Question

A long horizontal hose of diameter 3.6 cm is connected to a faucet. At the other...

A long horizontal hose of diameter 3.6 cm is connected to a faucet. At the other end, there is a nozzle of diameter 1.8 cm. Water squirts from the nozzle at velocity 16 m/sec. Assume that the water has no viscosity or other form of energy dissipation.

1)What is the velocity of the water in the hose ?

2)What is the pressure differential between the water in the hose and water in the nozzle ?

3) How long will it take to fill a tub of volume 150 liters with the hose ?

Science   Physics   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A long horizontal hose of diameter 3.8 cm is connected to a faucet. At the other...
A long horizontal hose of diameter 3.8 cm is connected to a faucet. At the other end, there is a nozzle of diameter 1 cm. Water squirts from the nozzle at velocity 18 m/sec. Assume that the water has no viscosity or other form of energy dissipation. 1) What is the velocity of the water in the hose ? m/s 2) What is the pressure differential between the water in the hose and water in the nozzle ? Pa 3)...
A 2.54 cm inner diameter hose is connected to a freshwater pump with a gauge pressure...
A 2.54 cm inner diameter hose is connected to a freshwater pump with a gauge pressure of 3.65 atm. The volume flow rate at the pump is 2.50 gal/min. The other end of the hose is held at an angle of 300 above the horizontal at a height of 1.20 m. Determine the velocity of the water as it exits the hose. Determine the inner diameter of the hose as the water exits the hose. Determine the horizontal distance from...
The hose has a diameter of 2.5 cm, but the nozzle has a diameter of only...
The hose has a diameter of 2.5 cm, but the nozzle has a diameter of only 1.10 cm. The water that comes out of the hose fills a container of 25 Len 1.50 min. Calculate: a- the volume flow flowing through the hose b- the velocity of the water leaving the nozzle c- if the pressure external to the hose is atmospheric, what is the absolute pressure of the water inside the hose?
A straight horizontal garden hose 49.0 m long with an interior diameter of 1.30 cm) is...
A straight horizontal garden hose 49.0 m long with an interior diameter of 1.30 cm) is used to deliver 20C water at the rate of 0.490 liters/s. Assuming that Poiseuille's Law applies, estimate the pressure drop (in Pa) from one end of the hose to the other.
A hose for firefighters has an inner diameter of 8.0 cm. The pressure inside the hose...
A hose for firefighters has an inner diameter of 8.0 cm. The pressure inside the hose is 380 kPa higher than the air pressure. The nozzle at the end of the hose has an inner diameter of 3.50 cm. a) What is the velocity with which the water leaves the nozzle? b) How many liter water per second leaves the hose? Use 1.00·10^3 kg/m3 as density for water
The water enters the two-story building through a horizontal pipe with an inner diameter 4 cm...
The water enters the two-story building through a horizontal pipe with an inner diameter 4 cm and the pressure of 10 atm. The velocity of the water flow in the pipe is 5 m/s. The horizontal pipe is connected to a vertical pipe which leads to bathrooms in each story. a) What is the velocity of the water flow in the vertical pipe if the diameter of the pipe is 2 cm. b) What is the pressure in the pipe...
Steam enters a long, horizontal pipe with an inlet diameter of d1 = 16 cm at...
Steam enters a long, horizontal pipe with an inlet diameter of d1 = 16 cm at 2 MPa and 300 degrees Celsius with a velocity of 2.5 m/s. Farther downstream, the conditions are 1.8 MPa and 250 degrees Celsius, and the diameter is d2 = 14 cm. Determine (a) the mass flow rate of the steam and (b) the rate of heat transfer.
1- Water flows in a 10 m long and 4 cm diameter pipe contains 4 elbows...
1- Water flows in a 10 m long and 4 cm diameter pipe contains 4 elbows ( KL= 0.2 ) at velocity 8 m/s. Calculate the total head losses when the friction factor f=0.03 35.56 m 22.07 m 27.07 m 15.46 m 2- water flows in a 10 m long and 5 cm diameter horizontal pipe at rate 15 l/s Calculate the pressure drop Take the density of water 1000 kg/m3 and the dynamic viscosity 0.001 kg/m.s 74.13 kPa 96.41...
Assume frictionless flow in a long horizontal conical pipe. The diameter is 12 inches at one...
Assume frictionless flow in a long horizontal conical pipe. The diameter is 12 inches at one end and 6 inches at the other, The pressure head at the smaller end is 16 feet of water, if water flows through this cone from the larger to the smaller end at a rate of 150 gallons per minute (gpm) calculate the fluid velocities at the two ends and the pressure head at the larger end. Draw a picture of the problem and...
. Suppose a vertical pipe is to be used as part of a system to manually...
. Suppose a vertical pipe is to be used as part of a system to manually cycle nutrients upward from the floor of a lake. (Many lakes do this naturally, some do not. Green Lake, near Syracuse, NY, is one such lake.) A pump is to be installed on the lake floor at the base of the pipe. The base of the pipe will have a diameter of 9 cm. The nozzle of the pipe at the top will have...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT