Question

An airplane in flight is subject to an air resistance force proportional to the square of...

An airplane in flight is subject to an air resistance force proportional to the square of its speed v. But there is an additional resistive force because the airplane has wings. Air flowing over the wings is pushed down and slightly forward, so from Newton's third law the air exerts a force on the wings and airplane that is up and slightly backwardThe upward force is the lift force that keeps the airplane aloft, and the backward force is called induced drag. At flying speeds, induced drag is inversely proportional to v2, so that the total air resistance force can be expressed by Fair=αv2+β/v2, where α and β are positive constants that depend on the shape and size of the airplane and the density of the air. To simulate a Cessna 150, a small single-engine airplane, use α = 0.270 N⋅s2/m2 and β = 3.56×105 N⋅m2/s2 . In steady flight, the engine must provide a forward force that exactly balances the air resistance force.

A) Calculate the speed at which this airplane will have the maximum range (that is, travel the greatest distance) for a given quantity of fuel.

B) Calculate the speed for which the airplane will have the maximum endurance (that is, will remain in the air the longest time).

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
An airplane of mass 1.6 ? 104 kg is moving at 62 m/s. The pilot then...
An airplane of mass 1.6 ? 104 kg is moving at 62 m/s. The pilot then revs up the engine so that the forward thrust by the air around the propeller becomes 7.4 ? 104 N. If the force exerted by air resistance on the body of the airplane has a magnitude of 6.0 ? 104 N, find the speed of the airplane after it has traveled 500 m. Assume that the airplane is in level flight throughout this motion....
To maintain a constant speed, the force provided by a car’s engine must equal the drag...
To maintain a constant speed, the force provided by a car’s engine must equal the drag force plus the force of friction of the road (the rolling resistance). Assume that the drag coefficient for a Toyota Camry is 0.28, while for a Hummer it is 0.64. The density of air at this temperature is 1.21 kg/m3. s1 = 62 km/h s2 = 110 km/h A) What is the drag force at 62 km/h for a Toyota Camry? (Drag area is...
12) There are several types of drag on a car other than air resistance. Effects having...
12) There are several types of drag on a car other than air resistance. Effects having to do with the squeezing of the tires (rolling resistance) and frictional forces in the drivetrain (the system that transfers energy from the engine to the rotation of the wheels) also must be taken into account. Engineers use the following equation to model the total force due to these different effects Fdrag=A+Bv+Cv2Fdrag=A+Bv+Cv2 For a Camry, these coefficients are estimated to be A=117.130A=117.130 N, B=1.800...
12) There are several types of drag on a car other than air resistance. Effects having...
12) There are several types of drag on a car other than air resistance. Effects having to do with the squeezing of the tires (rolling resistance) and frictional forces in the drivetrain (the system that transfers energy from the engine to the rotation of the wheels) also must be taken into account. Engineers use the following equation to model the total force due to these different effects Fdrag=A+Bv+Cv2Fdrag=A+Bv+Cv2 For a Camry, these coefficients are estimated to be A=117.130A=117.130 N, B=1.800...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT