Question
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe...
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe is 1.8 cm, and the radius of the nozzle is 0.51 cm. The speed of the water in the pipe is 0.70 m/s. Treat the water as an ideal fluid, and determine the absolute pressure of the water in the pipe.
Homework Answers
Answer #1
Not the answer you're looking for?
Similar Questions
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe...
Water flowing out of a horizontal pipe emerges through a nozzle.
The radius of the pipe is 2.3 cm, and the radius of the nozzle is
0.41 cm. The speed of the water in the pipe is 0.74 m/s. Treat the
water as an ideal fluid, and determine the absolute pressure of the
water in the pipe.
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe...
Water flowing out of a horizontal pipe emerges through a nozzle.
The radius of the pipe is 1.5 cm, and the radius of the nozzle is
0.55 cm. The speed of the water in the pipe is 0.65 m/s. Treat the
water as an ideal fluid, and determine the absolute pressure of the
water in the pipe.
In a section of horizontal pipe with a diameter of 4.0 cm, the pressure is 115...
In a section of horizontal pipe with a diameter of 4.0 cm, the
pressure is 115 kPa and water is flowing with a speed of 1.5 m/s.
The pipe narrows to a 3.0-cm diameter. What is the pressure in kPa
in the narrower region? Treat the water as an ideal incompressible
fluid.
Water is flowing into a factory in a horizontal pipe with a radius of 0.0163 m...
Water is flowing into a factory in a horizontal pipe with a
radius of 0.0163 m at ground level. This pipe is then connected to
another horizontal pipe with a radius of 0.0380 m on a floor of the
factory that is 11.6 m higher. The connection is made with a
vertical section of pipe and an expansion joint. Determine the
volume flow rate that will keep the pressure in the two horizontal
pipes the same.
_________ m3/s
Water is flowing into a factory in a horizontal pipe with a radius of 0.0183 m...
Water is flowing into a factory in a horizontal pipe with a
radius of 0.0183 m at ground level. This pipe is then connected to
another horizontal pipe with a radius of 0.0300 m on a floor of the
factory that is 11.6 m higher. The connection is made with a
vertical section of pipe and an expansion joint. Determine the
volume flow rate that will keep the pressure in the two horizontal
pipes the same.
In a section of horizontal pipe with a diameter of 5.00 cm the pressure is 6.52...
In
a section of horizontal pipe with a diameter of 5.00 cm the
pressure is 6.52 kPa and water is flowing at a speed of 1.70 m/s.
Then it narrows to 2.70 cm. What is the pressure in the narrow
region if water behaves as an ideal fluid?
In the figure, water flows through a horizontal pipe and then out into the atmosphere at...
In the figure, water flows through a horizontal pipe and then
out into the atmosphere at a speed v1 = 16.0
m/s. The diameters of the left and right sections of the pipe are
4.70 cm and 3.20 cm. (a) What volume of water
flows into the atmosphere during a 10 min period? In the left
section of the pipe, what are (b) the speed
v2 and (c) the gauge
pressure?
In the figure, water flows through a horizontal pipe and then out into the atmosphere at...
In the figure, water flows through a horizontal pipe and then
out into the atmosphere at a speed v1 = 15.0 m/s. The diameters of
the left and right sections of the pipe are 4.70 cm and 3.20 cm.
(a) What volume of water flows into the atmosphere during a 10 min
period? In the left section of the pipe, what are (b) the speed v2
and (c) the gauge pressure?
The pressure of water flowing through a 6.3×10?2 ?m -radius pipe at a speed of 1.1...
The pressure of water flowing through a 6.3×10?2 ?m
-radius pipe at a speed of 1.1 m/s is 2.2 ×105 N/m2.
(a) What is the flow rate of water?
(b) What is the pressure in the water after it goes up a 4.6 ?m
-high hill and flows in a 5.0×10?2 ?m-radius pipe?
There is a pipe with a radius of 47 cm. Water is flowing thorugh this pipe...
There is a pipe with a radius of 47 cm. Water is flowing thorugh
this pipe and ends up 4.7 m below the starting point with a radius
of 83 cm. The water enters at the starting point with a velcity of
4.9 m/s. What is the pressure difference between the starting point
and endpoint of the pipe assuming that the density of water is 1000
kg/m^3.
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
ADVERTISEMENT
Active Questions
asked 5 minutes ago
asked 7 minutes ago
asked 21 minutes ago
asked 36 minutes ago
asked 37 minutes ago
asked 39 minutes ago
asked 47 minutes ago
asked 51 minutes ago
asked 55 minutes ago
asked 56 minutes ago
asked 59 minutes ago
asked 1 hour ago