Question

A person with mass mp=80 kg is standing at rest on a horizontal, frictionless surface holding...

A person with mass mp=80 kg is standing at rest on a horizontal, frictionless surface holding a ball of wet clay with mass mg=10 kg . In front of the person is a large block with mass M=20 kg at rest next to a spring with stiffness k=100 N/m . The person throws the ball horizontally, it sticks to the block, and then ball and block slide and compress the spring a distance 1=0.75 m away from equilibrium before the ball-block springs back toward the person. (Assume the distance the ball is thrown is short, so that we can ignore the vertical component of its velocity.)

a) Find v P1 (the speed of the person after the ball was thrown)

b) Find Vs (the speed at which the person, ball, and block move after the ball and block bounced back off the spring and collided with the person)

c) If it takes 0.2 seconds for the person and the ball-block to get to the same velocity, find the impulse on the person due to the ball-block. AND find the force on the person due to the ball-block,

(Please be careful in your answer in part b because the person is also moving after he throws the ball. So, this will effect the final answer for their overall speed. And, please don't copy from others. They are all wrong. Thanks.

Homework Answers

Answer #1


write in comment box in case of any doubt

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
On a horizontal, frictionless surface, a 0.50-kg mass is at rest at x=0, attached to a...
On a horizontal, frictionless surface, a 0.50-kg mass is at rest at x=0, attached to a wall by a spring whose spring constant is 5.0 N/m. I throw a 0.10-kg lump of clay at the mass with speed 3.0 m/s, and at time t=0 the lump hits the mass and sticks to it. (a) Where and when does the block first come to a stop? (b) How fast is the block moving when it gets back to x=0?
A wooden block is at rest on a frictionless horizontal surface and is connected to a...
A wooden block is at rest on a frictionless horizontal surface and is connected to a spring (k =150 N/m). The mass of the wooden block is 0.10 kg. A bullet (mass 0.012 kg) and velocity 270 m/s is fired horizontally into the wooden block. After collision the bullet stays in the block. (a) Find the speed of the bullet-block system right after the collision. (b) If the bullet-block system compresses the spring by a maximum of d. Find d
A block of mass M = 5.80 kg, at rest on a horizontal frictionless table, is...
A block of mass M = 5.80 kg, at rest on a horizontal frictionless table, is attached to a rigid support by a spring of constant k = 6250 N/m. A bullet of mass m = 8.30 g and velocity of magnitude 570 m/s strikes and is embedded in the block (the figure). Assuming the compression of the spring is negligible until the bullet is embedded, determine (a) the speed of the block immediately after the collision and (b) the...
Block 2 with mass m2=5.0 kg is at rest on a frictionless surface and connected to...
Block 2 with mass m2=5.0 kg is at rest on a frictionless surface and connected to a spring constant k=64.0 N/m. The other end of the spring is connected to a wall, and the spring is initially at its equilibrium (unstretched) position. Block 1 with mass m1=10.0 is initially traveling with speed v1=4.0 m/s and collides with block 2. The collision is instantaneous, and the blocks stick together after the collision. Find the speed of the blocks immediately after the...
In the figure, block 2 (mass 1.60 kg) is at rest on a frictionless surface and...
In the figure, block 2 (mass 1.60 kg) is at rest on a frictionless surface and touching the end of an unstretched spring of spring constant 128 N/m. The other end of the spring is fixed to a wall. Block 1 (mass 1.70 kg), traveling at speed v1 = 5.80 m/s, collides with block 2, and the two blocks stick together. When the blocks momentarily stop, by what distance is the spring compressed?
A block of mass M = 5.60 kg, at rest on a horizontal frictionless table, is...
A block of mass M = 5.60 kg, at rest on a horizontal frictionless table, is attached to a rigid support by a spring of constant k = 5860 N/m. A bullet of mass m = 9.20 g and velocity ModifyingAbove v With right-arrow of magnitude 660 m/s strikes and is embedded in the block (the figure). Assuming the compression of the spring is negligible until the bullet is embedded, determine (a) the speed of the block immediately after the...
Blocks A (mass 3.5 kg) and B (mass 5.5 kg) move on a frictionless, horizontal surface....
Blocks A (mass 3.5 kg) and B (mass 5.5 kg) move on a frictionless, horizontal surface. Initially, block B is at rest and block A is moving toward it at 2.0 m/s. The blocks are equipped with ideal spring bumpers (as in Example 8.10, Section 8.4). The collision is head-on, so all motion before and after the collision is along a straight line. (a) Find the maximum energy stored in the spring bumpers, in Joules. (b) Find the velocity of...
A 2.00 kg block slides on a frictionless, horizontal surface with a speed of 5.10 m/s,...
A 2.00 kg block slides on a frictionless, horizontal surface with a speed of 5.10 m/s, until colliding head-on with, and sticking to, a 1.00 kg block at rest. A) Find the speed of the combination after the collision. B) The two blocks continue to slide together until coming in contact with a horizontal spring and eventually brought to rest. If the blocks compress the spring 10.0 cm, find the spring constant of the spring. C) How much work did...
Blocks A (mass 5.00 kg) and B (mass 7.00 kg) move on a frictionless, horizontal surface....
Blocks A (mass 5.00 kg) and B (mass 7.00 kg) move on a frictionless, horizontal surface. Initially, block B is at rest and block A is moving toward it at 4.00 m/s. The blocks are equipped with ideal spring bumpers. The collision is head-on, so all motion before and after the collision is along a straight line. Let +x be the direction of the initial motion of block A. Find the maximum energy stored in the spring bumpers. Find the...
The horizontal surface on which the block slides is frictionless. The speed vi of the block...
The horizontal surface on which the block slides is frictionless. The speed vi of the block of mass m= 2.0 kg before it touches the spring is 10 m/s. After the spring is compressed by 0.20 m, the block starts to move back to the right. What is the velocity vf of the block in m/s when the spring is compressed by 0.15m ?