Question

Determine the amount of energy stored in the capacitor that you used in the experiment when...

Determine the amount of energy stored in the capacitor that you used in the experiment when it is fully charged. Describe how that energy is put into the capacitor and how it is discharged from it. (i.e. describe energy flow, source and where does it go) Also determine the size of the plates and their spacing if your capacitor was an ‘air’ capacitor (i.e. only air between the plate).

Homework Answers

Answer #1

please rate it up thanks :)

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A parallel-plate capacitor has capacitance 7.00 μF. (a) How much energy is stored in the capacitor...
A parallel-plate capacitor has capacitance 7.00 μF. (a) How much energy is stored in the capacitor if it is connected to a 4.00-V battery? μJ (b) If the battery is disconnected and the distance between the charged plates doubled, what is the energy stored? μJ (c) The battery is subsequently reattached to the capacitor, but the plate separation remains as in part (b). How much energy is stored? μJ
A parallel-plate capacitor has capacitance 7.00 μF. (a) How much energy is stored in the capacitor...
A parallel-plate capacitor has capacitance 7.00 μF. (a) How much energy is stored in the capacitor if it is connected to a 11.00-V battery (μJ)? (b) If the battery is disconnected and the distance between the charged plates doubled, what is the energy stored (μJ)? (c) The battery is subsequently reattached to the capacitor, but the plate separation remains as in part (b). How much energy is stored (μJ)?
A parallel plate capacitor in air is constructed with a plate area of 7.75cm2 and a...
A parallel plate capacitor in air is constructed with a plate area of 7.75cm2 and a plate separation of 0.664mm. A) Determine the value of the capacitance of this parallel plate capacitor. B) This capacitor is placed across a 21.0 V battery and allowed to fully charge. What is the value of this charge with included units. C) When fully charged, what is the energy stored inside the capacitor? D) With the battery still connected, a pyrex glass dielectric material...
In a Physics experiment, the Energy stored in a capacitor is transformed in heat and used...
In a Physics experiment, the Energy stored in a capacitor is transformed in heat and used to bring a Copper made wire from the room temperature ?? = ?? ℃, up to its melting point, at ???????? = ???? ℃. The Copper wire has a mass of 3 grams, while the specific heat capacity of Copper is ??????? = ??? ?/??℃. Knowing that the maximum Voltage the Capacitor used in the experiment can sustain is 15 V, what is the...
A camera flash gets its energy from a 150 μF capacitor and requires 170 V to...
A camera flash gets its energy from a 150 μF capacitor and requires 170 V to fire. a) If the capacitor is charged by a 200 V source through an 18 kΩ resistor, how long must the photographer wait between flashes? (Assume the capacitor is fully discharged with each flash.) b) Of the total energy drawn from a battery in charging an RC circuit, show that only half ends up as stored energy in the capacitor. Hint: What happens to...
The hospital you work for uses a defibrillator that has a single capacitor with a capacitance...
The hospital you work for uses a defibrillator that has a single capacitor with a capacitance of 10-6 F. When it is about to be used, the defibrillator is charged to a voltage of 4000 V. a) How much charge is stored on the defibrillator ‘s capacitor when it has been fully charged? b) If you were to connect an additional 3 x 10-6 F capacitor in parallel with the original 10-6 F capacitor in the defibrillator, what would be...
You have a parallel-plate capacitor made of two square metal plates. The sides of each plate...
You have a parallel-plate capacitor made of two square metal plates. The sides of each plate is 10 cm and they are separated by a distance of 5 mm. (a) What is the capacitance of this capacitor? (b) You insert a thin quartz sheet into the space between the plates so that it take sup the entire space between the plates. What is the capacitance of the capacitor now? (c) You put this capacitor with the dielectric inserted into a...
A 165 μF capacitor is used in a circuit. How much energy, in joules, is stored...
A 165 μF capacitor is used in a circuit. How much energy, in joules, is stored in it when 117 V is applied? & A nervous physicist worries that the two metal shelves of his wood frame bookcase might obtain a high voltage difference if charged by static electricity, perhaps produced by friction. What is the capacitance of the empty shelves if they have area 1.4 × 103 cm2 and are 0.22 m apart in F? What is the potential...
A parallel-plate capacitor is constructed of plates with area 2.5 m2 that are separated by 0.5...
A parallel-plate capacitor is constructed of plates with area 2.5 m2 that are separated by 0.5 mm of air (dielectric constant Ka = 1:0006). The capacitor is connected to a 9 V battery and fully charged. The battery is then disconnected, and quartz is inserted to ll the gap between the plates (dielectric constant Kq = 4:3). Determine whether the energy density of this capacitor increased or decreased when the quartz was inserted, and by how much.
A parallel-plate capacitor is charged and then disconnected from a battery. Then, the plate separation is...
A parallel-plate capacitor is charged and then disconnected from a battery. Then, the plate separation is decreased by a factor of 4, d_new=1/4 d_old, please type in a number into the box to determine how everything changes. (If something doesn't change, please type in 1 to answer X_new= 1 X_old.) (a) By what fraction does the capacitance change? C_new=  C_old; (b) By what fraction does the amount of charge change? Q_new=  Q_old (When the battery is disconnected, the charges have no place...