Question

[1] A 10 turn coil is wrapped tightly around the center of a long solenoid with...

[1] A 10 turn coil is wrapped tightly around the center of a long solenoid with 6000 turns per meter. When the current in the solenoid is decreasing by 0.5 A/s, calculate the current induced in the 10 turn coil if it has a resistance of 5 ohm and the area of the solenoid opening is 0.01 m2. Give the direction of the current if the original solenoid current was clockwise.

Homework Answers

Answer #1

The flux through the coil is decreasing because of the decreasing current in solenoid which causes the decrease in magnetic field. Hence current induced in coil will be in such a direction so that it strengthens the decreasing flux. Hence the current induced direction must be clockwise.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A coil of 40 turns is wrapped around a long solenoid of cross-sectional area 7.5*10^-3. The...
A coil of 40 turns is wrapped around a long solenoid of cross-sectional area 7.5*10^-3. The solenoid is 0.50 m long and has 500 turns. The current in the solenoid is given by the function: I(t)=3t-5(A). (a) What is the induced emf in the coil? (b) The outer coil is replaced by a coil of 40 turns whose radius is three times that of the solenoid. What is the induced emf in this coil?
2) A square coil with an initial area of 11 m2, is wrapped once and is...
2) A square coil with an initial area of 11 m2, is wrapped once and is placed in the x-y plane a magnetic field in the -z direction of 0.5 T. The area of the coil is changed in a time of 0.8 seconds. The resistance of the square coil is 9 Ohms, and when the areas is changed, an induced current of 0.4 amps running clockwise around the coil. What is the final area of the coil in m2?  
A 550-turn solenoid, 28cm long, has a diameter of 2.9cm . A 16-turn coil is wound...
A 550-turn solenoid, 28cm long, has a diameter of 2.9cm . A 16-turn coil is wound tightly around the center of the solenoid...If the current in the solenoid increases uniformly from 0 to 4.2A in 0.50s , what will be the induced emf in the short coil during this time? pleased help and explain..:)
A 410-turn solenoid, 21 cmcm long, has a diameter of 2.0 cmcm . A 17-turn coil...
A 410-turn solenoid, 21 cmcm long, has a diameter of 2.0 cmcm . A 17-turn coil is wound tightly around the center of the solenoid. Part A If the current in the solenoid increases uniformly from 0 to 5.9 AA in 0.65 ss , what will be the induced emf in the short coil during this time?
A 310 turn solenoid with a length of 23.0 cm and a radius of 1.60 cm...
A 310 turn solenoid with a length of 23.0 cm and a radius of 1.60 cm carries a current of 1.85 A. A second coil of four turns is wrapped tightly around this solenoid, so it can be considered to have the same radius as the solenoid. The current in the 310 turn solenoid increases steadily to 5.00 A in 0.900 s. (a) Use Ampere's law to calculate the initial magnetic field in the middle of the 310 turn solenoid....
Problem 21.12 A 700-turn solenoid, 21cm long, has a diameter of2.9cm . A 18-turn coil is...
Problem 21.12 A 700-turn solenoid, 21cm long, has a diameter of2.9cm . A 18-turn coil is wound tightly around the center of the solenoid. Part A) If the current in the solenoid increases uniformly from 0 to 4.6A in 0.55s , what will be the induced emf in the short coil during this time? Express your answer to two significant figures and include the appropriate units.
A 390-turn solenoid, 20 cmcm long, has a diameter of 3.6 cmcm . A 14-turn coil...
A 390-turn solenoid, 20 cmcm long, has a diameter of 3.6 cmcm . A 14-turn coil is wound tightly around the center of the solenoid. If the current in the solenoid increases uniformly from 0 to 5.3 AA in 0.7 ss , what will be the induced emf in the short coil during this time? Express your answer using two significant figures.
1. A solenoid with a radius of 10 cm and a turns density of 1 million...
1. A solenoid with a radius of 10 cm and a turns density of 1 million per meter has a current circulating counter-clockwise and decreasing at 5 mA/s. It sits inside a squat coil of 2000 turns with twice the solenoid's radius and wound in the same direction. Find the magnitude and direction of the current induced in the coil if its resistance is 10 Ω. Use 1.2 µT·m/A for the permeability. 2. Find the maximum voltage amplitude of an...
A solenoidal coil with 30 turns of wire is wound tightly around another coil with 300...
A solenoidal coil with 30 turns of wire is wound tightly around another coil with 300 turns. The inner solenoid is 25.0 cm long and has a diameter of 2.20 cm . At a certain time, the current in the inner solenoid is 0.150 A and is increasing at a rate of 1700 A/s . PART A For this time, calculate the average magnetic flux through each turn of the inner solenoid. PART B For this time, calculate the mutual...
a) A 550-turn solenoid, 28 cm long, has a diameter of 2.3 cm . A 15-turn...
a) A 550-turn solenoid, 28 cm long, has a diameter of 2.3 cm . A 15-turn coil is wound tightly around the center of the solenoid. If the current in the solenoid increases uniformly from 0 to 4.6 A in 0.60 s , what will be the induced emf in the short coil during this time? b) A 15.5-cm-diameter loop of wire is initially oriented perpendicular to a 1.4-T magnetic field. The loop is rotated so that its plane is...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT