Question

Blood flows at 0.0065 kg/s through an artery of diameter 8 mm and length 350 mm....

Blood flows at 0.0065 kg/s through an artery of diameter 8 mm and length 350 mm. It enters the artery at 36.5°C and leaves it at 34.0°C. Calculate the rate of heat transfer from the blood, the mean heat flux through the artery wall, and the mean velocity of the blood. (Note: the thermophyhsical properties of blood may be approximated by properties of liquid water at 37°C.)

Science   Advanced-Physics   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A 12 meter long and 12 mm inner diameter smooth pipe is used to heat a...
A 12 meter long and 12 mm inner diameter smooth pipe is used to heat a liquid in an industrial process. The liquid enters the pipe at a temperature of 25o C and a mean velocity of 0.80 m/s. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the pipe so that the fluid exits at 75o C. The fluid average properties are ? = 1000 kg/m3 , Cp = 4000 J/kg·K,...
Used engine oil flows at 0.025 m/s through a 12.5-mm-diameter tube. The oil enters the tube...
Used engine oil flows at 0.025 m/s through a 12.5-mm-diameter tube. The oil enters the tube at a temperature of 27 ºC, while the tube surface temperature is maintained at 87º C. Determine the oil outlet temperature for a 100-m and the total heat transfer.
Mercury at an inlet temperature of 75 °C flows through a 2 cm inside diameter tube...
Mercury at an inlet temperature of 75 °C flows through a 2 cm inside diameter tube at a flow rate of 1.5 kg/s. This tube is part of a nuclear reactor in which heat can be generated uniformly at any desired rate by adjusting the neutron flux level. Determine convection heat transfer coefficient, and the heat flux required for a 1.5 m length of tube required to raise the temperature of the mercury to 275 °C. Also determine if mercury...
A 5 kg cylinder of diameter (Di) 100 mm and length (L) 200 mm falls through...
A 5 kg cylinder of diameter (Di) 100 mm and length (L) 200 mm falls through a lubricated bearing of diameter (Do) 101 mm. If the cylinder is falling at a terminal velocity of 1.5 m/s determine the absolute viscosity oil of the oil surrounding the sides of the cylinder.
An aluminum fin 1.6 mm thick surrounds a tube 2.5 cm in diameter. The length of...
An aluminum fin 1.6 mm thick surrounds a tube 2.5 cm in diameter. The length of the fin is 12.5 mm. The tube-wall temperature is 200◦C, and the environment temperature is 20◦C. The heat-transfer coefficient is 60 W/m2 · ◦C. Consider the heat dissipated in a pipe 1.20 m long if the fins are 4.2 mm apart from center to center Explain your procedure with formulas
(a) Fluid at a mass flow rate of 0.352 kg/s flows through a tube with a...
(a) Fluid at a mass flow rate of 0.352 kg/s flows through a tube with a diameter of 15 mm and a length of 25 m. The inner surface of the tube is heated with a uniform heat flux of 1000 W/m2. Measurements shown that the inlet temperature of the fluid is 30 ˚C. Assume the outer surface of the tube is perfectly insulated. Consider the thermophysical properties of the fluid are as follows: density ρ = 1000 kg/m3, specific...
Liquid water flows in a long pipe of internal diameter of D = 0.01 m at...
Liquid water flows in a long pipe of internal diameter of D = 0.01 m at a mean velocity of V = 0.065 m/s. The pipe is maintained at a constant and uniform surface temperature. Assume the flow is both hydrodynamically and thermally fully developed. For simplicity, evaluate the properties of water at 300 K. Calculate the convective heat transfer coefficient of the flow inside the pipe in W/m2K?
Air is heated as it flows through a constant diameter tube. The air enters the tube...
Air is heated as it flows through a constant diameter tube. The air enters the tube at 50 psia and 80 F with an average velocity of 10 ft/s at the entrance. The air leaves at 45 psia and 255 F. a) Sketch the control volume b) Determine the average velocity of the air (ft/s) at the exit c) If 23 lbm/min of air is to be heated, what diameter (in.) tube is required?
Liquid water at velocity of 2 m/s and temperature of 15 °C flows over a flat...
Liquid water at velocity of 2 m/s and temperature of 15 °C flows over a flat plate. The plate has a width of 1 m, length of 0.4 m and surface temperature of 37 °C. Determine: (a) the average heat transfer coefficient. (b) the convection heat transfer rate from the top surfacc of the platc.
Steam flows through a turbine at a rate of 30 kg/s. It enters the turbine at...
Steam flows through a turbine at a rate of 30 kg/s. It enters the turbine at 600 degrees C and 4 MPa and leaves at 300 degrees C and 600 kPa. (a). If the turbine is operated adiabatically, what is the power produced by the turbine? (MW) (b). It is discovered that this turbine only produces 15.444 MW of power, what is rate of energy loss due to heat transfer? (kW) (c). Given the actual rate of work supplied by...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT