Question

A hydraulic lift has 2 connected pistons with cross-sectional areas 20 cm2 and 680 cm2. It...

A hydraulic lift has 2 connected pistons with cross-sectional areas 20 cm2 and 680 cm2. It is filled with oil of density 710 kg/m3.

  1. What mass must be placed on the small piston to support a car of mass 1400 kg at equal fluid levels?

m =

  1. With the lift in balance with equal fluid levels, a person of mass 90 kg gets into the car. What is the equilibrium height difference in the fluid levels in the pistons?

Δh =

  1. How much did the height of the car drop when the person got in the car?

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A 1225-kg car is raised using a hydraulic lift, which consists of a U-tube with arms...
A 1225-kg car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil with a density of 800. kg/m3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The wider piston is raised to a position that...
A simple hydraulic press is filled with pure water (ρwater = 1.0 g/cm3) and has the...
A simple hydraulic press is filled with pure water (ρwater = 1.0 g/cm3) and has the pistons of 280 cm2 and 50 cm2 areas each. Initially the pistons are balanced out, then a 65-kg load is placed on the bigger piston so it moves down until a new equilibrium is reached. To what height relative to it's initial level the small piston will rise? The height of the small piston, h =   What mass should be placed on the small...
(a) (2 marks) A 2000-kg car is lifted to a height h by a hydraulic lift...
(a) A 2000-kg car is lifted to a height h by a hydraulic lift containing an incompressible fluid. A force of F1 applied on a piston of area A1 results in a larger force of F2 on the plunger of larger area A2 . Suppose the piston has a radius of 0.0120 m and the plunger’s radius is 0.750 m. Calculate the height to which the car is lifted if the work done by the plunger is 200 J. (Assume...
A) A 1500-kg car is lifted to a height h by a hydraulic lift containing an...
A) A 1500-kg car is lifted to a height h by a hydraulic lift containing an incompressible fluid. A force of F_1 applied on a piston of area A_1 results in a larger force of F_2 on the plunger of larger area A_2. Suppose the piston has a radius of 0.0120 m and the plunger’s radius is 0.150 m. Calculate the height to which the car is lifted if the work done by the plunger is 200 J. (Assume that...
1. A hydraulic lift uses a compressor to compress the hydraulic fluid with a moving piston...
1. A hydraulic lift uses a compressor to compress the hydraulic fluid with a moving piston (piston A) of radius RA = 4.83 cm. A second piston (piston B) of radius RB = 18.48 cm is used at the lift to lift cars. What force must be applied by piston A to lift a 14,871N car with piston B? 2. When a 0.438 kg mass is hung from a certain spring it stretches 0.119 m to its equilibrium position at...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT