Question

Voltage V = V0sin (ωt) is applied to the LRC series circuit, where V0 = 0.85...

Voltage V = V0sin (ωt) is applied to the LRC series circuit, where V0 = 0.85 V, ω = 7541 (1/s) and t is the time in seconds. In the circuit L = 20.0 mH, R = 22.7 kΩ and C = 0.42 μF.

a) Determine the impedance and phase difference of the circuit.
b) What is the effective power of the circuit?
c) What are the effective currents and effective voltages for each component?
 

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
An LRC series circuit with R = 120 Ω , L = 40 mH , and...
An LRC series circuit with R = 120 Ω , L = 40 mH , and C = 1.5 μF is powered by an ac voltage source of peak voltage V0 = 230 V and frequency f = 440 Hz. Determine the peak voltage across L. Determine the phase angle of the voltage across L relative to the source voltage Determine the peak voltage across C. Determine the phase angle of the voltage across C relative to the source voltage.
An LRC series circuit has with R = 105 Ω, L = 76 mH, and C...
An LRC series circuit has with R = 105 Ω, L = 76 mH, and C = 22 μF, is attached to a 120-V (rms) AC power supply with frequency 60 Hz. (a) What is the impedance of the circuit? (b) What is the peak current in the circuit? (c) What is the peak voltage across the resistor? (d) What is the peak voltage across the inductor? (e) What is the peak voltage across the capacitor? (f) What is the...
In an LRC series circuit, the inductance is 244 mH, the resistance is 29 Ω, and...
In an LRC series circuit, the inductance is 244 mH, the resistance is 29 Ω, and the capacitance is 354 μF. If the AC voltage applied across the circuit is given by V(t) = (12 V)sin(11πt) calculate the voltage across each element at a time of t = 0.04 s. VR = V VC = V VL = V
An AC voltage of the form Δv = (110.0 V)sin(330t) is applied to a series RLC...
An AC voltage of the form Δv = (110.0 V)sin(330t) is applied to a series RLC circuit. If R = 32.0 Ω, C = 28.0 μF, and L = 0.220 H, find the following. (a) impedance of the circuit Ω (b) rms current in the circuit A (c) average power delivered to the circuit W.
Consider an RLC circuit in series. In the circuit the AC source has an rms voltage...
Consider an RLC circuit in series. In the circuit the AC source has an rms voltage of 10 V and frequency of 25 kHz. The inductor is 0.50 mH, the capacitor is 0.10 μF, and resistor is 5.0 Ω. a) Determine the impedance b) Determine the voltage across the inductor, capacitor and resistor. c) Determine the phase angle. d) Is the voltage leading or lagging the current?
In an LRC series circuit, the components have the following Values: L=0.4 H, C=600 μF, R=200...
In an LRC series circuit, the components have the following Values: L=0.4 H, C=600 μF, R=200 Ω, V=30 V and frequency 1.5 kHz. Calculate the impedance of the circuit Calculate the maximum voltage across the resistor, the inductor and the capacitor
A sinusoidal voltage V= 80.0 V sin (150t) is applied to a series RLC circuit with...
A sinusoidal voltage V= 80.0 V sin (150t) is applied to a series RLC circuit with L =80.0 mH, C= 125.0 µF, and = 40.0 Ω Find RMS value of current. Potential difference (rms) between A to B, B to C and B to D Average and maximum power at resonance. Is current leading or lagging the voltage? Explain.
1) In an LRC circuit, why does the sum of the voltages around the circuit not...
1) In an LRC circuit, why does the sum of the voltages around the circuit not equal the applied voltage as Kirchhoff’s rule requires? 2) Using L = 20 mH, C = 50 ?F and R = 15 ohms, calculate the resonant frequency of the series LRC circuit. Show your work in the space below. 3) Using the values from pre-lab question 2 and an applied voltage of 3.0 volts across the circuit, plot (on a separate sheet) the voltage...
A series AC circuit contains a resistor, an inductor of 210 mH, a capacitor of 5.50...
A series AC circuit contains a resistor, an inductor of 210 mH, a capacitor of 5.50 µF, and a source with ΔVmax = 240 V operating at 50.0 Hz. The maximum current in the circuit is 200 mA. (a) Calculate the inductive reactance. Ω (b) Calculate the capacitive reactance. Ω (c) Calculate the impedance. kΩ (d) Calculate the resistance in the circuit. kΩ (e) Calculate the phase angle between the current and the source voltage. °
A sinusoidal voltage Δv = 41.0 sin 100t, where Δv is in volts and t is...
A sinusoidal voltage Δv = 41.0 sin 100t, where Δv is in volts and t is in seconds, is applied to a series RLC circuit with L = 170 mH, C = 99.0 µF, and R = 65.0 Ω.(a) What is the impedance of the circuit? (b) What is the maximum current?(c) Determine the numerical value for ω in the equation i = Imax sin (ωt − ϕ).(d) Determine the numerical value for ϕ in the equation i = Imax...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT