Question

If 71 cd of intensity are transmitted through a piece of glass that is 6.8 mm...

If 71 cd of intensity are transmitted through a piece of glass that is 6.8 mm thick, what intensity was the incident light, in cd? Assume the reflectivity is 0.041 and the absorption coefficient is 0.22 mm-1. (Answer format X)

Homework Answers

Answer #1

concept - if I0 is the incident intensity and I is the transmitted intansity than accroding to BEER - LAMBERT law

  • where k= absorption coefficient

Solution - in question it is given thst

I = 71

x = 6.8 mm

k= 0.22 mm-1

I0 = ?

putting all the above value in the formula gives

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Refraction through flat glass. Light travelling in air strikes a flat piece of uniformly thick glass...
Refraction through flat glass. Light travelling in air strikes a flat piece of uniformly thick glass at an incident angle of 60.0°, as shown. If the index of refraction of the glass is 1.50, (a) what is the angle of refraction θA in the glass; (b) what is the angle θB at which the ray emerges from the glass?
Find the final transmitted intensity (as a percentage of the incident intensity) for unpolarized light passing...
Find the final transmitted intensity (as a percentage of the incident intensity) for unpolarized light passing through two polarizers 90° apart.   Do it again for three polarizers 45° apart from each other. For 9 polarizers all 10° apart. I want to rotate an incident light beam by 90°.  I'll do it by using 181 polarizers in a chain, all separated by 1/2°.   Repeat the calculation for initially unpolarized light and tell me the final transmission intensity. What if instead I used...
31. A beam of light is incident upon a flat piece of glass (n = 1.50)...
31. A beam of light is incident upon a flat piece of glass (n = 1.50) at an angle of incidence of 37.2°. Part of the beam is transmitted and part is reflected. What is the angle between the reflected and transmitted rays? answer 119° 29. A light ray passes from air through a thin plastic slab (n = 1.77) with parallel sides. If the ray in air makes an angle of 49° with the normal after leaving the slab,...
Introduction to Engineering Materials Question: A beam of light hits a 2.48cm thick silicate glass plate...
Introduction to Engineering Materials Question: A beam of light hits a 2.48cm thick silicate glass plate at an angle of 74 degrees (as measured from the normal to the surface of the glass). If the coefficient of linear absorption is 0.027 cm-1 and the index of refraction is 1.488, what fraction of light is passed through the plate. The answer should have three decimals of accuracy. The answer is: 0.847, I need to know the process.
if 1.0 mm diameter argon ion laser beam 514.5nm propagation through the air at reflective index...
if 1.0 mm diameter argon ion laser beam 514.5nm propagation through the air at reflective index n =1.000 passes through a series of three 10.0mm thick pieces of SI-UV suprasil fused silica reflective index (n= 1.46156) at normal incidence , what is the intensity of the beam that exits the attenuator? suppose that the intensity of light passing through this attenuator is used a measurment of p0 for absorption experment . if two of three quartiz flats are mistakenly replaced...
a) Unpolarized light is sent through two polarizers. Its initial intensity is 35 W/m2, and the...
a) Unpolarized light is sent through two polarizers. Its initial intensity is 35 W/m2, and the polarizing axes are at angles θ1 = 76° and θ2 = 90°, both relative to a common y axis. After passing through both polarizers, what is the intensity of the light? Express your answer in W/m2. b) Consider three materials with parallel interfaces. The first has n = 1.04, and the second has n = 1.60. A ray of light in the first medium...
Consider a beam of light passing through a 1 cm cuvette containing 1mg/liter of a light...
Consider a beam of light passing through a 1 cm cuvette containing 1mg/liter of a light absorbing compound. Suppose 20% of the incident light is absorbed. Now place a second identical cuvette in the light path directly behind the first cuvette. What is the intensity of the light transmitted through both cuvettes – you can answer in percentage amount of light.
A ray of light strikes a flat glass block at an incidence angle of θ1 =...
A ray of light strikes a flat glass block at an incidence angle of θ1 = 34.2°. The glass is 2.00 cm thick and has an index of refraction that equals ng = 1.76. PICTURE: A light ray incident on a glass block of thickness 2.00 cm is shown. The ray travels down and to the right and is incident to the top of the block at an angle θ1 to the normal of the surface. The ray inside the...
Magnesium fluoride anti-reflective coating on glass To reduce reflection, eyeglass manufacturers apply anti-reflection coatings on the...
Magnesium fluoride anti-reflective coating on glass To reduce reflection, eyeglass manufacturers apply anti-reflection coatings on the lenses. A typical coating material is magnesium fluoride with a thermal expansion coefficient of 11.6 x 10?6 K-1. Optical glass has a thermal expansion coefficient of 7.6 x 10?6 K-1. Manufacturers deposit magnesium fluoride onto glass through a vacuum deposition method whereby they heat the substrate to about 325 ?C. The Young modulus and Poisson ration of magnesium oxide are 138 GPa and 0.27....
A doctor examines a mole with a 15.1 cm focal length magnifying glass held 11.4 cm...
A doctor examines a mole with a 15.1 cm focal length magnifying glass held 11.4 cm from the mole How big is the image in millimeters if the mole is actually 4.2 mm in diameter? What is the focal length of 2.4 D reading glasses found on the rack in a pharmacy? How far, in centimeters from the lens must the film in a camera be, if the lens has a 36.3 mm focal length and is being used to...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT