Question
A uniform grindstone wheel, in the shape of a solid disk, has mass 9.00kg and radius...
A uniform grindstone wheel, in the shape of a solid disk, has mass 9.00kg and radius 10.0cm.
a) Calculate the rotational kinetic energy of the grindstone as it turns at 30.0revs/second.
Immediately after the motor for the grindstone is turned off, a knife blade is pressed against the outer edge of the grindstone. The knife blade is pressed perpendicular to the grindstone with a force of 10.0N. The coefficient of friction between the blade and stone is 0.800.
b) Determine the torque on the flywheel due to the blade.
c) Determine the angular acceleration on the wheel once the blade is pressed against it.
d) Determine the angular velocity at 6.00 seconds. [81.8rads/s]
e) Determine the number of revolutions through which the wheel passes at 6.00 seconds
Homework Answers
Answer #1
Not the answer you're looking for?
Similar Questions
A grindstone of mass m = 50.0 kg is a solid disk 0.480 m in diameter....
A grindstone of mass m = 50.0 kg is a solid disk 0.480 m in
diameter. You press an ax down on the rim with a normal force of F
= 155 N The coefficient of kinetic friction between the blade and
the stone is 0.50, and there is a constant friction torque of 6.5
Nm between the axle of the stone and its bearings.
(a) While you are pressing the ax against the rim, how much
force would your...
A potter's wheel is a disk that has a mass of 5.0 kg and a radius...
A potter's wheel is a disk that has a mass of 5.0 kg and a
radius of 0.5 m. When turned on, a motor spins up the wheel with a
constant torque of 7.0 N·m for 10.0 seconds. Note: the moment of
inertia of a solid disk is given by 1/2 MR2. Also, there
is no translational motion, the wheel simply spins in place.
a. [8 pts.] Find the wheel's angular acceleration in
radians/sec2 during these 10 s.
b. [8...
You have a horizontal grindstone (a disk) that is 86 kg, has a 0.38 m radius,...
You have a horizontal grindstone (a disk) that is 86 kg, has a
0.38 m radius, is turning at 88 rpm (in the positive direction),
and you press a steel axe against the edge with a force of 18 N in
the radial direction.
Assuming that the kinetic coefficient of friction between steel
and stone is 0.20, calculate the angular acceleration of the
grindstone in rad/s2.
What is the number of turns, N, that the stone will make before
coming...
A grinding wheel is in the form of a uniform solid disk of radius 6.95 cm...
A grinding wheel is in the form of a uniform solid disk of
radius 6.95 cm and mass 1.91 kg. It starts from rest and
accelerates uniformly under the action of the constant torque of
0.591 N · m that the motor exerts on the wheel.
(a) How long does the wheel take to reach its final operating
speed of 1 240 rev/min?
s
(b) Through how many revolutions does it turn while
accelerating?
A flywheel within large water pump is a solid disk with mass 21 kg and a...
A flywheel within large water pump is a solid disk with mass 21
kg and a radius of 0.45 m. Starting from rest it begins to rotate
with a constant acceleration of 2.4 rad/sec2 for 5.1 sec after
which it rotates at a constant rate.
1) What is the moment of interia of the flywheel?
2) After 5.1 seconds, what is it's angular speed?
3) Though what angle has it rotated in those 5.1 seconds?
4) How many revolutions has...
A grinding wheel is in the form of a uniform solid disk of radius 7.07 cm...
A grinding wheel is in the form of a uniform solid disk of
radius 7.07 cm and mass 2.06 kg. It starts from rest and
accelerates uniformly under the action of the constant torque of
0.590 N · m that the motor exerts on the wheel.
(a) How long does the wheel take to reach its final operating
speed of 1 220 rev/min?
s
(b) Through how many revolutions does it turn while
accelerating?
rev
A grinding wheel is in the form of a uniform solid disk of radius 7.07 cm...
A grinding wheel is in the form of a uniform solid disk of
radius 7.07 cm and mass 1.97 kg. It starts from rest and
accelerates uniformly under the action of the constant torque of
0.594 N · m that the motor exerts on the wheel.
(a) How long does the wheel take to reach its final operating
speed of 1 150 rev/min? ___s
(b) Through how many revolutions does it turn while accelerating?
___ rev
A grinding wheel is in the form of a uniform solid disk of radius 6.99 cm...
A grinding wheel is in the form of a uniform solid disk of
radius 6.99 cm and mass 1.93 kg. It starts from rest and
accelerates uniformly under the action of the constant torque of
0.594 N · m that the motor exerts on the wheel.
(a) How long does the wheel take to reach its final operating
speed of 1 100 rev/min?
______________s
(b) Through how many revolutions does it turn while
accelerating?
___________rev
A flywheel within large water pump is a solid disk with mass 23.5 kg and a...
A flywheel within large water pump is a solid disk with mass
23.5 kg and a radius of 0.36 m. Starting from rest it begins to
rotate with a constant acceleration of 2.5 rad/sec2 for 5.9 sec
after which it rotates at a constant rate. 1) What is the moment of
interia of the flywheel? kg-m2 Submit 2) After 5.9 seconds, what is
it's angular speed? rad/sec Submit 3) Though what angle has it
rotated in those 5.9 seconds? rad...
A potter’s wheel, a thick stone disk of radius 0.500 m and mass 100 kg, is...
A potter’s wheel, a thick stone disk of radius 0.500 m and mass
100 kg, is freely rotating at 70.0 rev/min. The potter can stop the
wheel by pressing a wet rag against the rim and exerting a radially
inward force of 35.0 N. If the applied force slows the wheel down
with an angular acceleration of 0.875rad/s2 , calculate the torque
acting on the wheel and the coefficient of kinetic friction between
the wheel and the rag
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
ADVERTISEMENT
Active Questions
asked 7 minutes ago
asked 7 minutes ago
asked 17 minutes ago
asked 19 minutes ago
asked 24 minutes ago
asked 42 minutes ago
asked 45 minutes ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago