Question

A flywheel with a radius of 0.500 mm starts from rest and accelerates with a constant angular acceleration of 0.800 rad/s^2.

1) Compute the magnitude of the radial acceleration of a point on its rim after it has turned through 60.0.

2) Compute the magnitude of the radial acceleration of a point on its rim after it has turned through 120.0.

Answer #1

the radial acceleration is calculated after 60 degrees and 120 degrees.

After 60 degrees radial acceleration is 0.8376×10^-3 rad/s²

After 120 degrees radial acceleration is

1.67×10^-3 rad/s²

A flywheel with a radius of 0.500 m starts from rest and
accelerates with a constant angular acceleration of 0.800 rad/s2
.
1) Compute the magnitude of the resultant acceleration of a
point on its rim after it has turned through 60.0. (m/s^2)
2) Compute the magnitude of the resultant acceleration of a
point on its rim after it has turned through 120.0. (m/s^2)

A flywheel with a radius of 0.500 m starts from rest and
accelerates with a constant angular acceleration of 0.700 rad/s2
.
1.Compute the magnitude of the tangential acceleration of a
point on its rim at the start.
2.Compute the magnitude of the radial acceleration of a point on
its rim at the start.
3.Compute the magnitude of the tangential acceleration of a
point on its rim after it has turned through 60.0 ?.
4.Compute the magnitude of the radial...

A flywheel with a radius of 0.200 m starts from rest and
accelerates with a constant angular acceleration of 0.400 rad/s2
.
Compute the magnitude of the radial acceleration of a point on
its rim after it has turned through 60.0 ?.
Compute the magnitude of the tangential acceleration of a point
on its rim after it has turned through 120.0 ?.
Compute the magnitude of the radial acceleration of a point on
its rim after it has turned through...

A flywheel with a radius of 0.200 m starts from rest and
accelerates with a constant angular acceleration of 0.400 rad/s2
.
a)Compute the magnitude of the tangential acceleration of a
point on its rim at the start.
b)Compute the magnitude of the radial acceleration of a point on
its rim at the start.
--------------------
c) Compute the magnitude of the tangential acceleration of a
point on its rim after it has turned through 60.0 ∘.
d)Compute the magnitude of...

A flywheel with a radius of 0.700 m starts from rest and
accelerates with a constant angular acceleration of 0.500 rad/s2
.
A). Compute the magnitude of the resultant acceleration of a
point on its rim at the start
B). Compute the magnitude of the resultant acceleration of a
point on its rim after it has turned through 60.0 ∘.
C). Compute the magnitude of the resultant acceleration of a
point on its rim after it has turned through 120.0

A flywheel with a radius of 0.360 mm starts from rest and
accelerates with a constant angular acceleration of 0.610
rad/s2
Part A
Compute the magnitude of the tangential acceleration, the radial
acceleration, and the resultant acceleration of a point on its rim
at the start.
Enter your answers separated with commas.
Part B
Compute the magnitude of the tangential acceleration, the radial
acceleration, and the resultant acceleration of a point on its rim
after it has turned through 60.0...

A
flywheel with a radius of .340 m starts from rest and accelerates
with a constant angular acceleration of .730 rad/ s2.
A) compute the magnitude of the tangential acceleration, the
radial acceleration, and the resultant acceleration of a point on
its rim at the start.
B) compute the magnitude of the tangential acceleration, the
radial acceleration, and the resultant acceleration of a point on
its rim after it has turned through 60.0.
C) compute the magnitude of the tangential...

A gyroscope flywheel of radius 2.05 cm is accelerated from rest
at 14.1 rad/s2 until its angular speed is 2390 rev/min. (a) What is
the tangential acceleration of a point on the rim of the flywheel
during this spin-up process? (b) What is the radial acceleration of
this point when the flywheel is spinning at full speed? (c) Through
what distance does a point on the rim move during the spin-up?

A gyroscope flywheel of radius 1.52 cm is accelerated from rest
at 19.7 rad/s2 until its angular speed is 1770 rev/min. (a) What is
the tangential acceleration of a point on the rim of the flywheel
during this spin-up process? (b) What is the radial acceleration of
this point when the flywheel is spinning at full speed? (c) Through
what distance does a point on the rim move during the spin-up

A cylinder rotating about its axis with a constant angular
acceleration of 1.6 rad/s^2 starts from rest at t=0. At the instant
when it has turned through 0.40 radian, find the magnitude of the
tangential velocity at point on the rim (radius=0.15 m)?

ADVERTISEMENT

Get Answers For Free

Most questions answered within 1 hours.

ADVERTISEMENT

asked 21 minutes ago

asked 46 minutes ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 2 hours ago

asked 2 hours ago

asked 2 hours ago

asked 4 hours ago

asked 5 hours ago