Question

2) A small circular hole 6.00 mm in diameter is cut in the side of a...

2) A small circular hole 6.00 mm in diameter is cut in the side of a large water tank, 15.0 m below thewater level in the tank.The top of the tank is open to the air.Find:(a) The absolute pressure at the depth of the hole if it were plugged. (b) The speed of the water flowing out of the tank.(c) The volume of water discharged per second.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Two circular holes, one larger than the other, are cut in the side of a large...
Two circular holes, one larger than the other, are cut in the side of a large water tank whose top is open to the atmosphere. The center of one of these holes is located twice as far beneath the surface of the water as the other. The volume flow rate of the water coming out of the holes is the same. (a) Decide which hole is located nearest the surface of the water. The smaller hole The larger hole (b)...
A large storage tank, open at the top and filled with water, develops a small hole...
A large storage tank, open at the top and filled with water, develops a small hole in its side at a point 16.8 m below the water level. The rate of flow from the leak is found to be 3.00 10-3 m3/min. (a) Determine the speed at which the water leaves the hole. 22.22 Incorrect: Your answer is incorrect. The water speed at the top of the tank can be assumed to be zero since the flow rate from the...
A 2 inch diameter hole is in the side of a water tank, and it is...
A 2 inch diameter hole is in the side of a water tank, and it is located 10 feet below the water level in the tank. What is the velocity of water exiting the hole and how will the velocity of the water exiting the hole change as the tank empties?
A large water tank, open at the top, has a small hole in the bottom. When...
A large water tank, open at the top, has a small hole in the bottom. When the water level is 5 m above the bottom of the tank, the speed of the water leaking from the hole: (Use ! = 10 N/kg.) [Hint: Use Bernoulli
A closed and elevated vertical cylindrical tank with diameter 2.20 m contains water to a depth...
A closed and elevated vertical cylindrical tank with diameter 2.20 m contains water to a depth of 0.900 m . A worker accidently pokes a circular hole with diameter 0.0180 m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103Pa at the surface of the water. Ignore any effects of viscosity. Part A Just after the hole is made, what is the...
A large storage tank, open to the atmosphere at the top and filled with water, develops...
A large storage tank, open to the atmosphere at the top and filled with water, develops a small hole in its side at a point 14.0 m below the water level. If the rate of flow from the leak is 2.20 ✕ 10−3 m3/min, determine the following. (a) Determine the speed at which the water leaves the hole. m/s (b) Determine the diameter of the hole. mm
Water leaks out of a small hole in the side of a bucket. The hole is...
Water leaks out of a small hole in the side of a bucket. The hole is a distance d below the surface of the water, and the diameter of the hole is much smaller than the diameter of the bucket. Principles Example 18.9 derived an expression for the speed v2 at which water exits the hole by assuming that v1 ≈ 0 for the speed at which the water surface moves downward. Derive an expression for v2 when v1 cannot...
A circular plate of 0.61 m diameter is situated in the vertical side of a water...
A circular plate of 0.61 m diameter is situated in the vertical side of a water tank with its centre1.22 m below the level of the free surface. If the plate is hinged about the horizontal diameter, what force must be applied at the top point to just hold it still? To what depth must the hinge axis be lowered to reduce the closing force to zero?
A large water storage tank is open at the top and the side walls are vertical....
A large water storage tank is open at the top and the side walls are vertical. The water in the tank has depth H. A small hole appears in one of the tanks at a height h above the base. (a) At what distance R from the foot of the wall does the emerging stream strikes the horizontal ground. (b) At what height h above the base is the hole if the water reaches its greatest distance from the base...
A closed and elevated vertical cylindrical tank with diameter 1.40 m contains water to a depth...
A closed and elevated vertical cylindrical tank with diameter 1.40 m contains water to a depth of 0.800 m . A worker accidently pokes a circular hole with diameter 0.0140 m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103Pa at the surface of the water. Ignore any effects of viscosity. Questions 1. How much time does it take for all the...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT