Question

A 171.4 kg uniform, horizontal beam is hinged at one end and at the other is...

A 171.4 kg uniform, horizontal beam is hinged at one end and at the other is supported by a cable that is at 27 degrees to the left of the vertical. The beam is 3.98 m long. Calculate the direction of the force at the hinge (measured with respect to the horizontal). Answer with a number in degrees.

Science   Physics   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A 209.8 kg uniform, horizontal beam is hinged at one end and at the other is...
A 209.8 kg uniform, horizontal beam is hinged at one end and at the other is supported by a cable that is at 23 degrees to the vertical. The beam is 2.39 m long. Calculate the magnitude of the force (in N) at the hinge.
A 110 kg uniform beam is attached to a vertical wall at one end and is...
A 110 kg uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. Calculate the magnitude of the vertical component of the force that the wall exerts on the left end of the beam if the angle between the cable and horizontal is θ = 39°.
In the figure, a uniform beam with a weight of 56.9 N and a length of...
In the figure, a uniform beam with a weight of 56.9 N and a length of 3.75 m is hinged at its lower end, and a horizontal force  of magnitude 58.2 N acts at its upper end. The beam is held vertical by a cable that makes angle θ = 20.8° with the ground and is attached to the beam at height h = 2.04 m. What are (a) the tension in the cable, (b) the x-component of the force on...
A uniform steel beam (mass 43.7 kg, length 9.79 m) is hinged at one end to...
A uniform steel beam (mass 43.7 kg, length 9.79 m) is hinged at one end to a wall and has two wires attached at the other end. Wire 1 (length 4.67 m) is horizontal and is attached to the wall, and wire 2 is vertical and is attached to the floor If the system is in equilibrium and the tension in wire 2 is 130 N, find the magnitude of the tension in wire 1, in N.        
A 560-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a...
A 560-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal, 6.00-m-long, uniform, 120-N rod as indicated in the figure below. The left end of the rod is supported by a hinge and the right end is supported by a thin cable making a 30.0° angle with the vertical. (Assume the cable is connected to the very end of the 6.00-m-long rod, and that there are 2.00 m separating the wall from the sign.)...
You decide to hang another plant from a 1.5-m-long 2.9-kg beam that is attached by a...
You decide to hang another plant from a 1.5-m-long 2.9-kg beam that is attached by a hinge to the wall on the left. You orient the beam at a 38 ∘ angle above the horizontal and orient the cable horizontally from the wall to the end of the beam. The beam holds the 2.9-kg pot and plant hanging 0.1 m from its end. Determine the force that the cable exerts on the beam. Determine the force that the wall hinge...
A man with mass 80 kg begins walking out to the end of a 5 m...
A man with mass 80 kg begins walking out to the end of a 5 m long beam that is supported by a hinge attached to a building at one end and a cable that makes a 30° to the horizontal at the other end. This cable can withstand 2000N of tension until it breaks. a) How far can the man walk before the cable breaks? b) Just when the cable snaps, what is the angular velocity? Assume the only...
You decide to hang another plant from a1.5-m-long 2.3-kg beam that is attached by a hinge...
You decide to hang another plant from a1.5-m-long 2.3-kg beam that is attached by a hinge to the wall on the left. You orient the beam at a 39 ∘ angle above the horizontal and orient the cable horizontally from the wall to the end of the beam. The beam holds the 2.3-kg pot and plant hanging 0.1 m from its end. A). Determine the force that the cable exerts on the beam. B).Determine the force that the wall hinge...
A uniform beam, 2.00 m long with a mass of 20.0 kg, is mounted to a...
A uniform beam, 2.00 m long with a mass of 20.0 kg, is mounted to a wall with a hinge. The beam is held out horizontally by a steel cable, 5 mm in diameter, that makes a 30-degree angle with the beam. The beam will hold up a sign that will hang off its end. See the diagram below A.Using a safety factor of 5, what is the maximum tension the steel cable can provide? B.Given the free-body diagram as...
Figure shows a safe (M = 430 kg) hanging by a rope (negligible mass) from a...
Figure shows a safe (M = 430 kg) hanging by a rope (negligible mass) from a boom (a = 1.9 m and b = 2.5 m) that consists of a uniform hinged beam (m = 85 kg) and horizontal cable (negligible mass). a) What is the tension in the cable? In other words, what is the magnitude of the tension force on the beam from the cable? b) Find the magnitude of the net force on the beam from the...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT