long copper wire but of gauge 20 (diameter 0.812 mm). The resistance of the new wire is then that of the original wire.
Find the ratio of the diameter of aluminum to copper wire, if they have the same...
Find the ratio of the diameter of aluminum to copper wire, if they have the same resistance per unit length (as they might in household wiring). The resistivity of Aluminum is 2.65 x 10-8 Ω m ; the resistivity of copper is 1.72 x 10-8 Ω m.