Question

An incompressible fluid is flowing through a pipe with a constriction. The pipe is on an...

An incompressible fluid is flowing through a pipe with a constriction. The pipe is on an incline with an angle of 30.0 degrees. The narrow section is 15.0 m from the wide section and the narrow section is lower than the wide section. The velocity of the fluid in the wide section of the pipe is 4.00 m/s and the velocity of the fluid in the narrow section of pipe is 9.00 m/s. The pressure of the fluid in the wide section is 250 kPa. What is the pressure in the narrow section of the pipe? (density of the fluid is 1,000 kg/m3)

Multiple Choice

  • 301 kPa

  • 291 kPa

  • 260 kPa

  • 320 kPa

  • 275 kPa

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Oil is flowing through a horizontal pipe constriction. In the large section, the pipe has a...
Oil is flowing through a horizontal pipe constriction. In the large section, the pipe has a diameter of 1.7 meters and a pressure of 500 kPa. If the pipe constricts to a diameter of 0.5 meters, what is the pressure in the constricted pipe section. (Assume the oil flow rate is 65 m3/min and oil density is 900 kg/m3) 49,432.419 kPa 13.096115 kPa 486.403885 kPa 513.801133 kPa 2. Oil is flowing through a horizontal pipe expansion. In the small section,...
Oil is flowing through a horizontal pipe constriction. In the large section, the pipe has a...
Oil is flowing through a horizontal pipe constriction. In the large section, the pipe has a diameter of 1.9 meters and a pressure of 900 kPa. If the pipe constricts to a diameter of 0.4 meters, what is the pressure in the constricted pipe section. (Assume the oil flow rate is 65 m3/min and oil density is 900 kg/m3) 933.509601 kPa 121,028.169 kPa 32.478208 kPa 866.621792 kPa
A fluid of constant density equal to 880 kg/m3 is flowing steadily through a contracting expanding...
A fluid of constant density equal to 880 kg/m3 is flowing steadily through a contracting expanding pipe. The diameters at the sections are d1= 125 mm and d2 = 75 mm. The gauge pressure at the first section is P1 = 220 kN/m3 and the velocity is 4.25 m/s. What is the velocity at the second section? what is the gauge pressure at the second section?
In a section of horizontal pipe with a diameter of 4.0 cm, the pressure is 115...
In a section of horizontal pipe with a diameter of 4.0 cm, the pressure is 115 kPa and water is flowing with a speed of 1.5 m/s. The pipe narrows to a 3.0-cm diameter. What is the pressure in kPa in the narrower region? Treat the water as an ideal incompressible fluid.
In a section of horizontal pipe with a diameter of 5.00 cm the pressure is 6.52...
In a section of horizontal pipe with a diameter of 5.00 cm the pressure is 6.52 kPa and water is flowing at a speed of 1.70 m/s. Then it narrows to 2.70 cm. What is the pressure in the narrow region if water behaves as an ideal fluid?
6) Air at 288 K and 275 kPa abs enters a pipe and is flowing in...
6) Air at 288 K and 275 kPa abs enters a pipe and is flowing in isothermal compressible flow in a commercial pipe having an ID of 0.080 m. The length of the pipe is 60 m. The mass velocity at the entrance to the pipe is 165.5 kg/m2 · s. Assume 29 for the mol ecular weight of air. Calculate the pressure at the exit.
Fluid with a specific gravity of 1.3 is flowing through a pipe of 1.1 m diameter....
Fluid with a specific gravity of 1.3 is flowing through a pipe of 1.1 m diameter. Considering dynamic viscosity of 0.3 N.s/m2 determine the type of flow for a velocity of 1.6 m/s, 0.36 m/s and 0.52 m/s respectively.
An ideal fluid of density 0.9 X 103 kg/m3 flows through a level pipe with radius...
An ideal fluid of density 0.9 X 103 kg/m3 flows through a level pipe with radius 0.5 cm at a velocity of 6 m/s, the pressure in the fluid is 1.3 X 105 N/m2. This pipe connects to a second pipe also level and with a radius of 1.5 cm into which the fluid continues. (a) What is the velocity in the larger pipe? (b) What is the pressure in the larger radius pipe?
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe...
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe is 2.3 cm, and the radius of the nozzle is 0.41 cm. The speed of the water in the pipe is 0.74 m/s. Treat the water as an ideal fluid, and determine the absolute pressure of the water in the pipe.
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe...
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe is 1.8 cm, and the radius of the nozzle is 0.51 cm. The speed of the water in the pipe is 0.70 m/s. Treat the water as an ideal fluid, and determine the absolute pressure of the water in the pipe.