Question

A steel piano wire (Y = 200 GPa) has a diameter of 0.780 mm. At one...

A steel piano wire (Y = 200 GPa) has a diameter of 0.780 mm. At one end it is wrapped around a tuning pin of diameter 8.00 mm. The length of the wire (not including the wire wrapped around the tuning pin) is 66.0 cm. Initially, the tension in the wire is 379 N. To tune the wire, the tension must be increased to 407 N. Through what angle must the tuning pin be turned?

(θ = answer°)

Science   Physics   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1


0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A steel piano wire (Y = 200 GPa) has a diameter of 0.790 mm. At one...
A steel piano wire (Y = 200 GPa) has a diameter of 0.790 mm. At one end it is wrapped around a tuning pin of diameter 8.00 mm. The length of the wire (not including the wire wrapped around the tuning pin) is 66.0 cm. Initially, the tension in the wire is 381 N. To tune the wire, the tension must be increased to 413 N. Through what angle must the tuning pin be turned?
A steel wire in a piano has a length of 0.900 m and a mass of...
A steel wire in a piano has a length of 0.900 m and a mass of 5.800 ✕ 10−3 kg. To what tension must this wire be stretched so that the fundamental vibration corresponds to middle C (fC = 261.6 Hz on the chromatic musical scale)? N
2. Suppose a piano tuner stretches a steel piano wire 6.5 mm. The wire was originally...
2. Suppose a piano tuner stretches a steel piano wire 6.5 mm. The wire was originally 0.825 mm in diameter, 1.43 m long, and has a Young's modulus of 2.10x1011 N/m2. Calculate the force a piano tuner applies to stretch the steel piano wire in Newtons. F=__________ 3. Suppose a 66-kg mountain climber has a 0.86 cm diameter nylon rope. By how much does the mountain climber stretch her rope, in centimeters, when she hangs 43 m below a rock...
A steel and aluminum wire, each of length L and diameter d, are joined to make...
A steel and aluminum wire, each of length L and diameter d, are joined to make a single wire of length 2L and diameter d. The wire is attached to fixed supports so that it is straight but with negligible tension. After being cooled by a change in T, the aluminum is found to have increased in length by 0.0140% (and the steel decreased in length by the same percentage.) If d = 1.00 mm, find: (a) the difference in...
A small steel wire of diameter 1.3 mm is connected to an oscillator and is under...
A small steel wire of diameter 1.3 mm is connected to an oscillator and is under a tension of 5.1 N . The frequency of the oscillator is 55.0 Hz and it is observed that the amplitude of the wave on the steel wire is 0.56 cm . a) What is the power output of the oscillator, assuming that the wave is not reflected back? P = ... W b) If the power output stays constant but the frequency is...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT